dasatcopthorne
Members-
Posts
2,916 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Blogs
Gallery
Events
Exhibition Layout Details
Store
Everything posted by dasatcopthorne
-
Hi Guys. I little help please? Have just fitted a Legonman Class 73 ESU V5 chip and wondered if an 'F Key' sound can be changed to random On F7 is the Compressor. It gived the sound slot number in the Function Map. Is it likely that this could be changed to a random event? If so, how pleae? Dave
-
You may consider my description incorrect but it certainly isn't misleading in the slightest. But thanks for your very kind comments. Dave.
-
Power districts are mostly used to Stop a short in one area from stopping trains in another. For example, on a terminus to fiddeyard layot there might be locos with lights on or diesels ticking over or steam locos making appropriate sounds in the terminus and someone causes a short in the fiddle yard. The fiddle yard are will cut out but the terminus stuff will continue to 'run'. So double track gaps and each area fed through a District Cutout. The cutouts are fed from the same bus. If you're not worried about a short shutting down the whole layot then don't bother with them.
-
Is it the Decoder or the Loco causing NCE PowerCab to trip?
dasatcopthorne replied to Damo666's topic in DCC Help & Questions
Put decoder in another loco. Dave. -
Useful NCE Powercab PCP Panel modification.
dasatcopthorne replied to F-UnitMad's topic in DCC Help & Questions
Crimping pliers on eBay about £9. P.ugs very cheap. Dave -
Very helpful but what are they and where do you get them please ?
-
-
A very few of you will have seen posts regarding this H0 layout in the 'Exhibition' section but little else has appeared here. Built and owned by our Club Member, Graham Broad, in 2019 it won the Continental Modeller mag Best Layout at the Warley show. I thought it was about time to post a few pics. Dave.
- 3 replies
-
- 11
-
The AS Class 37 was my first ever Factory sound fitted loco. In the past I have always fitted my own using Legoman chips (34 now) and I've learnt my lesson the hard way. 😭 Back to Legoman as I need a re-blow or two soon to keep up with developments. Dave.
-
Very kind of you to offer Charlie and much appreciated. Unable to take up the offer though, as I just couldn't stand the set up, it was so bad. It's now with a new loving owner and I made £10. Thanks once again Charlie. Dave Smith
-
Dapol 73 chassis will it fit a Lima body?
dasatcopthorne replied to ptrabant's topic in Modelling Questions, Help and Tips
I have literally, just now, tried it. It fits with a tiny bit removed from the Lima body at the very bottom of two front coners. You will need to find if the Dapol cabs fit though as I'm not in a position to try them. The Lima boy sits on the Dapol buffer beams just like the Dapol body. Dave. -
I wanted a refund for my 37 because reducing the volume to allow the loco to run was not satisfactory in my eyes. However, they would not accept that I could have a refund so it went back to them. Two weeks later and its back and cured. However, the quality of sound is not upto scratch. I'm beginning to think this is a sound file by ESU. Good sound on start up and pulling away. Tickover is barely audible thought. Its going to be sold and will be the first and last AS loco I own. Dave.
-
In my experience most Bachamann locos need the grease clea ed out of the bogies, the fickups adjusted outwards nad then lightly re greased . Always works for me. Dave.
-
Try Scale3D Dave.
-
Tarpaulin Material ?
dasatcopthorne replied to jackshobbies's topic in Modelling Questions, Help and Tips
I made this using a Youtube vid from somewhere. 3/4 sheets of tissue paper together soaked with watered PVA and whilst still slightly wet, moulded over the end of a wagon. When dry, black thread used to secure ans then weathered. Dave. -
On my own layout, I use Servos for turnouts so a juicer is perfect. Dave.
-
On our layout where they are in use, we have hand operated points (fiddleyard entry/exit) and 2 of the frogs are on a diamond. Dave.
-
We discovered that the problem with fully solid state juicers is the power rating capacity. One loco mostly seems to be fine but beware of locos that draw more current than the juicer components can handle. Dave.
-
Southern Region Concrete Signal Gantries
dasatcopthorne replied to ikcdab's topic in UK Prototype Questions
-
Southern Region Concrete Signal Gantries
dasatcopthorne replied to ikcdab's topic in UK Prototype Questions