Brian D Posted December 21, 2019 Author Share Posted December 21, 2019 It's that time of year again so... ...and all the very best for 2020. Regards, Brian. 12 7 Link to post Share on other sites More sharing options...
Brian D Posted December 24, 2019 Author Share Posted December 24, 2019 Final update before the Festivities. In the last few days I have replaced the temporary paper photo backscene with A4 card sheets, also printed with the back scene panorama. These are glued to the hardboard sheeting surrounding the fiddle yard. I've also extended the brick wall to fully enclose the colliery as below shown without the screens and conveyor... ...and with the screens and conveyor replaced. Still more ground cover to be added. Regards, Brian. 9 Link to post Share on other sites More sharing options...
Brian D Posted January 4, 2020 Author Share Posted January 4, 2020 I've added some more ground cover to the colliery area and made this video this afternoon which reflects all the changes to Deneside Colliery made in the last couple of months or so. So for your enjoyment or otherwise click here... Regards, Brian. 11 1 2 Link to post Share on other sites More sharing options...
RMweb Gold tom shaw Posted January 5, 2020 RMweb Gold Share Posted January 5, 2020 Love it Brian. Regards, Tom 1 1 Link to post Share on other sites More sharing options...
jukebox Posted January 5, 2020 Share Posted January 5, 2020 Excellent, Brian! 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted January 5, 2020 RMweb Premium Share Posted January 5, 2020 Now all it needs is a big dose of dirt...not everywhere and with a variety of colours but mainly..black Baz 3 2 Link to post Share on other sites More sharing options...
Sludger Posted January 5, 2020 Share Posted January 5, 2020 Inspiring. Trev. 1 1 Link to post Share on other sites More sharing options...
Toftwood Posted January 6, 2020 Share Posted January 6, 2020 Hi Brian, happy New Year to you and yours. Another freight stream you can introduce and complicate matters is something all collieries were in need of....Pit Props. Old minerals loaded with the same and stacked props waiting to go down would provide added realism??? watcha think? Pete 2 1 Link to post Share on other sites More sharing options...
Andrew P Posted January 6, 2020 Share Posted January 6, 2020 Looking excellent Brian, but yes now needs a little dirt to blend it all in. Superb modelling. 2 1 Link to post Share on other sites More sharing options...
Brian D Posted January 7, 2020 Author Share Posted January 7, 2020 22 hours ago, Toftwood said: Hi Brian, happy New Year to you and yours. Another freight stream you can introduce and complicate matters is something all collieries were in need of....Pit Props. Old minerals loaded with the same and stacked props waiting to go down would provide added realism??? watcha think? Pete Thanks Pete, and all the very best for 2020 to you too. That is a great suggestion about the pit prop loads. I'll give it some thought but siding space at the colliery is a bit tight - here's a reminder of my track plan. I do remember, I think (or did I see pictures), that when we returned to the North East by train from KX that, arriving in Hartlepool in the late 1950s, there were sidings full of wagons loaded with timber props in the harbour (now marina) area south of the station. Regards, Brian. 5 Link to post Share on other sites More sharing options...
Brian D Posted January 7, 2020 Author Share Posted January 7, 2020 The Deltic prototype has visited Deneside. I feel another video coming on Regards, Brian. 10 Link to post Share on other sites More sharing options...
AireValley1962 Posted January 7, 2020 Share Posted January 7, 2020 Oooh, THE Deltic. Nice! And Happy New Year, too, Brian. Will 2 Link to post Share on other sites More sharing options...
Toftwood Posted January 7, 2020 Share Posted January 7, 2020 1 hour ago, Brian D said: Thanks Pete, and all the very best for 2020 to you too. That is a great suggestion about the pit prop loads. I'll give it some thought but siding space at the colliery is a bit tight - here's a reminder of my track plan. I do remember, I think (or did I see pictures), that when we returned to the North East by train from KX that, arriving in Hartlepool in the late 1950s, there were sidings full of wagons loaded with timber props in the harbour (now marina) area south of the station. Regards, Brian. I did say 'complicate ' things lol. You could offload in your goods hard and then (swear words warning ) truck them by road???? Pete 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted January 8, 2020 RMweb Premium Share Posted January 8, 2020 Yes, I remember the mountains of pit props at West Hartlepool Docks, i never recall seeing any wagonloads going into Horden though. (Could these have travelled at night away from the main coal moving times?) You could just have a pile of props somewhere at the colliery. I used black current canes for the ones on Cwmafon. They smell nice too! Baz 2 1 Link to post Share on other sites More sharing options...
Two_sugars Posted January 8, 2020 Share Posted January 8, 2020 4 hours ago, Barry O said: Yes, I remember the mountains of pit props at West Hartlepool Docks, i never recall seeing any wagonloads going into Horden though. (Could these have travelled at night away from the main coal moving times?) You could just have a pile of props somewhere at the colliery. I used black current canes for the ones on Cwmafon. They smell nice too! Baz I agree, I seem to remember a timber importer on the docks. . also can't remember seeing wagonloads into Easington . . . But everybody in the Colliery seemed to have plenty of bundles of sticks to light their home fires . . off-cuts from the pit-props. John 2 1 Link to post Share on other sites More sharing options...
