woko Posted December 30, 2020 Share Posted December 30, 2020 Looking good Mike, printing at an angle definitely yields better results. Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted December 30, 2020 RMweb Gold Share Posted December 30, 2020 1 hour ago, woko said: Looking good Mike, printing at an angle definitely yields better results. Plus the added bonus of plenty of motorway cones! Mike. 1 Link to post Share on other sites More sharing options...
MikeTrice Posted December 30, 2020 Author Share Posted December 30, 2020 Yes, it is a bit OTT 1 Link to post Share on other sites More sharing options...
RMweb Gold JCL Posted January 2, 2021 RMweb Gold Share Posted January 2, 2021 After seeing @woko’s buildings and reading @Locksley’s layout thread, I thought I’d have a go at drawing up and printing a GNR waiting room. He recommended .3mm mortar lines that are .3mm deep - which worked out really well. The layers of bricks means the walls are 4mm thick in places, so it’s really sturdy! I repaired the building in MS 3D Builder, sliced it in Lychee, then printed the thing flat onto the build plate of the Mono X with a small margin at the bottom that can be set into a platform. I used standard resin settings. I completely forgot to support the window structures, so they had a bit of a tough time. It has a hipped roof which I’ll probably do using thick card or similar. I’ve used this first print as a test for my painting. The software is telling me it cost $1.60 to print. 10 4 Link to post Share on other sites More sharing options...
RMweb Premium njee20 Posted January 2, 2021 RMweb Premium Share Posted January 2, 2021 Great job! Also eyeing up doing some buildings of my printers, that’s a lovely result you’ve got there. 1 Link to post Share on other sites More sharing options...
2750Papyrus Posted January 2, 2021 Share Posted January 2, 2021 Very nice! Any plans for further GN buildings? 1 Link to post Share on other sites More sharing options...
alangdance Posted January 2, 2021 Share Posted January 2, 2021 Lovely little model. I have been trying to design some buildings in Fusion but due to the number of bricks required I have found the software is crashing when trying to copy another row of bricks. Do you have any tips on how to pruduce the bricks. Alan 1 1 Link to post Share on other sites More sharing options...
woko Posted January 2, 2021 Share Posted January 2, 2021 That looks fantastic sir! I have yet to do any resin printing for my buildings, but that result you have there looks great, I think I need to print something, top work sir. @alangdance If you are struggling with the software, you could try splitting the model up into smaller sections to print! It may also be that you don't have enough RAM/memory in your machine to handle heavy files? 3D modelling does require a bit of a juicy machine in my experience! I chuck crazy amount of triangles around on my PC, hence having 64gb of memory! This is however a little excessive, but I would recommend anywhere between 16-32gb if possible of memory. 1 Link to post Share on other sites More sharing options...
RMweb Gold simonmcp Posted January 2, 2021 RMweb Gold Share Posted January 2, 2021 13 minutes ago, woko said: That looks fantastic sir! I have yet to do any resin printing for my buildings, but that result you have there looks great, I think I need to print something, top work sir. @alangdance If you are struggling with the software, you could try splitting the model up into smaller sections to print! It may also be that you don't have enough RAM/memory in your machine to handle heavy files? 3D modelling does require a bit of a juicy machine in my experience! I chuck crazy amount of triangles around on my PC, hence having 64gb of memory! This is however a little excessive, but I would recommend anywhere between 16-32gb if possible of memory. Are you using a desktop with a separate graphics card or a laptop with integrated graphics? Perhaps @alangdance is using an online version, I managed to 'break' an online version with only a very small brick wall. Simon Link to post Share on other sites More sharing options...
billbedford Posted January 2, 2021 Share Posted January 2, 2021 2 hours ago, alangdance said: Lovely little model. I have been trying to design some buildings in Fusion but due to the number of bricks required I have found the software is crashing when trying to copy another row of bricks. Do you have any tips on how to pruduce the bricks. Alan I'd use rectangular patterns for the mortar lines. Link to post Share on other sites More sharing options...
alangdance Posted January 2, 2021 Share Posted January 2, 2021 I am using a desktop PC but with only 8g of memory. I believe fusion is installed onto my pc. #I also think the graphic card is built into the motherboard so that could be an issue. Will look into more ram. Regards Alan 1 Link to post Share on other sites More sharing options...
billbedford Posted January 2, 2021 Share Posted January 2, 2021 (edited) 11 minutes ago, alangdance said: I am using a desktop PC but with only 8g of memory. I believe fusion is installed onto my pc. #I also think the graphic card is built into the motherboard so that could be an issue. Fusion is on the cloud. You need only 4Gb memory on your PC, but check which version of Windows you are using Edited January 2, 2021 by billbedford Link to post Share on other sites More sharing options...
