arff999 Posted November 11, 2012 Author Share Posted November 11, 2012 Hi Spent the evening programing lots of routes on my Big Bear DCC pc control program rather pleased with the outcome, I was going to use RR and Co but as i decided i only need it for route setting and turn out control it was a better option works basically the same but far easier. go have a look see what you think its free to try no connection with them just a statisfied user http://www.bigbearrail.com/ JOHN Link to comment Share on other sites More sharing options...
marsa69 Posted November 12, 2012 Share Posted November 12, 2012 I hope it's idiot proof as I need to use it Link to comment Share on other sites More sharing options...
Andrew P Posted November 12, 2012 Share Posted November 12, 2012 That looks complicated, I only have 3 points on my Trebudoc with just 2 switches, DONT THINK I WILL BOTHER, All the best and good luck Andy. Link to comment Share on other sites More sharing options...
arff999 Posted November 12, 2012 Author Share Posted November 12, 2012 Easy All you gotta do is push the button for the route you want even you can manage that i`ve done all the hard work JOHN Link to comment Share on other sites More sharing options...
arff999 Posted November 12, 2012 Author Share Posted November 12, 2012 HI A couple of pictures of the new covered footbridge to the high street end off the layout i was not sure about the first effort it was ok but proved a little difficult to get windows to fit so i made this one from a few metcalffe kits and some off the bits from the old bridge also some ratio sheets, i think it looks a lot better. take a lok and see what you think. A few things happening tomorrow get some people from the local uni comming to see the layout and to do a article about building model railways,take some pictures should be fun. Also got to get some more its to do some work on the final basebord turn outs JOHN 10 Link to comment Share on other sites More sharing options...
marsa69 Posted November 13, 2012 Share Posted November 13, 2012 Nice bridge mate, that's a big improvement Link to comment Share on other sites More sharing options...
arff999 Posted November 13, 2012 Author Share Posted November 13, 2012 Yea def looks a whole lot better than the last effort also done some more work ion the stables roof JOHN. Link to comment Share on other sites More sharing options...
marsa69 Posted December 8, 2012 Share Posted December 8, 2012 Starting to look into modelling the platform furniture and concentrating things at the High Street end whilst waiting for the tortoise motors to complete the Pelham Bridge end. It's turning out to be a difficult search in finding shots looking south down High Street from the level crossing. We could also do with a recommendation for any kits out there to represent BR station lamp posts. Any ideas anyone? Link to comment Share on other sites More sharing options...
arff999 Posted December 28, 2012 Author Share Posted December 28, 2012 Hi Been at work most of christmas and had an idea a while ago to re do my control panel as it looked a little bit amaturish and some people were finding it hard to understand as a lot of the switches were close together. So a week or so before christmas i started to plan a new one that i hope will be a lot easier to work (adam lol)(wont be able to shout at him then) also some thing that looks good i think what i have now is rather smart hope you agree. comments please These first pictures show the front side and the later ones the rear wiring just a few more led`s to connect but it all works ok so far. 2 Link to comment Share on other sites More sharing options...
packetlos Posted December 28, 2012 Share Posted December 28, 2012 Neat work with the mini panels, I plan to do something similar with STM30's for loconet. Link to comment Share on other sites More sharing options...
arff999 Posted December 28, 2012 Author Share Posted December 28, 2012 Neat work with the mini panels, I plan to do something similar with STM30's for loconet. Hi Packetlos There a pretty good bit of kit but as far as i know they ony work with NCE systems, i use them for all my route setting and also functions switching So far all have performed perfect i get 15 turn out`s controlled from one Minipanel. Thanks for looking JOHN Link to comment Share on other sites More sharing options...
steadtheimp Posted December 31, 2012 Share Posted December 31, 2012 This layout is going to be the best one I've seen and so far the only one I've seen of Lincoln Central I'm planing my own layout which I'm going to be basing it on Lincoln St Marks but with a twist its going to have 2 bay platforms were the turntable used to be which is now where the Argos loading by is but I'm going to be using the metcalfe mainline station instead of trying to find the scale drawings for the station buildings i also have my own YouTube channel if anyone wants to have a look its MadonTrains83. Bye for now Adam Link to comment Share on other sites More sharing options...