Brian D Posted January 9, 2020 Author Share Posted January 9, 2020 On 07/01/2020 at 18:56, AireValley1962 said: Oooh, THE Deltic. Nice! And Happy New Year, too, Brian. Will And the same to you Will. All the best, Brian. 1 Link to post Share on other sites More sharing options...
Brian D Posted January 9, 2020 Author Share Posted January 9, 2020 On 08/01/2020 at 07:01, Barry O said: Yes, I remember the mountains of pit props at West Hartlepool Docks, i never recall seeing any wagonloads going into Horden though. (Could these have travelled at night away from the main coal moving times?) You could just have a pile of props somewhere at the colliery. I used black current canes for the ones on Cwmafon. They smell nice too! Baz On 08/01/2020 at 11:25, Two_sugars said: I agree, I seem to remember a timber importer on the docks. . also can't remember seeing wagonloads into Easington . . . But everybody in the Colliery seemed to have plenty of bundles of sticks to light their home fires . . off-cuts from the pit-props. John Harking back to my own train spotting years at Easington, all I ever saw going in and out of the colliery sidings were coal hoppers, empty in, full out. I never saw any open wagons containing pit props. However, I'm beginning to think that timber pit props had become obsolete by that time (the end of the 1950s/early 60s) in favour of engineered steel hydraulic props. As I understand it, in the East Durham coal fields the coal seems were relatively thin and once the coal had been won, the props were removed and the roof or ceiling was allowed to collapse. The thin "empty" seems collapsing being anything up to 1200 feet or more below ground level caused I believe only isolated settlement/subsidence issues at ground level - I remember the odd road sign warning of subsidence. But at that time I believe the active coal face was far out under the sea. Regards, Brian. 1 2 Link to post Share on other sites More sharing options...
RMweb Premium Barry O Posted January 10, 2020 RMweb Premium Share Posted January 10, 2020 Brian Yes they started to use Dowty props. Some (in the 18" seam followed the cutter(so the roof could move). But they still osed the odd wooden prop when I visited the faces in Easington in July 1973. And there was still a big pile of props at Horden not dar from the coke mountain... Baz 1 1 Link to post Share on other sites More sharing options...
Brian D Posted January 12, 2020 Author Share Posted January 12, 2020 The Deltic video is complete and you can view it here... I used the cam truck for both the on track and line side clips so as to get a little closer to the action. Enjoy or othjerwise. Regards, Brian. 6 1 Link to post Share on other sites More sharing options...
Les1952 Posted January 12, 2020 Share Posted January 12, 2020 Loving it- You'll need to find a way of keeping brake vans out from under the screens. They and steam locos were nasty fiery things and at most pits they were worried about them setting fire to coal dust. Les 2 1 1 Link to post Share on other sites More sharing options...
Brian D Posted January 15, 2020 Author Share Posted January 15, 2020 I've just uploaded another video, this time featuring my "Streak" Andrew K McCosh. Find it here if you are interested. Regards, Brian. 7 Link to post Share on other sites More sharing options...
manna Posted January 15, 2020 Share Posted January 15, 2020 G'day Folks Underlined that one about 1962, maybe earlier..............lol manna 1 Link to post Share on other sites More sharing options...
Brian D Posted January 20, 2020 Author Share Posted January 20, 2020 Recent activity has centred on signal head construction for the gantry. However, the more that I looked at the gantry, the more dissatisfied I got with its appearance - it is just too chunky looking. Things have moved on a bit since this Airfix kit (bashed in this case) had its tools made so I have decided to replace it with one of these... ...again slightly kit bashed. I have replaced the kit supports with hollow fabricated plastic sections as below... ...to hide the signal head wires. The visible sections of wire within the Pratt truss will be sprayed matt black and the main structure sprayed matt grey to hopefully make the wires within invisible. The truss will be placed here and will carry four signal heads. Regards, Brian. 6 1 Link to post Share on other sites More sharing options...
Brian D Posted January 21, 2020 Author Share Posted January 21, 2020 A bit more structure was added today to support the decking and the whole thing has been sprayed with grey car primer from a rattle can. Obviously the "feet" need painting a different "concrete" colour. The final Train-Tech signal head arrived today so I need to assemble that, paint all the signal heads and fashion a "timber" deck from plastic strip before final assembly of the gantry and wiring up to an as yet unbuilt signal control panel. Getting there (slowly)! Regards, Brian. 5 1 Link to post Share on other sites More sharing options...
Brian D Posted January 23, 2020 Author Share Posted January 23, 2020 Further slow progress on the signal gantry has taken place. Using plastic strip and rod, the top "timber" deck has been assembled and painted. The square holes in the deck are for threading through the signal head wires. Speaking of which... ...the final Train-Tech signal head has had its wires soldered on and... ...the front and back plastic casing glued together around the LED head. All was tested after assembly to make sure no wires had come adrift. Final assembly now beckons. Regards, Brian. 6 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now