Shaun66 Posted September 13, 2018 Share Posted September 13, 2018 Would be great to see these done in OO gauge if possible, be something different. Link to post Share on other sites More sharing options...
bigP Posted September 16, 2018 Share Posted September 16, 2018 (edited) -- Edited January 31, 2021 by bigP Deleted 1 Link to post Share on other sites More sharing options...
RMweb Gold Revolution Ben Posted September 16, 2018 RMweb Gold Share Posted September 16, 2018 (edited) Hello all, Happened to be in Leamington last week and in the space of an hour around lunchtime saw three car trains passing through. The first two were only the covered IPAs, the last one an interesting mix of twin flats (loaded with Discoveries), 2 x covered IPAs 4-car sets similarly loaded and at the rear 3 x WIA 5-car sets. A colleague with me said they'd have the Jaguar F-types in them! Cheers Ben A. Edited September 16, 2018 by Ben A Link to post Share on other sites More sharing options...
bigP Posted September 16, 2018 Share Posted September 16, 2018 (edited) -- Edited January 31, 2021 by bigP Deleted Link to post Share on other sites More sharing options...
Tugs Posted September 17, 2018 Share Posted September 17, 2018 Oh my, here's hoping that Revolution decide to do them in OO as well - I know I'd buy a fair number if they did! Link to post Share on other sites More sharing options...
RMweb Gold Revolution Ben Posted November 4, 2018 RMweb Gold Share Posted November 4, 2018 Hello all, CADs for the IPAs are coming along. Those for the plain flat twins, and the twins with side stakes, are now done. The CADs for the covered types need a small amount of revision, but should be completed within the next fortnight. Cheers Ben A. 5 Link to post Share on other sites More sharing options...
RMweb Gold Revolution Ben Posted February 9, 2019 RMweb Gold Share Posted February 9, 2019 Hi Richard, As with all our models, they'll only go ahead if enough people pre-order. Though we haven't yet opened the order book as we don't want them to compete with the Sturgeons and HOAs which are available to order now. I anticipate that we will open the order book in the next 6-8 weeks and hope to get first samples by TINGS (The International N Gauge Show at Leamington in September.) cheers Ben A. 2 Link to post Share on other sites More sharing options...
Mike Harvey Posted April 2, 2019 Share Posted April 2, 2019 Ordering page now live. Separate pages for the 2 wagon, and 4 wagon sets. https://www.revolutiontrains.com/product/ipa-car-carriers-quad-wagon-sets/ https://www.revolutiontrains.com/product/ipa-car-carriers-twin-wagon-sets/ 1 Link to post Share on other sites More sharing options...
RMweb Gold Revolution Ben Posted April 2, 2019 RMweb Gold Share Posted April 2, 2019 Hello all, The order book for the N-gauge IPA car carriers twins has opened. They are available in both STVA liveries and we are offering two different numbers for each type, flat, with stakes or covered. Twin sets: http://www.revolutiontrains.com/product/ipa-car-carriers-twin-wagon-sets/ In the mid-2000s lots of the twins were given side screens and roofs and remarshalled into permanently coupled sets of four (though they retained the buffers at the inner coupling between the two sets) and we are offering these too: http://www.revolutiontrains.com/product/ipa-car-carriers-quad-wagon-sets/ Note that the quad sets offer prototypically correct variations in the postition of the parking brake wheel between the initial and later conversions. The twins are being offered at an early-bird price of £37; in a short period this will increase to £39, while the quads are being offered at an early-bird price of £74, increasing to £78. cheers Ben A. 3 1 Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted April 2, 2019 RMweb Gold Share Posted April 2, 2019 A suitable number of sets ordered for Banbury 1 Link to post Share on other sites More sharing options...
RMweb Premium steam-driven boy Posted April 3, 2019 RMweb Premium Share Posted April 3, 2019 Hi, Deposits - thankfully, my but it soon adds up - paid. I've been studying YouTube for combinations so was prepared for once... Regards, Gerry. 1 Link to post Share on other sites More sharing options...
RMweb Premium JR_P Posted April 4, 2019 RMweb Premium Share Posted April 4, 2019 So, are there any automotive flows on the southern portion of the WCML (post 2000)?.... and if so, would the vehicles be Jaguar-Landrover?.... trying to figure out what Oxford diecast vehicles to load the IPAs with. .... or am I going to just have to use a bit of ‘artistic license’....?! What is the typical motive power/operator?.... would be great if it were Cl 92, since I already have these on order. I have tried a bit of Googling, but in this instance, you kinda need to know the answer before you can pose the question! Thanks all! 1 Link to post Share on other sites More sharing options...
Steadfast Posted April 4, 2019 Share Posted April 4, 2019 Jaguar Land Rover vehicles are exported via Southampton docks and arrive on the single deck STVA wagons behind an EWS/ DB 66. Not sure whether it hits the WCML GBRf have a contract with Ford, which can see a 92 on the front and I believe is routed via the WCML Jo 1 Link to post Share on other sites More sharing options...
davepallant Posted April 4, 2019 Share Posted April 4, 2019 Some interesting driver's videos on Youtube by Don Coffey who appears to be a driver on TPE. This is a video on a Class 68 training run and he is just about to go past a train of IPAs on his right. All red flats with and without stakes but without covers. Pulled by a GBRf 92 and with an 08 shunter at the back. This is at Speke near Freightliner at Garston near Liverpool. https://youtu.be/KQvqFFILSnU?t=419 Dave 3 1 Link to post Share on other sites More sharing options...
