bradfordbuffer

Hi Phil you got a mention on YouTube...8m30s to be fair don't normally give this reviewer the views as normally a bit of a arse! He done a roast of Bachmann and got very personal and was nasty...but you have got of lightly 😃 https://youtu.be/_w5rG8_Ix20?si=d_T6RO3_Hmoc28WM

Has any one got a drawing of the depressed center v tank PCA Need one with dimensions I have one that is just line drawing but also need a end elevation. Many thanks

I will try ...but don't think it will print on its own....but may be able to print like Parkside underframe to glue up🧐

Pca depressed center tank. Cement and dry goods. STL off my mini factory think it was about 13quid WB measures up 2.5mm too long I did rescale but made tank look stumpy end pipe work to tank top removed at slicing process detail looks better added later as printed merged with body and looked like 1970 Hornby handrails Obtained the stl file a few years ago got the body to print fine but the chassis never printed correctly. I revisited the stl file and come up with a brain wave merge body (that is substantial) to underframe ....it lives ! On 3rd test print just about there gust one or two supports to replace as clash with detail The printed irons and spring detail are too thin for brass bearing so two options worsley works inside w irons or a 3d printed set...

i can emulsion walls ....but my models go to my brother for spraying when he is on nights..... for the quiet zone 0100hrs to about 0300hrs if he is lucky otherwise it will look like its painted with dulux soft sheen with a 3inch brush

No probs Phil....Will it be dry by Easter?

Phil may be something like this for headcode on your 37....I have never used the items but the reputation of railtec speaks volumes G

as peter kay said....bit of blue for the dads!!!!

One for next time dcc concepts do a stainless steel hand rail bending jig. Possibly feed wire through and twist ends under neath then file the front flat sounds like it would give the desired effect Several suppliers but one hear just to show jig picture https://www.jacksonsmodels.co.uk/dcc-concepts-dcgsr4-stainless-steel-scale-ruler-and-handrail-jig.ir?gad_source=1&gclid=Cj0KCQjwncWvBhD_ARIsAEb2HW8JV93HLyhKN1j3jPIa_WDPnXCXKnF1E7LN5UUaVxTbhzahNGL_LnYaAvN8EALw_wcB

Long green coat....scooter and a paul weller album 😄

Tar for info

Would consideration be given for re scale and supply the range to 3mm scale 1:101?

Could brace it with plastic card 🤔 😁😁

Are these to be made printed or available as STL file for rescaling and home print?

So just a thought....will my pickups be fixed under the lifetime warranty?

Thanks for answers above...I always give a good shake after leaving the bottle in warm water. Just didn't want to blunder through and have the clean up after failed prints G

Hi rm web, just bought a second hand anycubic mono x It has come with 3 bottles of resin but passed there Best before date by 5 months am I best to dump or give it a try? 2 are sealed one is open. G

Can't beat a cambrian kit...old school modelling

Conductive buffers for charging whatever next?

Need to check original stl file some on Thingivers the makers quote 00/Ho so when you scale to 2mm you might be scaling 00 to 2mm when in fact might be 1:87 scale so will end up smaller than expected also check printer /resin settings on lychee there is facility to alter scale on printer settings. If this makes sense. G

If you search cults 3d a n gauge blue spot van is available to re scale and print...just the wagon for your layout

Just needs a rake of mk2 a/b&c on a lime Street to Newcastle!

Forgot to add link https://cults3d.com/en/3d-model/game/oo-model-railway-br-oca-ballast-wagon

Will do Phil!

Forgot to state from cults 3d https://cults3d.com/en/3d-model/game/oo-model-railway-br-oca-ballast-wagon