PjKing1

10 minutes ago, 97406 said:

Good to see you're exercising those modelling fingers again. What sideframes are those? The orange jumpers look a lot better than the comedy Bachmann ones!

I was just about to hit the 'Submit' button when I spotted the Heljan box. Darn it! 😄

Morning buddy, it’s Bachmann’s big brother, as I was about to replace the written off D326 a 7mm version became available at a price not much dearer than its little brothers/sisters so I couldn’t refuse.  I’ve still got quite a bit of 7mm track building bits and bobs and I’ve got a plan, I’ve also got the boards and a lot of the sleepers are down to be honest 🙄 I’m still carrying on with my 4mm project but I just needed something different as mojo had been lost after last months events.  Also I’ve not started a thread etc as that would prob take me into double figured for unfinished projects but here’s a teaser 😉

Paul

15 minutes ago, sb67 said:

Looking forward to seeing the class 40 weathered, love the texture you've got on the bogies. 👍

Thanks very much, I’m using my tried and trusted method of powders brushed on to wet paint but I’ve tried somthing new for the oil spills etc.

Paul

I’ve been weathering today first the first time in quite some time, I’ll be posting the progress on my good old weathering thread

Paul

I’m finally back weathering, first layers of grime on a cl40’s bogie sides

Paul

57 minutes ago, 97406 said:

It’s rough at first but it will get better. Just think of all those locomotive-sized boxes that you will no longer have to ‘smuggle through customs’!

 

Oh I know it will it’s just hard at first, although the layout is intact, as I was leaving the other day D326 and a split box Peak hurtled down the stairs towards me, no idea were they are now all I’ve seen whilst seeing my daughter is a set of bogies and frost grills, no trace of bodies and there’s a sorry looking 20 to 😡

Paul

Thanks everyone, no idea what the future will bring at the moment but I love my modelling and I will finish this.

Paul

On 06/08/2023 at 18:04, 97406 said:

Fascinating stuff to watch develop! Looking good so far.

Thanks very much there might be a bit of a delay with progress though as swmbo didn’t take to kindly to not being obeyed, as things stand myself and ELJ need to relocate 😕

Afternoon Folks I do use the jig but then I tend to tweak what I’ve done and wing most vee’s, but I have made vee’s in the past without the jig.  It’s the same for the point blades I tevd to just file them down on a piece of old wood.

Also thanks for the info Martin.

Paul

First four 60’ track sections fixed into position

I’ve also been looking at yard lamps then remembered I had these from my O gauge ventures, so I’ll remove the 7mm detail I added and rescale it all to 4mm

Paul

More chairs threaded today rail heads cut at 60’ sections and cosmetic fishplates added, hopefully I can get these two sections of rail fixed into position soon.

Paul

First metre of rail has had chairs threaded today so if I can get all those done over the few days than it’s shouldn’t take long to get most of the track down.

Paul 

Frames made today, it’s been years since I made frames!  But now these are done I can crack on properly, also started threading chairs the other night.

Paul

Only an hour but feels like the most productive day in long time, Templot glued into position and a few more sleepers glued down.

D326 in the headshunt

where the two AL5’s are will be another siding, this will be rusting over and overgrown towards the end of it but it will have OLE 

I know I should be concentrating on the junction board at the moment but this section will allow my to have a little play as it’s all self contained, the main reason behind this decision being I’ve a few Accurascale on order and I want to play with them 😂

Paul

Well after what seems like weeks I’ve finally got a few days off, so grabbed some time before and started gluing sleepers down.  This will be part of the board that leads to the junction.  But it can also be used as a stand alone mini layout so to speak, this has been the idea since the start as it will give me a chance to show off the fleet and have a little shunt around measuring only 6’x1’.  This section of Edge Lane Junction will me know as Edge Lane Holding sidings with two lines stabling locos, a head shunt and possibly a third siding (not yet on the Templot) which will be overgrown and rusty as it approaches the buffers and the scenic break will be Edge Lane Drive road bridge which is to the far left of the photo below.

Sleepers starting to go down on the headshunt, I’ve not glued second siding down on the Templot yet though

view looking from Edge Lane Drive

view looking from Edge lane Junction towards Edge Lane Drive

Paul

Just caught up I hadn’t realised it was 3mm either, very interesting.

Paul

With the track plans set in stone for the original two boards for quite some time, I’ve always been thinking of what to do for the approach to Edge Lane if I ever wished to extend it.  This is something I’ve thought about since I originally started building ELJ in OO gauge all those years ago and today I finally decided on that track plan.  Not being one for compromise or compression and wanting my modelling to be as prototypical as possible (probably why none of my depot layouts have ever been completed) I think what I have planned will work quite well, and although the up and down lines won’t change from the original I have added a little to it to add a bit of play value which will also be useful for taking photos of locos etc.

All a long way off but I pleasing moment fi myself nevertheless ☺️

Paul

Having been told the modelling room is not really a modelling room it’s the spare room and it’s a sh!*hole by the mrs/boss I thought it was time to have a tidy and I must admit I quite enjoyed sorting all the chairs out into a storage box

I also took the opportunity of some ‘tidying time’ to see how the bridge looks in position with D326 passing.

Paul

I know I’ve asked this early on in the thread but don’t think I had any reply, are these 66’s EM and P4 friendly?

Paul

Cheers mate but don’t be to critical of yourself this is some seriously good modelling, love the photo with the 20’s keep the pics coming!!

Thanks again

Paul 

20 minutes ago, Phil Bullock said:

Having a Marvin the Android moment here this evening…

 

Here I am threading 280 bullhead chairs on to rail ….. 😀

 

 

Definitely one for @Enterprisingwestern and @PjKing1  …. ! 

Are you rebuilding everything with handbuilt track or are changing gauge 🤭

You do know that once you start building your own you’ll become hooked and won’t look back 😉

Paul

Looks great 😊 

Paul

As much as I love the hot weather it’s been to hot to get motivated to do anything on the track work but I did do a bit on the bridge.  I’ve started weathering the road and pavements and I’ve also loosely added the streetlights just to see how they will look.

Paul

The other day I attached the brickwork to the rise surface but apart from that I’ve don’t done anything else apart from taking some photos of the obligatory bus plonked on the bridge, Mr Bullock will be impressed 😏😌

Paul

On 14/06/2023 at 13:47, dj_crisp said:

Looking good!

 

I'll be interested in your thoughts on the EM wheels as they could be useful for other projects (assuming they have 2mm axle diameters)

 

Cheers

Will

That’s what I was thinking, it would be interesting to she what they could be used on.  Heljan are pretty easy to re-gauge but Bachmann need a bit of alteration to

the bogies normally especially the 20’s and 47’s etc 40’s seem ok though.

Paul

4 hours ago, sulzer71 said:

There was some of those in my parcel yesterday too , just a shame the EM layout won't be getting built for some time to come 

Nice little goodie bag there mate 😉

Paul