monkeysarefun Posted June 25, 2021 Share Posted June 25, 2021 (edited) Models of Australian vehicles are few and far between, and modelling in 4mm to the foot as I do because the maths is easier than the standard HO 3.5mm to the foot makes things even harder. Consequently I've been dabbling in 3D printing them. This is my first printable project, produced in Sketchup which is possibly not quite the right tool to use in this case I've decided. But its at least watertight finally and will get printed once I clean up my shed enough to get my printer out again. Its a 1972 Holden Monaro SS, which was a sporty version of the Holden Kingswood with some gills behind the front wheels and 253c.i V8. They've been swept up in the current craze here for Australian muscle cars and are very collectable, prices start at $20,000 for a wreck up to well over $100,000 for one in pristine condition or a competently modified street machine version. Now I have the basic body shape done, I can add the other trim levels such as the povo pack Belmont, the Kingswood and the Premier (different wheels, tail lights, no gills among other minor things ). Then I can try the different body shells such as the station wagon (estate car I think yous call them) , the coupe, the ute and every '70's teenage girls parents worst nightmare, the Sandman panelvan. I've done the glass as a separate file, I'll print that off in clear, I left it off these renders so the inside can be seen, Damn, just noticed I left the wipers off the render image too! Edited June 25, 2021 by monkeysarefun 8 1 Link to post Share on other sites More sharing options...
BernardTPM Posted June 25, 2021 Share Posted June 25, 2021 I did do a Torana version of my HB Viva kit some time ago. I've still got some of the parts, I think. Link to post Share on other sites More sharing options...
monkeysarefun Posted June 25, 2021 Share Posted June 25, 2021 20 minutes ago, BernardTPM said: I did do a Torana version of my HB Viva kit some time ago. I've still got some of the parts, I think. The Torana is on my list of to-dos if I can find blueprints for standard ones as opposed to Bathurst racing specials. I'd like to do some Ford Falcons too, but again most blueprints are for the hardtop from Mad Max.. Link to post Share on other sites More sharing options...
grahame Posted June 26, 2021 Author Share Posted June 26, 2021 Here's something new and interesting from RailNscale - a 3D printed Amphicar 770 from the 1960s: https://railnscale.com/2021/06/24/amphicar-770/ It's 1/160 scale but they will resize to British 1/148 if asked. https://en.wikipedia.org/wiki/Amphicar 1 1 Link to post Share on other sites More sharing options...
Tricky-CRS Posted June 26, 2021 Share Posted June 26, 2021 22 hours ago, BernardTPM said: That's pretty close, though I'm not convinced the 'curved facets*' are there, but the general curve is probably close enough, so that would be a reasonable compomise. The front bumper should match the shape though and there shouldn't be that peak over the front of the roof. The roof also has recessed ribs in the pattern shown here (flashing lights not standard, of course!) Note the straight join line between the curved front section (I assume pressed with the front windscreen surround in real life) and the main cab roof. There are also air-deflectors (similar purpose to those on HST roofs) on each leading corner, outboard of the headlight/grille area, the idea being to create a barrier layer of air so that road dirt can't reach the wing mirrors above them. Said wing mirrors are attached to the doors so where they are shown is OK. * this can be a hard thing to explain, but the most obvious example would be a 50p coin where each of the 'sides' isn't flat, yet meets the next one at an angle. Hi Bernard This is what has come back, very close, I am in 2 minds it is curved just not convinced its faceted but at this scale it is hard to tell. Link to post Share on other sites More sharing options...
BernardTPM Posted June 26, 2021 Share Posted June 26, 2021 (edited) Agreed, it does look like a curve, but still far better than the earlier flat rendition and overall about the right amount. I'd be inclined to accecpt that shape as the faceting isn't alway that obvious in photos and hardly extreme, though the front of the roof still looks a little odd. The pictures are many times larger than the model, of course! Edited June 26, 2021 by BernardTPM 1 Link to post Share on other sites More sharing options...
Tricky-CRS Posted June 26, 2021 Share Posted June 26, 2021 (edited) 2 minutes ago, BernardTPM said: Agreed, it does look like a curve, but still far better than the earlier flat rendition and overall about the right amount. I'd be inclined to accect that shape as the faceting isn't alway that obvious in photos and hardly extreme, though the front of the roof still looks a little odd. The pictures are many times larger than the model, of course! Thank you, I'll print it tomorrow and see what it looks like Edited June 26, 2021 by Tricky-CRS 1 Link to post Share on other sites More sharing options...
