-
Posts
3,369 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Exhibition Layout Details
Store
Everything posted by Penlan
-
MR goods train classification question
Penlan replied to Nick Lawson's topic in UK Prototype Questions
In use by most Railway Companies from 1903, though I have adapted this for my own LNWR interests, but basically same for others including (within reason?) the Midland...... -
Fitting a ammeter after the change over switch?
Penlan replied to Penlan's topic in Electrics (non-DCC)
The Combi delivers < 12V. The bespoke controllers I have from some 40+ years ago are delivering < 16V, both types from a 18VAC supply. Having had a couple of problems, though unrelated to the electronics, with my own controllers and the person I'm doing the control panel for has requested Combi's + the Ammeters, I thought I would try the Combi's, especially as I now have 5 at an average cost of £15 each. That loss of < 4V between my old controllers and the Combi's means my loco's have a reduced top speed, in fact I might almost have to reduce the gear ratio's to get a decent speed from the loco's. Swings and roundabouts comes to mind. I'm putting my Combi electronics into my own boxes (hand held controllers) and they plug, via looooong walk-a-bout leads, into boxes with the Ammeter, plus a visible 12V, 21W car brake light bulb (BAY9S) in circuit to protect (a bit) against shortages. I'm aware there's a cut-out in the Combi circuit, but old fashioned Belt & Braces, and yes, somewhere at home I do have one of those controllers with brass studs and bits of resistance wire between each stud etc., Oh the joys of old style '0' gauge . Meanwhile, I'm getting there, both for the friend and myself. I must say I'm very grateful for all the guidance I've received on this posting, thank you. -
Fitting a ammeter after the change over switch?
Penlan replied to Penlan's topic in Electrics (non-DCC)
2 Ammeters arrived today from China?, both ordered as centre zero up to 1 amp either way. One as above t'other sweep zero to 1 amp only... I've been offered a £2 refund? Looking on Ebay, this supplier seemed to be the only one for these ammeters, all under different names, but John Sun's is the final address for all of them. -
Fitting a ammeter after the change over switch?
Penlan replied to Penlan's topic in Electrics (non-DCC)
Thankyou Kevinlms -
Fitting a ammeter after the change over switch?
Penlan replied to Penlan's topic in Electrics (non-DCC)
Not really relevant, but I wonder why Combi's have a RED LED to show that the power is being delivered to the track. The LED gets brighter the more voltage going through. 'Red' to me is 'danger', a short or similar, I find these LED's distracting. On my own hand held bespoke walk-a-bout controllers, I have a small green LED to show there's power to it - it doesn't vary, it source is straight from the input voltage (circa 15v DC). -
Fitting a ammeter after the change over switch?
Penlan replied to Penlan's topic in Electrics (non-DCC)
Porcy Mane, Thank you. I have an old Scalespeed controller in a separate box I use for test purposes, and on the face there's a also couple of (small) sockets for a Multimeter to plug into with a switch for either Volts or Ammeter testing. Had that a few years (40+ ?) now. -
Fitting a ammeter after the change over switch?
Penlan replied to Penlan's topic in Electrics (non-DCC)
Porcy Mane, many thanks, that looks the way to go for a de-constructed Combi. I shall also buy in a couple of centre zero's mentioned by kitpw, they look useful for this particular project. . Many thanks to you all for your help and observations, much appreciated. -
Fitting a ammeter after the change over switch?
Penlan replied to Penlan's topic in Electrics (non-DCC)
AC, the rectifier is tucked away between a heat sink and the 'main' board. -
I have been asked to build a couple of control panels incorporating cables to 'Combi' hand held controllers, and to include on the panels an ammeter for each controller, so the said person can see if the loco's etc., are drawing a sensible electric load, and are 'live' in section. The accepted practice would be to put the ammeter in circuit before the change over switch, but obviously the circuitry is all self contained (and difficult to get at) in the Combi hand held controller, even when I've 'de-constructed' them? I see you can get ammeters with a + / - reading (centre zero), though they all seem to come from China with a long delivery period and are a deep depth into the panel, unlike some UK ones I've had in the past. Would the + / - ones give me what I'm looking for after the direction switch? Or is there a 'cunning plan' to install an ordinary 0 - 1amp (etc.,) after the direction switch.
-
Derby Museum Midland Railway model
Penlan replied to ejstubbs's topic in Modelling musings & miscellany
I still have my guide from 1959. (Dated, 1957 edition) The four adverts at the back are for W&H Models, K's, CCW and Douglas Models (Halifax). 1s 3d, a lot of money in those days, uhmn, Pint of Mild was about a shilling, Rough Cider was 9p, in 1959 - memories of a misspent youth . -
SWAGfest ?
-
I've just had a look and it's Humbrol 24 on the 'old' tin (about 30 years old and still useable). I see I have two tins of 27, both a darkish Grey, but definitely different Greys. Ones relatively new - English origin and gooy, the others about 25 years old and in good condition. So, my apologies on that. Sometimes I have a numeracy block, which considering I use to be good at Maths, is a bit of a bind.
-
I also cut some grooves in the lead with a sharp point to form a better key for the Araldite (Other brands......). I have some wagons where the lead has been there 40+ years.
-
1900s MR - An Introduction
Penlan commented on MarshLane's blog entry in Midland Railway during the early 1900s in 2FS
Worcester Shrub Hill was a Joint Mid. GWR station, as staff vacancies became available they appointed them alternatively to each Company. I don't seem to have saved the date of the 1:500 series map, but I would have thought pre 1920. It was tucked away in some old cabinets in the City Engineers Office when I started there in 1972. -
1900s MR - An Introduction
Penlan commented on MarshLane's blog entry in Midland Railway during the early 1900s in 2FS
As you've mentioned Mid Rly Engine Sheds..... I presume there's a copy of the track plan for Worcester Mid Rly Engine Shed at Worcester, This is what I copied off a 1:500 O.S. plan some 50+ years ago. Just adding an idea to the mix. -
Very good lining. Because I seem to acquire all sorts of odd's and end's, I have numerous singular coach sides in THE box, and I sort of get myself into the mood for lining by doing some practice runs first, if nothing else it helps to become familiar with the 'flow' of the paint and/or the bow pen that day. I have an Electrical theory book from my HNC days (some 50+ years ago) that is just the right height to support my hand for 4mm coach sides, but you can hardly see the title for all the 'practice' runs from bow pens on it
-
Absolutely agree, the Scottish lineouts were embarrassing. They may be a bit rusty from a month off from playing together, but.......
-
I know the adverts on TV tend to target the viewing audience, but 'Erectile Dysfunction' during 6 Nations?
-
All4 - Can't register, even when I try their emailed instruction. Is it just me?