Jump to content
 

ThePipersSon

Members
  • Posts

    266
  • Joined

  • Last visited

Posts posted by ThePipersSon

  1. I have just been browsing the two 'bibles' from OPC and Wild Swan.

     

    No 18 was tested on the Brentford branch with up to 4 trailers (124 tons).  It was also tested Southall to Banbury with up to 2 trailers. There are photos of it with an autotrailer plus all-third coaches, as well as 7 horse boxes (with the comment that this would put it over the limit).

     

    There are also test results with one of the dual-ratio cars between Southall and Westbury. The results compare the different ratios with different loads of no,1 or 2 trailers.

     

    I have a picture of parcel car no 34 trailing 2 BGs.

     

    Tom

    • Like 2
  2. I received my subscription copy yesterday.  There were two address labels on the envelope, one partially covering the other.

     

    I contacted Cygnet and was told it was not a problem.  The first run of placing the labels on envelopes went wrong and they decided to rerun the whole run, reusing the envelopes.  The labels couldn't be removed so they just stuck new labels over the old ones.  As far as Cygent are aware, there are no missing subscription copies.

     

    Apart from that, what a great issue.

     

    Tom

  3. There were etched kits of Dreadnoughts available in 4mm.  Designed by M G Wynn,under the trade-mark Tru-scale models, manufactured by Taseko ltd. and the main distributor was E S Models (Blackpool).

     

    They are exceedingly rare these days (unless someone knows better).

     

    Tom

  4. According to the book, the original stock had gas lighting, but this was replaced towards the end of the first world war.

     

    The drawings in the book show both gas cylinders and battery boxes.  I believe the layout was a large box on one side, and a small box opposite.

     

    Tom

  5.  

    There is photographic evidence of a 2251 on 10 coaches on the MSWJR which included 1 in 75 gradients so they could pull a decent load but three would be a more typical load..

     

     

    The photograph I have seen  (District Controller's View no.11) Shows 2203 pulling an eight coach train - the 16.36 Southampton - Cheltenham.  Normally 3 coaches, it had been strengthened on the day with 5 extra coaches. The Manor pulling it failed at Ludgershall.  The only engine available was the one from the local pick-up goods, which was normally a Mogul, but on this day was 2203.  The train was 30 tons over the limit for an 0-6-0, but 2203 proceded to take the train to Cheltenham, there being no other engines available at Ludgershal, or on route.

  6. My first 47XX came with both cab foorsteps broken off, as well as a few other things.  My thoughts are that the inner packaging is not up to the job.

     

    Hattons provided a replacement which has no problems with broken or missing bits, and runs sweetly.

     

    Tom

  7.  

    I just noticed the other day an article by Trevor Pott in the Model Railway Journal #257 on page 219 where he describes scratch building a wing mirror for a 4 mm Oxford Austin 7 along with other details to model the Churston midwife's automobile.

     

    On the other hand it would be wonderful if someone makes an etch of mirrors for pre-1950 vehicles. 

     

    Trevor indicates he sourced the replacement fine spoked Austin 7 wheels from DG Models whose site is autocraft.plus.com.  However I did not see any separate 4 mm vehicle mirrors on their site.

     

    I'm not sure pre-1950 vehicles would have wing-mirrors.  I have checked a few photographs and they are not common.  Thinking about my first four cars (Ford Popular 103E, Morris Minor Traveller, Wolsley 1500, MG Midget mk1) the wing mirrors were very much an optional extra.  The accessory shops did  a nice line in replacements/original fitting.

    • Like 1
×
×
  • Create New...