Tricky-CRS Posted June 26, 2021 Share Posted June 26, 2021 3 hours ago, BernardTPM said: Agreed, it does look like a curve, but still far better than the earlier flat rendition and overall about the right amount. I'd be inclined to accecpt that shape as the faceting isn't alway that obvious in photos and hardly extreme, though the front of the roof still looks a little odd. The pictures are many times larger than the model, of course! Here is the 3D print of the latest version of the cab, this is not the version for the skip lorry that will have a sign on the roof. I think it looks okay, good to go. 5 1 Link to post Share on other sites More sharing options...
Trewisin Posted July 1, 2021 Share Posted July 1, 2021 Nice one Trickey whats next in the pipe line? Hows your production line of T K's coming on Grahame.? Finished painting ,decals and puttind the windows in yet? As for our fellow Aussie modeller diffrerent I must say all ican remember about cars in Aus were Imports or Holdens. At least it has given us another subject line. regards .Ray. Link to post Share on other sites More sharing options...
Tricky-CRS Posted July 1, 2021 Share Posted July 1, 2021 3 hours ago, Trewisin said: Nice one Trickey whats next in the pipe line? regards .Ray. I will have some new Ford pictures later and possible the next van preview in the next week. 1 Link to post Share on other sites More sharing options...
Tricky-CRS Posted July 1, 2021 Share Posted July 1, 2021 As promised earlier here is the latest test print of Ford Cargos. The fridge box van and BR crew cab have gone back for work. The BR one needs alot of work. 5 1 Link to post Share on other sites More sharing options...
grahame Posted July 1, 2021 Author Share Posted July 1, 2021 Is it possible to give then a clean and dusted coat of primer to make it easier to see the details? Link to post Share on other sites More sharing options...
Steadfast Posted July 1, 2021 Share Posted July 1, 2021 Hi Richard, Nice to see the range coming together. Good selection of bodies there! Are the wheels part of the chassis or are they separate parts for the customer to glue in? The reason I ask is because in some of the pictures the track looks too wide, with the wheels not tucked under the arches enough, both front and rear. This image from Google shows how they are tucked inside the overall width of the vehicle. https://images.app.goo.gl/KGDt2wYwbX6H8TZU6 Easy enough to fix by the customer if need be though. Plenty of diecast models have wheels with a track far wider than the model! I must say, the detail of the wheels is nice, visible nuts and everything. Jo 1 Link to post Share on other sites More sharing options...
Tricky-CRS Posted July 2, 2021 Share Posted July 2, 2021 10 hours ago, Steadfast said: Hi Richard, Nice to see the range coming together. Good selection of bodies there! Are the wheels part of the chassis or are they separate parts for the customer to glue in? The reason I ask is because in some of the pictures the track looks too wide, with the wheels not tucked under the arches enough, both front and rear. This image from Google shows how they are tucked inside the overall width of the vehicle. https://images.app.goo.gl/KGDt2wYwbX6H8TZU6 Easy enough to fix by the customer if need be though. Plenty of diecast models have wheels with a track far wider than the model! I must say, the detail of the wheels is nice, visible nuts and everything. Jo Wheels on the vans and cars are fixed but separate on the bigger vehicles. All the pictures so far have been quick test builds where I have not necessarily filled everything down. Before production I will do a full display set and paint them and fine tune the master set. Still not made my mind up on the best production and retail route yet. 2 Link to post Share on other sites More sharing options...
Trewisin Posted July 2, 2021 Share Posted July 2, 2021 Nice one Jo ,Grahame should be able to get some info from your add on nice pics. Do you still make decals? for rear end hazard or slow moving vehicles. Yes Richard as Grahame said it would help if they were in white primer . They are still excellent and I like the various box van finishes. Regards to all .Ray. Link to post Share on other sites More sharing options...
Tricky-CRS Posted July 3, 2021 Share Posted July 3, 2021 Next up sneak preview - I have spotted a few things to get altered 1 Link to post Share on other sites More sharing options...
grahame Posted July 3, 2021 Author Share Posted July 3, 2021 On 02/07/2021 at 09:14, Trewisin said: Yes Richard as Grahame said it would help if they were in white primer . I'd suggest grey rather than white. It's often used in photography and does help see details more clearly. 1 Link to post Share on other sites More sharing options...
