Since reading Part Three of the RCTS "Locomotives of the Great Western Railway" series, I have become fascinated by the first standard-gauge locomotives to run on the GWR. I shared some of my findings in a forum thread - now updated at https://www.rmweb.co.uk/blogs/entry/26175-early-gwr-absorbed-engines/
My interest has gradually become focused on GWR No.184, which was built by E.B.Wilson and Company for the Oxford, Worcester, & Wolverhampton Railway in 1853. It was photographed
I have written before in this blog about the convenience of using tender-drive for small 19th century locomotives, especially for 'single wheelers'.
In my earlier post, I described the conversion of two types of tender kit, both of which represented Dean 3000 gallon tenders. Since then, I've read 'GWR Tenders and all that' in drduncan's blog, which, amongst many other useful insights, showed the close similarity between Dean's 2500 gallon and 3000 gallon designs. He also comments on
In an earlier post in my blog, I described construction of a GWR Tilt Wagon, based on a photograph in a Forum Post by Wagonman. I also reported that, when Sir John saw it in North Leigh station, he commented that it might just hold all his daughter's hat boxes. So, I now call it my 'Hat Box'.
At the time of my earlier entry, I had designed and built the basic body and started adding some of the detail. Completing the rest has been a very fiddly task, using lots of rivet strip (from M
In my previous post, I described a little about the location of North Leigh station on the branch line to Witney, originally planned in 1849. For some reason, this line was omitted from Bartholomew's 1/2inch map of 1903 but I have restored it to its rightful position, in order to show the location of the station and its proximity to the tunnel through the ridge of high ground between North Leigh and New Yatt.
The later, cut-off, which allowed trains to run directly from the Worcester
When I started this blog, a year ago, I wrote that my aim was to follow the conversion of my existing layout to an earlier time-frame. In practice, I seem to have spent most of my time designing and constructing new stock, while I have done relatively little to the basic framework of the layout itself. So, for this post, I decided to make a start on some 'backdating' of the layout scenery. Fortunately, static features of the landscape tend to change much more slowly than vehicles: I often notice
In my previous post, I made the self-fulfilling prophesy that I would be distracted by the forum thread on GWR standard gauge 'tilt' wagons, started by drduncan. Initially there was some discussion as to whether the photo shown was, in fact, of a Broad Gauge wagon but the dimensions (especially the height) seemed sufficiently different to indicate that the vehicle under discussion was indeed Standard Gauge.
Something 'clicked' for me and I decided that I had to add one to my stock, s
My first post in the Forums was in July 2013 while I started this blog a little later, in August. I've not been doing much modelling recently, since other activities take up most of my time during the Summer months, but I do spend time thinking "where next?" and also taking stock of the past year.
A year ago, i had just started trying to re-create some late-19th century "atmosphere", while knowing rather little about how things were actually done. Thanks to the patience and help of m
I've been starting to get my 'painting eye' in, by working on some of my 19th-century vehicles, before I attempt any people.
For the Victoria carriage, described in previous posts, I first spayed the entire vehicle with red car primer. After that I painted the undergear, footboards, and folding hood with black acrylic. I chose Crimson Lake as the main body colour and painted all the relevant panels with Humbrol enamel (now RC403, though I used an ancient tinlet of HR116 - these paint
Oil lamps are continuing to prove awkward!
Following an appeal for help from the forums, I have established that the small circular fittings, adjacent to the lamp tops, are plugs to fill the apertures left when the lamps are removed for trimming and filling, rather than oil fillers, as I had originally thought.
I've now drilled the roof of my U29 model, to take the lamp tops and have another small problem to solve! Since the roof slopes down from the sides of the cleresto
The recent fine weather has kept me away from the modelling for a while, while I have been pursuing my outdoor photographic interests. I am also procrastinating a little, as my coaches are at the stage of needing a lot of fiddly detail work to be completed!
Because of my small radius curves, 'fine' flanged wheels are a bit unreliable, so I prefer to use 'Hornby' or 'Bachmann' wheels, which hold on pretty well round the corners! For my 6-wheel coaches, I decided to try 'MJT' Mansell w
Having built a Victorian train, I now have to think about providing some passengers. Since I know far less about 19th-century styles of dress than I did about 19th-century railways, when I started, I decided it was time for some reading.
As I pointed out in a previous post, I have found the Internet Archive ( http://archive.org/ ) to be a very useful resource. Old 'out of copyright' books can either be read on-line or downloaded in formats such as PDF. In my current search, I found '
As I mentioned in the previous post, I have been trying to track down a photo of the prototype of Sir John's special train.
Today, I have found one but unfortunately, the morning of April 1st 1892 was notable for the famous London 'pea-soup' fog.
Despite the photographer's best efforts he has been unable to capture much detail of the train. He has, however, used sepia toning very effectively to enhance the subject 🙂
Train in London Smog - 1st April '92
I've finally worked out a simpler method for constructing a clerestory roof, so now I have all the vehicles needed to take Sir John's family up to London for the season.
