Jump to content
 

Bruce Depot

Members
  • Posts

    432
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Bruce Depot

  1. Having failed to find anything suitable here, have just ordered a new power supply from Coastal DCC, will advise the outcome when it arrives. fingers crossed!
  2. thanks, give that adaptor a miss then. Going to see what´s for sale here, then order from the UK if nil found...Christmas will get in the way mind!
  3. Just found a mains adaptor, only goes up to 12v but more importantly it has a switch to set the polarity, anyone now if it should be - or + for the plug centre? also 500ma unregulated, is that enough to get the power cab working?
  4. Thanks Brian Can confirm the control panel is as you say. Will look at options, if I buy a power supply off ebay etc, is there a certain plug size I need or are they a standard size?
  5. Just been and tried again, disconnected the track supply and plugged the power cable back in with the controller plugged in the left hand socket. Still totally dead with no life in it. Soony, I don´t use the curly one, and nothing else had been unplugged. royaloak-No its always left in situ, note from the photo about mind that the transformer seems to be part of the mains plug. USA style. Its not like a UK laptop cable with the transformer is part way it.
  6. Hi Ray Have not unpluged the controller from the circuit board, can confirm it is in the left socket mind as double checked that this morning before taking the mains cable to photo it. Will follow Brians suggest and not touch anything until Sunday and see if any change then.
  7. Thanks Brian, will leave alone and try it Sunday and see if any improvements. cheers Keith
  8. Thanks Chris I´ll look at getting a new power cable once Chrismas has passed and the post settles down a bit! cheers Keith
  9. Had a go at testing the power lead, seems dead? Wall socket and travel adaptor both tested and working fine. Can get no life (or noise) out of the 12 volt end of the lead. Has anyone else had problems like this with the NCE power lead, presume a new one is required, hopefully they can be brought on their own.....? thanks Keith
  10. How would I do that? I know the mains socket works, but is it likely the NCE mains plug/cable is now faulty? thanks
  11. Managed to find time this morning to doing a bit of running with the layout, first time for about 8 weeks. Anyway switched the mains plug on but NCE power cab and red light on circuit board both dead, I know the mains is working as the old Gauge master controller works when plugged in. I may have heard a click from the NCE cable mains plug when the power was switched on but not going to swear to it. Has anyone had this problem before? thanks Keith
  12. maybe they should have stayed in the shop then....
  13. Interesting story in the El Pais this morning Spanish train driver leaves 109 passengers stranded at end of shift
  14. Don´t the drivers need to route refresh this section? Would have expected a few ecs moves first...?
  15. David, when this is finished can you consider moving house to report on the Seattle Carlisle works please? :-) Been interesting reading and watching this come to a finish (almost) thanks very much. cheers Keith
  16. Seem to have a very high yes to action, out of interest what percent did vote? Did TSSA ballot in the end and if yes when is that result due?
  17. With Dover clogged up with ferry traffic, hows the replacement bus service doing?
  18. Cut the fence down, if somecome stops you ask on what order its closed?
  19. Always seem to remember about visiting the Hoe, how long the traffic lights seemed to take to change to pass through the tunnel! Continuing to watch from afar with interest. keith
  20. Struggling to work out what they are really doing with all the new Ballast delivered?
  21. Heading home, off the coast of Africa.(June 2015)
  22. Visited the shop at Bourton-on-the-Water when back in the UK in June, have to say the prices made my eyes water somewhat. Tourist prices came to mind!
  23. Out of interest, as the Seven Valley ever looked at going towards Stourport? I presume the trackbed in the town must have vanished but how close can you still get? keith
  24. Certainly looks good, wonder if there will be a follow on order for more... Also wonder what is next to be be brought/tried out Keith
×
×
  • Create New...