RMweb Gold 46444 Posted April 1, 2021 RMweb Gold Share Posted April 1, 2021 18 minutes ago, wiggoforgold said: You probably used this one then. The destination blind says Ford and Keyham. Alex I think you could be right there Alex.. 1 Link to post Share on other sites More sharing options...
RMweb Premium Gedward Posted April 1, 2021 RMweb Premium Share Posted April 1, 2021 On 28/03/2021 at 12:42, wiggoforgold said: Thanks Rob. No more grass planned. I need to finish the hedgerow at the back, and there's a bit of rusty iron fence for the end of the loading platform, but I won't put that in place until I've finished the work at the back. Alex As most layouts are fixed to a wall and as obvious as this seems, I'm finding that the order of placing/building a layout is very important. A strict plan for what to work on first is really important. It's so easy to ruin something you've finished, whilst reaching over the top of it. Maybe we're not all as clumsy as me though. Link to post Share on other sites More sharing options...
RMweb Premium Gedward Posted April 1, 2021 RMweb Premium Share Posted April 1, 2021 AKA, chicken or egg or Who's on first? Link to post Share on other sites More sharing options...
RMweb Gold Oldddudders Posted April 1, 2021 RMweb Gold Share Posted April 1, 2021 22 minutes ago, Gedward said: As most layouts are fixed to a wall and as obvious as this seems, I'm finding that the order of placing/building a layout is very important. A strict plan for what to work on first is really important. It's so easy to ruin something you've finished, whilst reaching over the top of it. Maybe we're not all as clumsy as me though. Some of us are! A Winter's day, unheated railway barn, while reaching across layout necessarily thick jacket catches sleeve on loco which descends to the floor, breaking off cast buffer beam, or half of. It will never be the same again. 9 Link to post Share on other sites More sharing options...
RMweb Gold The Fatadder Posted April 1, 2021 RMweb Gold Share Posted April 1, 2021 2 hours ago, Gedward said: As most layouts are fixed to a wall and as obvious as this seems, I'm finding that the order of placing/building a layout is very important. A strict plan for what to work on first is really important. It's so easy to ruin something you've finished, whilst reaching over the top of it. Maybe we're not all as clumsy as me though. I made this mistake the other week, it was near to the end of an evening modelling and I was looking for small jobs to do. So addd a cross joist across the corner of the layout and extended a hill. Then remembered I hadn’t done the bank on the other side of the layout and now had an extra foot or so to reach 7 Link to post Share on other sites More sharing options...
wiggoforgold Posted April 1, 2021 Author Share Posted April 1, 2021 My basic approach is to start at the back and work forward. I'm lucky with Yelverton as it is designed to be portable. Part of the back drop comes off, ant the boards can be separated, so I can get at it from several angles. Plus, because it is in sections I can put two sections at a time in the table in the workshop to work on. Alex 2 Link to post Share on other sites More sharing options...
brianusa Posted April 1, 2021 Share Posted April 1, 2021 I look forward to see how Yelverton progresses each time. I'm not sure that bridge was suitable for vehicular traffic as I always understood it was just for pedestrian access. But that was ages ago! I believe the last visitors were from the CRS who had special permission to visit the remains of the station. Brian. 1 Link to post Share on other sites More sharing options...
Popular Post wiggoforgold Posted April 11, 2021 Author Popular Post Share Posted April 11, 2021 (edited) Rododendron, blue bells, brambles and a bit of fence to finish off the loading bay Alex Edited April 11, 2021 by wiggoforgold 28 11 Link to post Share on other sites More sharing options...
exmoordave Posted April 11, 2021 Share Posted April 11, 2021 Looks really good Alex! I shall look forward to seeing it 'in the flesh'!!! Stay safe & all the best. 1 1 1 Link to post Share on other sites More sharing options...
MrWolf Posted April 11, 2021 Share Posted April 11, 2021 Wonderfully well observed and recreated slice of nature. I'm looking forward to getting to this stage with my own model. Still cursing wires here! 1 2 1 Link to post Share on other sites More sharing options...
wiggoforgold Posted April 11, 2021 Author Share Posted April 11, 2021 (edited) 2 hours ago, MrWolf said: Wonderfully well observed and recreated slice of nature. I'm looking forward to getting to this stage with my own model. Still cursing wires here! Thanks. That's most kind. However, my wife looked at the bluebells this morning and commented that they were too pale. I went up the garden and inspected a clump. A photograph was taken for reference and recolouring operations should start this week. All this is displacement activity to put off reworking the Iights. Alex Edited April 11, 2021 by wiggoforgold 3 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted April 11, 2021 RMweb Gold Share Posted April 11, 2021 6 hours ago, wiggoforgold said: Rododendron, blue bells, brambles and a bit of fence to finish off the loading bay Alex Top stuff Alex. That would appear to set the time of year for the layout then. Rob. 2 Link to post Share on other sites More sharing options...
