Jump to content
Users will currently see a stripped down version of the site until an advertising issue is fixed. If you are seeing any suspect adverts please go to the bottom of the page and click on Themes and select IPS Default. ×
RMweb
 

MikeHemmings

Members
  • Posts

    507
  • Joined

  • Last visited

Everything posted by MikeHemmings

  1. How about something on the line of level crossing gates were in one position blocks the tracks in the other position stops the door section being removed, when the door section is removed it isolates the supply to the gates. Mike
  2. I can't remember if this has already been asked, when the door section of track is removed is there a device to stop the trains falling of the end. Mike
  3. When I get cuts or splits I usually wrap some PVC electrical tape over the cut for 2 or 3 days this stops the skin drying out and adds healing. Mike
  4. Some pics of my Towcester junction layout, still a bit more work to do.
  5. Sorry to hear about your little accident that's going to be sore for a few days. Mike
  6. Yes I think he's been kidnapped but not by the GWR mafia. Mike
  7. I know a solicitor who left a phone charger on at work, needed new office. Mike
  8. Definition of living area, is the space you spend most time in. Mike
  9. What is happening to the loose cables dropping down to the sockets, are you fitting some plastic trunking after you have painted the walls. Mike
  10. Wording for the coal wagons.I have looked at water slide transfers stensel nun are the right size, the water slides have not got enough letters and are expensive. Does anyone have any other suggestion. Mike
  11. I am building a set of three private owners coal wagons for Williams of Towcester, When completed they should look like this,
  12. I have started to convert the ratio kits into push pull coaches a few pics to show progress so far,
  13. I was at the spam estate yesterday discussing a future project, there was a small white package arrived. Mike
  14. The discussion on the thermodynamics has been very interesting as this came into my line of work as an electrical engineer. Mike.
  15. I don't think spams will miss any holes, he still has a large bag full. Mike
  16. I think using the ply you will be able to remove a sheet if you ever need access under the floor, using the chip board you would have to cut the T&G off to remove it loosing the joint support. Mike.
  17. It does if the holes drilled in the sheet don't line up with the joists. Mike
  18. Is that Mr Beeching, will I add this line to the close list. Mike
  19. I can visualise imperial measurements but not metric measurements, they have no fiscal meaning. Mike
×
×
  • Create New...