RMweb Gold The Stationmaster Posted January 23, 2022 RMweb Gold Share Posted January 23, 2022 1 hour ago, Andy Hayter said: Do we really expect this to be played out step by step in public? Things will happen (probably have already started) in the background and the best we are likely to get are hints when a model is quietly dropped. Watching Hornby's share price might also be a sign of anything getting out to a wider audience although as usual it is following its yo-yo like decline after the annual announcement. But there was one rather odd looking change last week when there was a noticeable drop in the price on a day of relatively limited dealing but that might well have been someone profit taking after the announcement time peak. However I'm sure we'll not be hearing any sort of public announcement for some time yet - if ever 1 2 Link to comment Share on other sites More sharing options...
mdvle Posted January 23, 2022 Share Posted January 23, 2022 On 22/01/2022 at 15:33, StuAllen said: Anyone else notice the full page Rapido advert for Titfield Thunderbolt in this months Model Rail? Very colourful, styled like a movie poster - not subtle. Also in the news section there’s a couple of lines for the Hornby version but nearly 3/4 page for the Rapido one a couple of pages later. Remember that any magazines showing up now were complete a month or 2 ago given the lead times for publishing and so none of their coverage in print will reflect the fun of Hornby's official announcement day for a while yet. 1 3 Link to comment Share on other sites More sharing options...
RMweb Gold PaulRhB Posted January 24, 2022 RMweb Gold Share Posted January 24, 2022 (edited) First you can’t be prosecuted or fined for reporting news and if Hornby pay for an advert it’s their problem not the magazines who publish it. Rapido will have passed it to Studiocanal and won’t get updates unless there’s something significant to report. They won’t comment as it could be looked at as interference and influencing witnesses if it were to progress beyond cease and desist. So we won’t get hourly, daily or weekly updates for the internet black hole of demand and we will only learn what the result is once an official announcement of the next step is made. When that is depends on whether Hornby decides to fight it. It could be weeks or months. Edited January 24, 2022 by PaulRhB 2 6 Link to comment Share on other sites More sharing options...
RMweb Gold SHMD Posted January 24, 2022 RMweb Gold Share Posted January 24, 2022 If Hornby "decides to fight it" then they will do nothing for as long as possible. Kev. 1 1 Link to comment Share on other sites More sharing options...
RMweb Gold PaulRhB Posted January 24, 2022 RMweb Gold Share Posted January 24, 2022 (edited) On 19/01/2022 at 10:19, PaulRhB said: The Oxford one does nicely if you remove the canopy and repaint the flywheel and treads. Oxford Product Code: 76APR001 prompted by this I started repainting the bits on mine ready for a bit of weathering. Edited January 24, 2022 by PaulRhB 10 1 Link to comment Share on other sites More sharing options...
RMweb Gold Ian Hargrave Posted January 24, 2022 RMweb Gold Share Posted January 24, 2022 2 hours ago, SHMD said: If Hornby "decides to fight it" then they will do nothing for as long as possible. Kev. This won’t reach that level. No one needs …or can afford…..such as this to get into the hands of lawyers to bring it before public scrutiny.They will be working behind the scenes and out of sight . Hopefully,show's over folks. Link to comment Share on other sites More sharing options...
Titan Posted January 24, 2022 Share Posted January 24, 2022 2 hours ago, SHMD said: If Hornby "decides to fight it" then they will do nothing for as long as possible. Kev. Well with the 70th anniversary coming up fast, the deadline for doing nothing has already passed... 2 1 Link to comment Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted January 24, 2022 RMweb Gold Share Posted January 24, 2022 1 hour ago, PaulRhB said: prompted by this I started repainting the bits on mine ready for a bit of weathering. Very nice Paul - a number of pics of it can be found here - https://www.steamscenes.org.uk/engines/aveling-porter/road-roller/5590/pictures/ 1 Link to comment Share on other sites More sharing options...
Philip Jackson Posted January 24, 2022 Share Posted January 24, 2022 5 hours ago, PaulRhB said: prompted by this I started repainting the bits on mine ready for a bit of weathering. Nice. Where can I get a 1:76 scale Sid James? 1 Link to comment Share on other sites More sharing options...
RMweb Premium boxbrownie Posted January 24, 2022 RMweb Premium Share Posted January 24, 2022 5 hours ago, PaulRhB said: prompted by this I started repainting the bits on mine ready for a bit of weathering. I see a run on Oxford Steam Rollers 1 Link to comment Share on other sites More sharing options...
Popular Post Phil Parker Posted January 24, 2022 Popular Post Share Posted January 24, 2022 23 minutes ago, Philip Jackson said: Nice. Where can I get a 1:76 scale Sid James? For my model of the famous scene, I used an Airfix Africa Corps figure as the clothes were almost identical. 17 2 4 1 Link to comment Share on other sites More sharing options...
RMweb Premium boxbrownie Posted January 24, 2022 RMweb Premium Share Posted January 24, 2022 On 19/01/2022 at 10:19, PaulRhB said: The Oxford one does nicely if you remove the canopy and repaint the flywheel and treads. Oxford Product Code: 76APR001 Well, that’s either really badly parked or……run away roller 1 Link to comment Share on other sites More sharing options...
didcot Posted January 24, 2022 Share Posted January 24, 2022 The Oxford Diecast Aveling is a piston valve model, whilst the real thing is a slide valve engine. I'm not aware of any models be they die-cast or white metal that are of the slide valve version. 1 Link to comment Share on other sites More sharing options...
SamThomas Posted January 25, 2022 Share Posted January 25, 2022 14 hours ago, didcot said: The Oxford Diecast Aveling is a piston valve model, whilst the real thing is a slide valve engine. I'm not aware of any models be they die-cast or white metal that are of the slide valve version. details, details, details............... 5 Link to comment Share on other sites More sharing options...