RMweb Gold 46444 Posted April 11, 2021 RMweb Gold Share Posted April 11, 2021 Top notch modelling Alex. A lovely scene captured perfectly. I used some Woodland Scenics blue flock on Wadenhoe Road for Bluebells. Cheers, Mark 3 1 Link to post Share on other sites More sharing options...
brianusa Posted April 11, 2021 Share Posted April 11, 2021 Alex, your latest changes to the hedgerows is beginning to look like the undergrowth and trees at the bottom of our garden, no bluebells though! Brian. 1 1 Link to post Share on other sites More sharing options...
wiggoforgold Posted April 11, 2021 Author Share Posted April 11, 2021 52 minutes ago, 46444 said: Top notch modelling Alex. A lovely scene captured perfectly. I used some Woodland Scenics blue flock on Wadenhoe Road for Bluebells. Cheers, Mark I shall have a look for some. I couldn't find any blue earlier! Alex 1 Link to post Share on other sites More sharing options...
wiggoforgold Posted April 11, 2021 Author Share Posted April 11, 2021 Well, I've put the boards up again. They come up and down quite regularly, which is good, as I'm getting the hang of how it all goes together. I took some pictures of the assembly process, I plan to describe arrangements for the lights and backscene, so it may be helpful to show the basic structure as it is all built off that, The scenic section is supported by a pair of plywood "L" girders, which fit on a pair of trestles. A bracket is bolted to the centre of the rear "L" girder. It has several functions: It reinforces the folding joint in the middle of the "L" girder; It provides a location for the centre scenic board: It carries the wiring for the lights over the layout; It supports the rear girder, which carries the lights and from which the sky backdrop is suspended: It supports the centre of the proscenium arch. A bracket is bolted to each end of the "L" girder to support the outer ends of the rear lighting beam There is a dowel in the centre bracket, which locates in a hole in the centre of the rear of the centre scenic board. Above that is an 8mmbolt, which holds the scenic board to the bracket. The locates the centre board firmly in place, and the outer scenic boards are attached to that. All tree scenic boards are about 3' long, and constructed from ply, so are very light and easily moved. As explained above, these support the backscene and lighting arrangements, and I'll post more pictures of these shortly. Alex 10 Link to post Share on other sites More sharing options...
Popular Post wiggoforgold Posted April 11, 2021 Author Popular Post Share Posted April 11, 2021 After I set the layout back up this afternoon, I took a few pictures of trains on the layout. First, a small pairie enters Yelverton with a short freight. An overall view of the layout, with the same train entering the station. The down platform buildings Alex 27 4 Link to post Share on other sites More sharing options...
bgman Posted April 12, 2021 Share Posted April 12, 2021 Nice bicycles too ! 3 Link to post Share on other sites More sharing options...
lmsforever Posted April 12, 2021 Share Posted April 12, 2021 This looks really good plenty of space and well modeld like that loading bay and the Cervello looks rather nice ,are you going for disc brakes ? I am glad we had Mafac in my day although I ended up with some really good Italian side pull ones .Keep up the modeling. 2 1 Link to post Share on other sites More sharing options...
exmoordave Posted April 12, 2021 Share Posted April 12, 2021 So much I like on here Alex - even down to the rusty railings on the end of the dock. Can I ask how you managed that effect? 1 3 1 Link to post Share on other sites More sharing options...
wiggoforgold Posted April 12, 2021 Author Share Posted April 12, 2021 10 hours ago, exmoordave said: So much I like on here Alex - even down to the rusty railings on the end of the dock. Can I ask how you managed that effect? Thank you Dave. The railings were made from Plastruct angle and rod. One leg was left longer than the others for painting. It was sprayed with various Mig rust shades, including medium rust and dark rust, followed by a wash of Mig matt black, heavily thinned with acrylic thinner. It was then given a spray of acrylic matt varnish, and weathering powders, mainly earth and red oxide, applied. Alex 2 2 Link to post Share on other sites More sharing options...
wiggoforgold Posted April 12, 2021 Author Share Posted April 12, 2021 11 hours ago, lmsforever said: This looks really good plenty of space and well modeld like that loading bay and the Cervello looks rather nice ,are you going for disc brakes ? I am glad we had Mafac in my day although I ended up with some really good Italian side pull ones .Keep up the modeling. I'd go for discs if I bought another. When I got it there wasn't a disc option. Now I think the frame is disc only. Alex 1 Link to post Share on other sites More sharing options...
MrWolf Posted April 12, 2021 Share Posted April 12, 2021 I wouldn't mind that Cervello cluttering up my garage either. I'm still running around on a circa 1978 Peugeot Clubman with a 23" frame. It's the proverbial woodsman's axe though. Deore deralliuers, running off the old frame mounted levers, double wall alloy rims, ovoid crank, cartridge bottom bracket, wider bars and 4" headstem, but still the old Weinmann brakes that are more than capable of locking up if you're not careful. I think that the disc option is a matter of personal taste, as a number of people I know who are involved in competitive cycling think that a front disc is too much for a lightweight race bike, having been launched over the handlebars by too heavy an application. 3 2 Link to post Share on other sites More sharing options...
wiggoforgold Posted April 14, 2021 Author Share Posted April 14, 2021 Like my earlier layouts, Diddington and Upwell Drove, Yelverton is conceived as a whole, framed by wings and a proscenium, with a full height backscene and self contained lighting. Lighting of the layout is by means of flexible LED strips, one at the front and one at the back of the layout. I'm using warm white LEDS: I tried ice white as it gave more light, but the result was too harsh. There are two drivers for the lights, one for the back and one for the front, fitted under the centre board. The wires for the lights run up the centre support At the top of the centre support is a socket for the leads to the LED strips The LED strips are fitted on the underside of the centre beam. The beam is ply, about 9' long, and folds in the middle for transportation. When folded out, it is bolted in place on top of the centre and end supports. Alex 11 5 Link to post Share on other sites More sharing options...
Popular Post wiggoforgold Posted April 18, 2021 Author Popular Post Share Posted April 18, 2021 More work on the disused Princetown platform road, and a first attempt at laurels. Thanks 46444 for the flock for the bluebells. I had another go at the wooden extension to the platform edge, as I wasn't happy with my first attempt The disused platform where the trains for Princetown once stood. Alex 17 11 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now