mozzer models

Andy how are the Model rail readers nowing about the vote as i can not see anything in the latest issue & how can the voting be in No164 if the votes are still been taken till 3rd Dec when No 164 is out on the 1st

Got some more done to the Quadart set Its now in Maroon & i have built up the rest of the bogies once the maroon has had a day or so to dry i will mask of & paint the underframes & ends black 001 by Mozzer models, on Flickr 002 by Mozzer models, on Flickr

the kit only tuck time in finding the parts on the etch there were No fiddeling to get things to fit so that saved time Mr Finney has got back to me about the brakes quort Well spotted, you are quite correct. Please accept my sincere apologies. The error has occurred when I have drawn Fig.5, and also Fig. 6 which is also wrong, by editing Fig.4. I should have reversed the brake pull rods.

i built it as per the kit but now i have finished it & looking yes the brakes or lever is the wrong way looking on the finney web site link below the kit in the 1st & 2nd photo is built the same as i have http://website.lineone.net/~cbwesson/4mm%20LSWR%20Van%20photos%20page%20%202.htm

Well i got the sides & ends solded togetter & the roof & top door runner glued on next is a primmer coat 002 by Mozzer models, on Flickr 003 by Mozzer models, on Flickr 004 by Mozzer models, on Flickr

Back to working on the Finney kit today so far i have built up the sides & ends only using solder.I have just given them a wash & once i have had lunch i hope to get the 4 parts solded to getter 001 by Mozzer models, on Flickr

got some more done to the Quad art set the bodys are on the underframes & ready for painting & i have built up 2 of the 5 Gresley 8foot bogies which have been put under the brake 3rd 002 by Mozzer models, on Flickr 003 by Mozzer models, on Flickr 004 by Mozzer models, on Flickr 005 by Mozzer models, on Flickr 005 by Mozzer models, on Flickr

well goth the next 3 underframes built up for the Quad-Art 001 by Mozzer models, on Flickr off to start building up the bodys

i will be working on the Quad-Art again tomorrow

one of the jobs this week is a Martin Finney LSWR low roof van kit Dia 1410 & as i do not normally build wagons i have put this build in My Blog so far i have got the chassie to a rolling stage & there are 26 parts to it the build is taking a lot longer than it takes me to build a coach as the kit Can build to any of 3 Diagrams which can have any of 5 brake types & 2 axle boxes so just finding the part takes longer than fitting it the one i am building is to dia 1410 fitted with morton brakes & panter axle boxes 001 by Mozzer models, on Flickr 002 by Mozzer models, on Flickr 003 by Mozzer models, on Flickr

see the 1st post in the topic

All down to the D&S kit well thought out as to how it go's togetter very nice to work on

the bridge is 4mm & not 2mm

been repaint a GWR railcar but as i removed the old paint it went back to a kit so it got a rebuild as well 4mm GWR Railcar built from the ambreco kit b by Mozzer models, on Flickr 4mm GWR Railcar built from the ambreco kit a by Mozzer models, on Flickr

One of the Jobs this week is a Ian Kirk kit of a Quad set today i have made a start on the Brake 3rd 001 by Mozzer models, on Flickr 002 by Mozzer models, on Flickr

Well i have now finished 4mm Metropolitan Rly Jubliee Stock brake 3rd No360 built from the Bill Bedford Etches & 247 development 4mm Metropolitan Rly Jubliee Stock brake 3rd No360 built from the Bill Bedford Etches & 247 development a by Mozzer models, on Flickr 4mm Metropolitan Rly Jubliee Stock brake 3rd No360 built from the Bill Bedford Etches & 247 development b by Mozzer models, on Flickr

now sellers can not leave bad feed back unless there tick good then wright a bad one it still show as green ebay did this to stop seller getting good feedback when there should have got bad by bulleing the buyer to leave the feed back with the thret off i will give you bad i you leave me bad