woko Posted February 8, 2020 Share Posted February 8, 2020 So I have started to make some progress on the model village, for my dads model railway, using all the buildings I designed and 3d printed, the drystone walls are also 3d printed in sections, and then set into the plaster. Usual technique of sculpted foam insulation, with plaster of paris on top, and used for the rock cuttings! The plaster has been primed, and is now ready for the paint, and static grasses/foliage bushes. I have placed some trees where I think they work best, but no doubt this will change as I go on! So there is brick Dairy that serves a siding, a pub, which will be the Henry Arms after my nephew, then a row of worker cottages going up the hill to the road bridge, and the foreground buildings are a small farm, and barn set. The buildings all need to be removable so lighting can be fixed inside them. So I have masked them off and plastered up to them to sit them in, I will hide any small gaps with grass, and bushes. I will hopefully post some more progress soon! 8 6 Link to post Share on other sites More sharing options...
RMweb Premium Kris Posted February 8, 2020 RMweb Premium Share Posted February 8, 2020 They look very effective. 1 Link to post Share on other sites More sharing options...
monkeysarefun Posted February 8, 2020 Share Posted February 8, 2020 You mentioned in your other thread that these were done on a Zortrax - is it the M300? Link to post Share on other sites More sharing options...
woko Posted February 8, 2020 Author Share Posted February 8, 2020 12 minutes ago, monkeysarefun said: You mentioned in your other thread that these were done on a Zortrax - is it the M300? Hello Monkeysarefun, no this is the M200 the first version, its quite a few years old now, I think at least 3yrs old, and im thinking of getting a new printer as I think the technology has moved on massively, especially with resin printers, but ideally im hoping Prusa bring out a larger printer this year, are you using the M300 then? Link to post Share on other sites More sharing options...
monkeysarefun Posted February 9, 2020 Share Posted February 9, 2020 3 hours ago, woko said: Hello Monkeysarefun, no this is the M200 the first version, its quite a few years old now, I think at least 3yrs old, and im thinking of getting a new printer as I think the technology has moved on massively, especially with resin printers, but ideally im hoping Prusa bring out a larger printer this year, are you using the M300 then? No, I've got a photon which is brilliant for details but the small print area means I'm looking for a decent FDM printer for larger wall sections etc. The M300 is a bit out of my price range though.. Link to post Share on other sites More sharing options...
woko Posted February 23, 2020 Author Share Posted February 23, 2020 Update on the progress of this little village, added in some static grass... some home made wire trees, and shrubs, 3d printed some gates, and telegraph poles, next up is a bit more balancing of the foliage, as I'm not completely satisfied yet, sorting the road and then followed by adding people, and life to the scene, and any small details. 11 6 Link to post Share on other sites More sharing options...
woko Posted March 1, 2020 Author Share Posted March 1, 2020 Finally finished this up now, well this section, I could add telegraph wires to the poles, i may still do, its hard to stop detailing, as thats the most fun I find! I have also included a picture with the buildings removed as my dad wants to add lighting to the inside of these buildings! I think the trickiest thing was getting the damn chickens to stand up! And the Hare if you can spot that 7 8 Link to post Share on other sites More sharing options...
BernardTPM Posted March 1, 2020 Share Posted March 1, 2020 Beautiful. 1 Link to post Share on other sites More sharing options...
woko Posted March 2, 2020 Author Share Posted March 2, 2020 On 01/03/2020 at 14:25, BernardTPM said: Beautiful. Thanks Bernard Link to post Share on other sites More sharing options...
RMweb Gold ianLMS Posted March 3, 2020 RMweb Gold Share Posted March 3, 2020 Stunning - exceptional modelling and great attention to detail. Really nice work there! 1 Link to post Share on other sites More sharing options...
RMweb Gold scottystitch Posted March 3, 2020 RMweb Gold Share Posted March 3, 2020 Wow! Fantastic, and very realistic. Well done and thanks for sharing! Best Scott 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now