RMweb Premium steam-driven boy Posted April 5, 2019 RMweb Premium Share Posted April 5, 2019 Hi, Ben A stated on the N Gauge Forum on 02/04/19: Quote In terms of what to run with what, I am aiming to produce our usual consist diagram to show how they operate asap. I spend far more time than I should looking at the video postings (including US Railroad manifests to try and learn those too!) and, as with Dave's post above, there's plenty tucked away in general freight YouTubes. Regards, Gerry. Link to post Share on other sites More sharing options...
RMweb Premium njee20 Posted April 5, 2019 RMweb Premium Share Posted April 5, 2019 14 hours ago, JR_P said: So, are there any automotive flows on the southern portion of the WCML (post 2000)?.... and if so, would the vehicles be Jaguar-Landrover?.... trying to figure out what Oxford diecast vehicles to load the IPAs with. Yes, loads. If you look at Andy Jupe's excellent pictures here you'll see lots of covered quad sets with Land Rovers and Range Rovers (they look like Freelanders and Evoques in the main), at Rugby, with 92 or 66 haulage. One shows a 90 DIT behind a 92. Here's a 92 at Northampton, from Revolution's promo material: 2 Link to post Share on other sites More sharing options...
bigP Posted April 5, 2019 Share Posted April 5, 2019 (edited) -- Edited January 31, 2021 by bigP Deleted 1 Link to post Share on other sites More sharing options...
RMweb Gold Stuart A Posted April 5, 2019 RMweb Gold Share Posted April 5, 2019 (edited) Original grey ones just in my time frame, twin pack of each ordered. I know Oxford do Landrovers, but thinking a selection of these 1:160 Busch European Emergency Service LWB Landrovers would make a good load; https://www.en.dm-toys.de/produktdetails/items/Busch_8374.html https://www.en.dm-toys.de/produktdetails/items/Busch_8376.html https://www.en.dm-toys.de/produktdetails/items/Busch_8378.html Edited April 5, 2019 by Stuey Link to post Share on other sites More sharing options...
Fat Controller Posted April 5, 2019 Share Posted April 5, 2019 1 hour ago, Stuey said: Original grey ones just in my time frame, twin pack of each ordered. I know Oxford do Landrovers, but thinking a selection of these 1:160 Busch European Emergency Service LWB Landrovers would make a good load; https://www.en.dm-toys.de/produktdetails/items/Busch_8374.html https://www.en.dm-toys.de/produktdetails/items/Busch_8376.html https://www.en.dm-toys.de/produktdetails/items/Busch_8378.html When these wagons worked through the tunnel to Italy, as part of trains carrying old-style Minis and Rover saloons on double-deckers, Land-Rover had a big contract with the Italian government to supply vehicles (mainly Defenders). These were delivered already lettered for the various branches of the state, so we would get 'Polizia', 'Vigile de Fuoco', 'Guardia Finanzia', 'Dogna', 'Guardia d' Costiere' alongside unlettered olive green or Navy Blue ones , Range Rovers and Discoveries. 3 1 Link to post Share on other sites More sharing options...
RMweb Premium njee20 Posted April 5, 2019 RMweb Premium Share Posted April 5, 2019 Going to get seriously expensive using any number of those Busch ones. I'd like to load mine, but can't decide how. Looks to be 3 cars/vans per flat, so I'd need 60, which will cost almost as much as the wagons! Link to post Share on other sites More sharing options...
Mike Harvey Posted April 5, 2019 Share Posted April 5, 2019 With much of the cars concealed in the covered wagons I could see the case for a simplified resin casting with a bit of paint on rather than £15 worth of Oxford’s Jaguars/Discoveries. For the open wagons, we may need to bite the expensive bullet. 1 1 Link to post Share on other sites More sharing options...
Steadfast Posted April 5, 2019 Share Posted April 5, 2019 It's a bit trickier for those modelling the Portbury- Mossend flows. There's no available Peugeot/Fiat/Citroen vans or Honda cars in 1:148. At least if someone does a 3D print of suitable types they'll be nice and lightweight Jo Link to post Share on other sites More sharing options...
RMweb Gold Revolution Ben Posted April 5, 2019 RMweb Gold Share Posted April 5, 2019 Hi Mike, For the covered wagons I did wonder whether a hollow 3D print in clear, that can be easily masked and sprayed, might be the way to go... cheers Ben A. 1 Link to post Share on other sites More sharing options...
RMweb Gold roundhouse Posted April 5, 2019 RMweb Gold Share Posted April 5, 2019 (edited) 8 hours ago, bigP said: You’d best get two rakes - one loaded, one empty I will be doing just the empty ones. As it is, I am having a clear out of locos and coaches tomorrow as the space in the stock boxes has been used by the extra Arbel sets. Edited April 5, 2019 by roundhouse Link to post Share on other sites More sharing options...
RMweb Premium Claude_Dreyfus Posted April 8, 2019 RMweb Premium Share Posted April 8, 2019 On 05/04/2019 at 18:44, Steadfast said: It's a bit trickier for those modelling the Portbury- Mossend flows. There's no available Peugeot/Fiat/Citroen vans or Honda cars in 1:148. Wouldn't be a cheap do, but the Honda Jazz is available as part of this set (including the Nissan Micra). Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now