On my first U29 composite, described in recent posts, I folded the roof from a single sheet of 5 thou brass sheet but found it difficult to make the reverse folds correctly. For the family saloon, which I now believe to be Diagram G13, I have therefore made the roof in three parts - two separate sides and the raised
My photo alongside might look similar to the final one in my previous post but is, in fact, the result of a complete re-build, in an attempt to correct at least some of the mistakes I'd made!
I'd already found some of the problems in trying to adapt real drawings to an 00 gauge model, in that the wheels fouled the diagonal members of the chassis. Then, when my grease axle boxes arrived from 'MJT' (after 15 days and well within the 21 days maximum), I found that there was insufficient
I had intended to wait until my carriage truck was complete, before writing another post, but various events have introduced delays, so here is a 'work in progress' report. . Some of my readers seem to like my 'off-beat' approach to modelling and this one also has some unusual features!
It all began when I saw a box of 'extra long' safety matches on the supermarket shelves. I had been looking at a drawing of an early wooden-framed carriage truck (1866) in Janet Russell's book on 'Gre
In my very first post in this blog, I mentioned converting an old K's 14xx to a fair representation of a 517 class. Since the 517 was a very variable class, it's impossible to select a 'typical' version - they vary from the earliest tiny saddle tanks, with a short wheelbase, to the final re-builds, which were very similar to Collett's 14xx series. Nevertheless, there were significant differences between even the latest of these engines and the 14xx - most obviously in the cab but also the 14xx h
In a previous post: http://www.rmweb.co.uk/community/index.php?/blog/1405/entry-12531-milk-churns-and-siphons/
I mentioned that I had tried painting a GWR wagon with Farrow & Ball 'Rectory Red' paint.
To re-cap, this colour is described by the manufacturer as Vermilion mixed with Lead Oxide, to make it cheaper. It seems to me that could be a plausible formula for the red used during the 19th century on GWR wagons.
Because it is difficult to compare colours accura
Most of my entries in this blog, so far, have related to locomotives and rolling stock. For most of us , these are the key elements of a model railway and involve a lot of scratch or kit building, since very few pre-grouping (and especially pre-WW1) models are available as RTR.
Now, I am starting to think about scenery aspects and have realised that there is something of a paradox when 'turning back the clock'. We tend to think of 'older' as meaning 'quainter' and more 'weathered' wh
It was only when I looked at the photograph of "City of Truro", which I took yesterday, that I noticed that the nameplate was missing! About half of my track is in tunnel, so there was an evens chance that it had dropped off in the tunnel. Fortunately, I have a 'search and rescue' procedure.
Some time ago, I became interested in the idea of shooting video from the footplates of my model locomotive. I found that there was a miniature video camera, popular with aircraft RC enthusisats,
Although popular with several European manufacturers, tender-drive has never been well-regarded in UK, possibly because of some rather poor implementations back in the 20th century. Nevertheless, it does have some advantages, when modelling prototypes from the 19th century. Locomotives of that period were generally quite small, with open cabs, and most passenger classes used single drivers until quite late in the century. These characteristics create two problems for the modeller: there is littl
I've been reading the thread started recently by Robin2 on "Why have moving trains on layouts?" - ( http://www.rmweb.co.uk/community/index.php?/topic/78169-why-have-moving-trains-on-layouts/ )
There've been lots of interesting and thoughtful replies and it has made me think. On the one hand, I couldn't build an engine without wanting to make it work satisfactorily and, on the other, I don't run trains very much but do enjoy setting up various static scenes for photography. I do find
One of the things to remember when 'turning back the clock' is the former widespread use of horses, which continued up until WW2 and lingered even into the 1950s. I felt I needed to learn a bit more about how they were used, so that I could replace some of my more modern traffic with appropriate period vehicles. I found the book 'Great Western Horse Power' by Janet Russell, which proved to be a mine of information but seemed to concentrate on large depots and cities, whereas I was interested to
I have mentioned before that the attractions of the pre-grouping period include the elaborate and colourful liveries. These also, however, present a challenge to the modeller in achieving these effects on a small scale.
Many years ago, while recuperating from a bout of pneumonia, I built a rake of Ratio 4-wheelers. Looking at these now, I am somewhat amazed to see the patience with which I tackled their painting! 30 years later, natural 'weathering' has given them a 'used' appearance
I have mentioned before in this blog that my layout includes an 009 narrow-gauge section. Most of this section does not need changing in order to fit in with my revised 19th-century timeframe but, a long time ago (1980), I built a 'Centre Models' kit of a Leek & Manifold 2-6-4T, of which the prototypes appeared in 1904. Whilst not quite fitting my new era, it is a handsome locomotive that I had never got to run well, so I decided to re-build the chassis. A body kit is still available from Me
I visited the Swindon Railway Festival yesterday (15th Sep). It's always good to study prototype fittings, such as the sand boxes on the Dean Goods. In model form, these often show a 'draw' from the casting process, so it was useful to be reminded of the shape and details of the original.
Dean Goods no.2516 - Sand Box
There was also a sizeable model railway exhibition and I got talking on the Broad Gauge Society stand. I mentioned that I had recently photogra
