Isambard Kingdom Brunel

Thanks Iain, I have edited that to read DC

I have a couple of DCC loco which are really indifferent runners on track, is there a way to check pickups in DCC. Using DC I used to have two pieces of wire which I could touch to individual wheels to test. I have read that DCC loco should work with DC, but mine dont seem to want to. Any advice please?

I have 3 baseboards each is connected to the control panel by a 25 pin cable, this handles, signals, turnouts, lighting etc. I have an idea! Could I connect the DCC controller (Prodigy Express) and distribute the power yo each baseboard through the 25 pin cables? Or will passing it through 1 metre long cables degradation the signal?

I have discovered the decoder on my Hattons 58XX is a Zimo. (CV8-145) The engine will drive but I get no sound anymore. I cannot find a list of functions for this loco, and wondered if one is available. I have found a PDF about Zimo decoders, but, Its a but confusing. Newbie to DCC, I have other locos working well, but, this one wont

Hi can anyone help with this coach, L&Y in Ormskirk. Is it an Autocoach/PushPull unit.

Does anyone know of a way of getting replacement accessory packs for Bachmann Class 121?

Ive been researching and modelling this branch for over 10 years originally in P4 (I gave up as I didn't have the skills to ensure precise running) Now in OO. As well as Cambrian 0-6-0, I have photo of Cambrian 0-4-4. When GWR took over 517 were the usual loco, with Dean Goods and Tanat Valley2-4-0. Collett 58xx took over as the main workhorse then into BR with Ivatt Class 2 and 74xx. This is the first photo I've seen of Dean Good in Llanfyllin, others are photos from Oswestry

Thanks. Would this loco have been Unlined GWR Green? There doesn't appear to be a logo on the tender

I have acquired thse photos of llanfyllin in 1925? I was wondering if there are any ideas of the loco Thanks

Thanks I filed a couple of Vees in the weight and put a couple of drops of superglue to hold the 4 wires. That seemed to sort it. Whilst I have the cab roof off I need to paint up some crew and jobs a gud un

Is there a paint which will act as an insulation if I paint it on a chassis? I keep getting a short as the clearance is a tad tight.

I have a 58xx version of this loco, which stopped running, it is about 4 years old fso out of warranty. I followed another thread on here about dismantling and managed to getthe body off and dismantled the chassis. Great. Found a loose wire, resoldered back on and motor runs. However. Reassembling the thing has got me stumped. I cannot get the body to fit close up to the footplate........ I think it is possibly the wiring between the block weight and the body, but I can't see anyway else to run it. Has anyone any ideas?

Smoke box and Izzy, Thanks I'll have a check tomorrow, too cold in shed at the moment

I have a Prodigy Express . I havent used it for about 4 months as Ive been working on another board. Plugged it in today, I get a power light, but, nothing happens on the track. I checked the voltage on the track and I have 3.7 v AC. Im really confused as last time I used it I had 15 V. I also checked the voltage at the output from the hub and getting similar. Any idea what is wrong?

Thanks. I did think that and did swap the connections over still no joy.

I have just bought a 4mm Dapol Junction Signal from DVV Supplies which is being sold as Grade 2 for £18.00 inc Postage. There is no Servo box included. I have sorted it with two Tower (G servos, but, I cannot get the LED to light. On the bottom of the signal there are three contacts , one common and one each for each LED. Two possibilities, (possibly more) 1. They are broke 2. there are some gubbins in the servo box to reduce voltage from 12v I'm not too worried as I have already powered two single Dapol signals with a servo and fitted them with Modelu Signal lights containing 1mm LED, however it would be easier if I could power the existing LED, does anyone have any ideas?

I want to try to build this signal from Llanfyllin, it was replaced by a bracket signal at some period during BR days for which I could use the Dapol signal. What could I use to build this massive post?

S3189-2.pdf Regarding the attached Signal diagram and the ground signal labelled 3, does it control the entrance to the turnout labelled 8 or the one to the left going to the goods loop? I believe in the other direction signal 11 controls the entrance to facing point 8 S3189-2.pdf

I drilled through the weight under the boiler to show some light

I would be interested to see what you are doing to convert the 14xx to a 517. I want to do one too

On my layout I have one of the older Dapol Semaphore Signals which was converted using a MERG module to work with my lever frame. I want to put two more onto the layout, the newer models seem to come supplied with a switch (centre off, I think), are these suitable to use with my lever frame? (Which uses On/Off microswitch)

I have found a couple of links to using Vallejo Paints for GWR, but, the links are broken. Does anyone have a working link which I could use. Thanks

Just found this thread, I live in Hindley and walk down the old Whelley loop through Amberswood with our dogs every day. We've looked at some old maps , but today at a caravan site in Devon I found Old DVDs of British Steam, one of them had a Section on Wigan and showed trains climbing the Whelley Loop through Amberswood west junction. I am building a model railway in my shed, however, I was bought up in GWR Country some trains are green with copper chimneys. Would love to know more about the Railways around Amberswood

Thanks for the reply, I am on Pocketmags App. Shame it would be a good addition to the Magazine