Nortonville Phil

Dava, Yes the KMM kit would need a proper three axle chassis built. Perhaps a piece of C section channel would be a starting point. Or perhaps an Atlas Plymouth chassis could be made to work. Also one might scratch build the body for one of these from plasticard. Most surfaces look to be flat..One could even cut a representation of the bogie side frames from card as well. I look forward to hearing more of your plans. Phil

Maybe look for a pair of the diecast metal side frames from the 1970s 80s’ Lionel SD40. You might turn up a set on EBay or put in a “Want add” for a pair on the US O Gauge Railroading forum. P. Randall

This guy on EBay makes a coarse O kit for a Republic Locomotive Works loco. it is very similar and was also built on an SD truck( bogie). https://www.ebay.com/itm/115950155585?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Q0q5x321Rpm&sssrc=4429486&ssuid=cxSaBtx8R5G&var=&widget_ver=artemis&media=COPY His kit is made to fit on the Beep chassis. One of my club mates here in Dallas is building a McKeen motor car at the moment from one of the bodies produced by this same seller. Much body smoothing was needed. P. Randall Dallas Texas

Here is a similar short K-Line brand tank car project I started a couple years ago. I need to get it out and make some more progress with the project.

Yes the Birney cars are a favorite of mine. I have several of the Corgis with two of them powered. On one I used the Brill 89e truck from Q- Car. This car is in the Chicago Surface Lines paint scheme like the one in the photo in the first post in this thread. I have a Philadelphia car by Corgi which I purchased second hand with a Pennsylvania Heritage Models( no longer in business) motorized truck. The main currently available option for powering these models is the Q- Car drive. Another possible option is the 3 rail K line/ Lionel/ Bachman Williams speeder (platelayers trolley chassis). It is very close in wheelbase. Wheels can be replaced with scale profile wheels. One axle is powered on this chassis. Phil Randall Texas

Hi, https://flic.kr/p/2fk4gVy Take a look at this photo. There is a PCC car on the right side numbered 1001. My club mate bought it off eBay. I thought it might represent a Brussels car because of the color. It is an O scale model and has doors at both ends. I thought I had a better photo but this is all I have for now. What do you think? P. Randall

Thanks to all for providing direction to me on this project. I will look into getting the parts I need from the Trust. Phil

Recently I purchased this coach off EBay. It is missing a bogie. I was wondering if someone might point me in the direction of where I might find a spare bogie. I am in the US. Or perhaps a pair of similar type bogies with finescale wheels could be purchased. I just am not familiar with who the suppliers are for this type of item. Thanks for any assistance. Phil Randall

Enderlin? Don’t you mean Currie MN. You would need a turntable for that one though. My FIL comes from that area.

My friend Tom is seeking advice on S drivers that may be available in the UK. In the post above he mentions Slaters axles to be used with some US drivers. Are there other options that you folks are aware of? Thank you in advance for any advice. Phil Randall Dallas Texas

Thanks Nile.

John Ericsson has published a new book on the history of American OO scale modeling. It is available now in Kindle format on the Amazon website and will soon be available in a print edition. https://www.amazon.com/Model-Railroading-American-OO-1930-68-ebook/dp/B08WXF5XVN

OO9, There was an American toy train maker called Carlisle & Finch that made large scale mine train toys that ran on 2 inch gauge track. They were more of a caricature than a scale model of mining equipment. Phil

Fred, thanks for posting the old scale info sheets. Nice to have these. P.A. Randall

Building a gauge 2 layout is a neat idea. I have been thinking about doing something in this size. A model of a standard gauge loco should be built in 1:28.25 scale to be exact. In the past some built to 7/16” to the foot scale. This makes the loco a bit big for the gauge. A simple way to get started in American outline would be to convert 1:29 scale equipment to Gauge 2. This would make the track gauge just a bit wide in 1:29. But certainly a bit better looking than 1:29 on gauge 1 track. David Viewing has been doing some work in vintage Gauge 2. http://www.viewing.com/Model Railways/Gauge 2/The Gauge 2 Model Railway.html P.A. Randall Dallas, Texas