posneg6 Posted October 19, 2020 Share Posted October 19, 2020 I bought a new Rocco Wlan maus Black and I can not for the life of me change the language to English. HELP! I think I'm loosing my marbles with this one. I have the older Red Lockmaus but the black one has got me stumped. I'm in LOK 1 =wich is Loco 1 , I can get to menu 3 = settings or it say EINSTELLINGEN! I don't know what that means but it may be language! And then press OK and it says Display, press OK again and it says Helle press OK again and it says 4 I have no idea what I'm doing. Please help, I know I'm going to feel like an idiot,, Link to post Share on other sites More sharing options...
peterfgf Posted October 19, 2020 Share Posted October 19, 2020 Copy of instructions attached. It is logical but perhaps not intuitive (if that doesn't sound a contradiction). Use "OK" as "enter" to accept choices. Peterfgf Z21_10813_hand_controller_wlan_multimaus_(black).pdf Link to post Share on other sites More sharing options...
posneg6 Posted October 19, 2020 Author Share Posted October 19, 2020 Hi Thanks I already read the manual the problem is the previous owner used it once and skipped the first language settings so now it is in German and I can't read German. Link to post Share on other sites More sharing options...
eastwestdivide Posted October 19, 2020 Share Posted October 19, 2020 Einstellungen = settings, so try that and look for Sprache = language ? 1 Link to post Share on other sites More sharing options...
posneg6 Posted October 19, 2020 Author Share Posted October 19, 2020 OK I'm in Helli then I press OK and it says 4!press OK again it says Helli Link to post Share on other sites More sharing options...
eastwestdivide Posted October 19, 2020 Share Posted October 19, 2020 Helli might be Helligkeit/brightness. Sorry but I need to go right now. I’ll come back in a couple of hours and read that manual if you’ve not solved it in the meantime. 1 Link to post Share on other sites More sharing options...
posneg6 Posted October 19, 2020 Author Share Posted October 19, 2020 (edited) I may have to factory reset but agin I need it to be in Eng so I can navigate there! so frustrating. Edited October 19, 2020 by posneg6 So I can get to the settings menu and the first 4 options are about the display brightness contrast etc ets 4 options but I cant seem to get to the next menu which is USer interface and the first sub menu is language However I cant seem to get from the f Link to post Share on other sites More sharing options...
posneg6 Posted October 19, 2020 Author Share Posted October 19, 2020 WOW I did it I don't understand how but I got to Sprach. then ENG wooohooo . now to try and get my WIF info in there Link to post Share on other sites More sharing options...
posneg6 Posted October 19, 2020 Author Share Posted October 19, 2020 OK All sorted YEs I feel like an idiot but glad I got there Thanks eastwestdivide 1 Link to post Share on other sites More sharing options...
posneg6 Posted October 19, 2020 Author Share Posted October 19, 2020 (edited) New problem now I've configured the new Wlan maus I have lost all my locos in the app! I had 9 locos with photos all programmed in Now they are all gone! the app somehow must have rewset itself when I connected the new Wlan mouse! It's not easy this DCC lark and I've been using Rocco for over ten years . Edited October 19, 2020 by posneg6 Now I will have to reprogram all my Loco into the app again but how do I transfer them from the z21 app to the new WLAN maus? any ideas? Link to post Share on other sites More sharing options...
eastwestdivide Posted October 19, 2020 Share Posted October 19, 2020 Glad you got the language thing sorted. While I speak a bit of German, unfortunately I don't speak DCC! Good luck/viel Glück/101101101101101101111000110100100100011001010010* *Don't waste any time translating this mock-binary - it's just a random series of keypresses 1 Link to post Share on other sites More sharing options...
WIMorrison Posted October 19, 2020 Share Posted October 19, 2020 How do you transfer from Maus to app? You can’t. also the Maus cannot affect the App Library. That is 100% independent on each phone Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted October 19, 2020 RMweb Gold Share Posted October 19, 2020 (edited) As Iain says the app is separate you can transfer between mice but not between phone and maus, try rebooting the app by swiping it closed fully on the Home Screen as they should be there unless you, or a phone glitch, deleted them. It’s well worth creating an email export file and send to yourself once you’ve programmed everything so if the phone corrupts you can just reinstall from the email. Edited October 19, 2020 by PaulRhB 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now