This post brings us up to date. 

We start off with a couple of pictures of most of the parts after separation and cleaning.

First are the body parts and the second are the frame parts. Doing this lets me see where I am and what else I need to do.

I made a couple of discs that fit onto the firebox sides in the frame cut outs.

Work then progressed onto the cab. The front spectacle plate had the vent holes drilled just under the roof line. I almost did to many, fortunately I checked the photos.

Cab rear had the same holes drilled, I need to check if I need to add the handrail under these. Then drill it's holes if needed. I also formed the shelf on this part.

The front bunker plate was cut to height next, all the detail on this is surface mounted.

Bunker rear was formed and cut to length.

Although cut out sometime ago I made up them up mainly to check the length.

Hopefully I'll be doing some more soon. But I'm busy painting and finishing models to bring to the UK.