RMweb Gold Royal42 Posted July 3, 2021 RMweb Gold Share Posted July 3, 2021 Finally getting to the finish line with this AEC Matador 6x6. Herewith a view of the various stages I've managed so far. Now that I feel I have a grip on this CAD milarky, I might venture into building some standard road vehicles. cheers, Mike 4 1 1 Link to post Share on other sites More sharing options...
Trewisin Posted July 4, 2021 Share Posted July 4, 2021 Hi all, Richard Iknow that they use to call them Dagenham dust bins but those wing mirrors look like speed cameras,otherwis your Transit looks good. Thanks Grahame yes a grey primer would look better. Mike you 3D prints of your tankers look superb .Look forward to seeing more projects. Regars Ray 1 Link to post Share on other sites More sharing options...
Tricky-CRS Posted July 4, 2021 Share Posted July 4, 2021 8 minutes ago, Trewisin said: Hi all, Richard Iknow that they use to call them Dagenham dust bins but those wing mirrors look like speed cameras,otherwis your Transit looks good. Thanks Grahame yes a grey primer would look better. Mike you 3D prints of your tankers look superb .Look forward to seeing more projects. Regars Ray Until I see the 3D file I suspect it will be these or no wing mirrors due to minimal material thickness and strength. Wing mirrors are an issue that I have not fully resolved, I think they should be separate but then may be to small to handle, in production and by modeller. This is a problem on all the vehicles so far but seems to stand out more on this one for some reason. 1 Link to post Share on other sites More sharing options...
KeithHC Posted July 4, 2021 Share Posted July 4, 2021 17 minutes ago, Trewisin said: Hi all, Richard Iknow that they use to call them Dagenham dust bins but those wing mirrors look like speed cameras,otherwis your Transit looks good. Thanks Grahame yes a grey primer would look better. Mike you 3D prints of your tankers look superb .Look forward to seeing more projects. Regars Ray I thought it was the Cortina that was called the Dagenham dustbin. The transit was built at Langley and Eastleigh. Keith 1 Link to post Share on other sites More sharing options...
Trewisin Posted July 4, 2021 Share Posted July 4, 2021 Thanks Richard , I hope the print comes out much better than the cad. The print of the Ford trucks came out ok The cad didnt look that big before you printed them .As you say it might have to be add ons . Good luck regards.Ray. Link to post Share on other sites More sharing options...
Trewisin Posted July 4, 2021 Share Posted July 4, 2021 Thanks Keith Hc. just using the expression as an oldFord term in general. iforgot that the Transit was madein Eastliegh. I suppose there now called Turkey's as they are made their now. Regards Ray. 1 Link to post Share on other sites More sharing options...
RMweb Premium Ian Morgan Posted July 4, 2021 RMweb Premium Share Posted July 4, 2021 I still think etches are the way forward for wing/door mirrors, windscreen wipers, roof racks, etc. 1 4 Link to post Share on other sites More sharing options...
m0rris Posted July 4, 2021 Share Posted July 4, 2021 (edited) Probably worth adding to the somewhat conspicuous silence on my range - there's been a little hold up getting the models to print in N gauge. Essentially, I am trying to find a viable alternative to shapeways at present which is the thorn in that particular side, if anyone has any tips they'd be greatly appreciated. I have however been able to get a trial batch of 00 gauge Austin Landcrabs, Mk2 Granadas, Ital vans and Hillman Hunters coming from the printers that do my 00 gauge multiple units so here's a little teaster of what is to come in about a fortnights time: Here's the list of what is modelled at present: Metro and Rover 100 2 door Rover 800 Rover 75/MG ZT Hillman Hunter (various grills including the Humber Sceptre) Morris Marina/Ital - saloon, van and coupe Jaguar S type Ford Cortina Mk5 Ford Granada Mk1 and Mk2 Austin 1800/3 Litre/Wolseley Six Austin Maxi Triumph 2000 Mk2 Austin Allegro and VDP The plan at present is to get approximately another 10 whilst I sort out the printing - including Hillman Avenger, BL Princess, a small collection of 90s cars (Fiesta, Astra, Escort, LDV Convoy etc). Edited July 4, 2021 by m0rris 6 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now