RMweb Gold PaulRhB Posted January 25, 2022 RMweb Gold Share Posted January 25, 2022 17 hours ago, didcot said: The Oxford Diecast Aveling is a piston valve model, whilst the real thing is a slide valve engine. I'm not aware of any models be they die-cast or white metal that are of the slide valve version. Ok I hadn’t noticed a difference to the pictures of the one in the film but I wasn’t really looking at the motion so what needs altering to make it a slide valve version? Link to comment Share on other sites More sharing options...
peach james Posted January 25, 2022 Share Posted January 25, 2022 31 minutes ago, PaulRhB said: Ok I hadn’t noticed a difference to the pictures of the one in the film but I wasn’t really looking at the motion so what needs altering to make it a slide valve version? 1: change the cylinder block. 2: add a generator 3: call it a showmans. Oh, wait...no, that's something ELSE that's likely to start a flame war ! Different cylinder block, different arrangement of valve gear. On a 4mm scale model, mostly just altering the cylinder block, make it more "square" on the LHS, rather than rounded, knock the cover off the front to make it square too. I would suggest thinning the rear tyres down too...they look stupid thick to my eyes. If you are going all out, the distance between the cylinder block and the chimney appears a bit big too- as well as the cylinder block being offset too far (the exhaust on the real one is straight into the chimney, not offset- I don't know enough to know, but would make an assumption that is because the engine blocks porting on the piston valve engine is offset to the outside, and to the inside on the slide valve version. (the internal porting _is_ different, as 99% of piston valves are inside admission, vice outside admission for slide valves...) 2 2 Link to comment Share on other sites More sharing options...
didcot Posted January 25, 2022 Share Posted January 25, 2022 As has already been explained its the cylinder block in the main. The Aveling that was in the film was a slide valve, so the left hand side of the cylinder block, which is the valve chest, is flat and has a big oval makers plate on it. The piston valved Oxford model has a round bulge on the side to accommodate the piston valve. It also looks like the original has its cylinder block bolted directly to the boiler, so the bottom of the cylinder block would be round and drilled to suit the boiler. The Oxford offering is a later version. The bottom of the cylinder block is flat and there is a steel pressing that sits and is riveted on top of the boiler barrel to which the cylinder block is bolted. I suspect it was an attempt by Aveling to standardise the boiler and allow for compound or piston valve blocks. From a motion point of view there wouldn't have been a great deal of difference. The drain taps on the original are of the push pull variety, whilst the later Avelings had 1/2 turn ones, which tend not to jam as much. If fact I made a set from scratch when I owned an Aveling. The rim thickness looks OK to me on the model, mine were over 2" thick! But they could do with toning down. The scarifier looks to be about right. Some of the piston valve Avelings were very bad steamers and I got caught out by one many years ago. Couldn't get over 50 psi. Aveling actually reverted back to the slide valves in or around 1930. 4 1 Link to comment Share on other sites More sharing options...
didcot Posted January 25, 2022 Share Posted January 25, 2022 (edited) Duplicate post deleted Edited January 25, 2022 by didcot Link to comment Share on other sites More sharing options...
RMweb Gold PaulRhB Posted January 25, 2022 RMweb Gold Share Posted January 25, 2022 Well I wouldn’t have noticed but thank you chaps. It’s still the closest to a rtp model though but that will be useful on the 7mm one I have a kit for. 2 Link to comment Share on other sites More sharing options...
RMweb Premium boxbrownie Posted January 25, 2022 RMweb Premium Share Posted January 25, 2022 I’m just going to repaint mine and stick Sid on it……… Link to comment Share on other sites More sharing options...
peach james Posted January 25, 2022 Share Posted January 25, 2022 2 hours ago, didcot said: Some of the piston valve Avelings were very bad steamers and I got caught out by one many years ago. Couldn't get over 50 psi. Aveling actually reverted back to the slide valves in or around 1930. You should have tried an Armstrong-Whitworth ! Dad, I think, is still in love with Big Johnny, the Fowler that LJB had. (FF 4912). Not as much as HIS tractor though, 7529 3 Link to comment Share on other sites More sharing options...
didcot Posted January 25, 2022 Share Posted January 25, 2022 1 hour ago, peach james said: You should have tried an Armstrong-Whitworth ! I had heard that, but never seen one in the flesh. Link to comment Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted January 26, 2022 RMweb Gold Share Posted January 26, 2022 7 hours ago, PaulRhB said: Well I wouldn’t have noticed but thank you chaps. It’s still the closest to a rtp model though but that will be useful on the 7mm one I have a kit for. Paul if you look at the link I posted there are some reasonably clear pictures of the cylinder block on there (they all enlarge a bit when you click on them). Link to comment Share on other sites More sharing options...
RMweb Gold PaulRhB Posted January 26, 2022 RMweb Gold Share Posted January 26, 2022 7 hours ago, The Stationmaster said: Paul if you look at the link I posted there are some reasonably clear pictures of the cylinder block on there (they all enlarge a bit when you click on them). Thanks, I’d downloaded several of the real roller as the film angles are a bit restricted and it’s obvious when you’re looking for it but overall it’s not a stand out feature unless you do so I’d not clocked it before. Always interesting to learn the little detail differences. 2 Link to comment Share on other sites More sharing options...
MarkC Posted January 26, 2022 Share Posted January 26, 2022 On 24/01/2022 at 19:18, Phil Parker said: For my model of the famous scene, I used an Airfix Africa Corps figure as the clothes were almost identical. A duel! How very delightful! 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now