billyb_imp Posted December 31, 2012 Share Posted December 31, 2012 The panel board looks great with some very neat wiring Link to comment Share on other sites More sharing options...
arff999 Posted January 4, 2013 Author Share Posted January 4, 2013 Hi Billyb Thanks for that, took me a while to complete, all tested out ok just need to get the new box sorted out then put it all back together again, i need to get it done pretty soon as we have a test day looming. But if all else fails i can still use the pc to control the turn outs JOHN Link to comment Share on other sites More sharing options...
marsa69 Posted January 4, 2013 Share Posted January 4, 2013 Go on. Admit it John, you've dumbed it down not just for Adam but for me as well lol Link to comment Share on other sites More sharing options...
iploffy Posted January 4, 2013 Share Posted January 4, 2013 Oy have you done those earth bonds yet Link to comment Share on other sites More sharing options...
Wherry Lines Posted January 4, 2013 Share Posted January 4, 2013 You've made super progress John. The more you do, the more I want to build my modern interpretation of the location. Then I realise I don't really have the space! I really look foward to further updates and seeing the finished article. Link to comment Share on other sites More sharing options...
arff999 Posted January 4, 2013 Author Share Posted January 4, 2013 lol ian what earth bonds Link to comment Share on other sites More sharing options...
marsa69 Posted January 4, 2013 Share Posted January 4, 2013 He's talking to me John is Ze Colonel! Link to comment Share on other sites More sharing options...
arff999 Posted January 6, 2013 Author Share Posted January 6, 2013 Oh Ok that must be blue talk then No wonder i dont understand Link to comment Share on other sites More sharing options...
arff999 Posted January 7, 2013 Author Share Posted January 7, 2013 New loading ramp to allow cattle trucks to unload in to cattle pens now purchased just needs fitting and the side fencing sorting out. Also the last but one back scene is now fitted need to sort out last back board on the Pelham Bridge base board then it can also be fitted, fence for the cattle dock and coal merchant area now bought as i want to put a row of high trees and some low bracken type hedging along the back behind it hopefully this will blend the back scene sky and the trees together (i hope). Looking forward to getting one fo the smaller station buildings once finished then i can be planted but a lot of the buildings will be removable as the cross joins the main building is abouut 1.6 mtrs long when complete. All the station buildings are being consrtucted by some one else as i dont have the req skill level to do this but more on these later when i have spoke to the gent concerned, as he may want to post something in his own right. A bit more work has been done on the box for the new panel, drawings have been done and trasfered to Cad as we speak, then off to the laser cutters, hopefully the price wont be to great and also wont take long to cut out and weld up, Then i have to refit all the other bits back in to it and get it to work, should be fun, But as i posted before if i dont get it before the looming running/test weekend ill have to cobble together the old bits and reconect them or if all else fails ill just use the Big Bear DCC program i have. Thats about all for now have a look at the rest of the thread if your new, also any questions please ask away ill try to answer them. JOHN. Link to comment Share on other sites More sharing options...
Matty1971 Posted January 18, 2013 Share Posted January 18, 2013 Hello to all railway modellers, just finished reading all 8 pages and studying the pictures of the Lincoln central station very impressed. I have been looking for st marks station plans pictures etc but cannot find a thing but then again I am new all the best matt Link to comment Share on other sites More sharing options...
arff999 Posted January 19, 2013 Author Share Posted January 19, 2013 what you looking for matty Link to comment Share on other sites More sharing options...
hybridangel77 Posted January 19, 2013 Share Posted January 19, 2013 hi what did you make the footbridges from.is it lots of wills kits put together? terry Link to comment Share on other sites More sharing options...
Matty1971 Posted January 19, 2013 Share Posted January 19, 2013 Hi I was looking for track plans of st marks where points go was there a fish dock, cattle dock Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now