RMweb Gold JCL Posted January 2, 2021 RMweb Gold Share Posted January 2, 2021 I used Blender to model the waiting room. I'll be doing the rest of the buildings for Havenhouse (Lincs) over the next few weeks. I think I'll start a thread to put them on. 1 Link to post Share on other sites More sharing options...
monkeysarefun Posted January 2, 2021 Share Posted January 2, 2021 4 hours ago, JCL said: I used Blender to model the waiting room. I'll be doing the rest of the buildings for Havenhouse (Lincs) over the next few weeks. I think I'll start a thread to put them on. I realty like the architecture add on or whatever its called in Blender. especially the roofing bit. Just choose the tile/roof covering that you want and it it creates a ready tiled 3D roof. Link to post Share on other sites More sharing options...
RMweb Gold JCL Posted January 2, 2021 RMweb Gold Share Posted January 2, 2021 Interesting, I'll have a look for it. Thanks for letting me know. Link to post Share on other sites More sharing options...
alangdance Posted January 3, 2021 Share Posted January 3, 2021 Any chance of a little tutorial on how you do it on blender. Alan Link to post Share on other sites More sharing options...
MikeTrice Posted January 3, 2021 Author Share Posted January 3, 2021 I note a beta version of Chitubox that supports the Mono X is imminent. Link to post Share on other sites More sharing options...
RMweb Gold JCL Posted January 3, 2021 RMweb Gold Share Posted January 3, 2021 6 hours ago, MikeTrice said: I note a beta version of Chitubox that supports the Mono X is imminent. I saw that, something else to try as people think it’s the bees knees. Link to post Share on other sites More sharing options...
RMweb Gold JCL Posted January 3, 2021 RMweb Gold Share Posted January 3, 2021 16 hours ago, alangdance said: Any chance of a little tutorial on how you do it on blender. Alan I can in a couple of weeks - I’ll put it on the buildings thread Link to post Share on other sites More sharing options...
RMweb Premium njee20 Posted January 3, 2021 RMweb Premium Share Posted January 3, 2021 1 minute ago, JCL said: I saw that, something else to try as people think it’s the bees knees. I think actually a lot of people think Lychee is better (I didn't, it's more versatile, but I've no issues with how Chitbuox works), merely that Chitubox is the ubiquitous solution for every printer other than Anycubic! Link to post Share on other sites More sharing options...
alangdance Posted January 3, 2021 Share Posted January 3, 2021 45 minutes ago, JCL said: I can in a couple of weeks - I’ll put it on the buildings thread That would be great Link to post Share on other sites More sharing options...
monkeysarefun Posted January 3, 2021 Share Posted January 3, 2021 (edited) 19 hours ago, JCL said: Interesting, I'll have a look for it. Thanks for letting me know. Yeah its called archipack and comes rolled into Blender already but you need to turn it on in the preference to use it Oh you need to do something like adding the libraries too from memory otherwise it hangs, unless they've fixed that bit up from when it happenned to me two years ago! Heres a bit of a rundown, roofing bit is around 7.30 minutes. You can create several roof types, slate, corrugated surfaces etc with just a button click - its pretty cool. Oh yeah, it even automatically adds the gutters for you too! Edited January 3, 2021 by monkeysarefun 1 Link to post Share on other sites More sharing options...
RMweb Gold JCL Posted January 5, 2021 RMweb Gold Share Posted January 5, 2021 On 03/01/2021 at 10:49, monkeysarefun said: Yeah its called archipack and comes rolled into Blender already but you need to turn it on in the preference to use it Oh you need to do something like adding the libraries too from memory otherwise it hangs, unless they've fixed that bit up from when it happenned to me two years ago! Heres a bit of a rundown, roofing bit is around 7.30 minutes. You can create several roof types, slate, corrugated surfaces etc with just a button click - its pretty cool. Oh yeah, it even automatically adds the gutters for you too! Unfortunately it's not working for me on 2.90.0. I only see a semi-transparent black box that I have to Esc out of. Link to post Share on other sites More sharing options...
monkeysarefun Posted January 5, 2021 Share Posted January 5, 2021 (edited) 11 minutes ago, JCL said: Unfortunately it's not working for me on 2.90.0. I only see a semi-transparent black box that I have to Esc out of. Being a trendsetter I've got 2.91 and it works for me. Did you do the "render preset thumbs" bit ? - In preferences -> add-ons select the dropdown arrow beside the archipack add-on and it should open up preferences for it. A bit of a way down is a wide button with "Render Preset Thumbs" on it. Press that, a DOS box will come up and run through a script that renders each element. Can take a little while and it is confusing because it says "COMPLETED" after its done each element that makes it looks like it means its actually completed everything, so just let it run for 15 minutes or so.... Edited January 5, 2021 by monkeysarefun Link to post Share on other sites More sharing options...
RMweb Gold JCL Posted January 5, 2021 RMweb Gold Share Posted January 5, 2021 18 hours ago, monkeysarefun said: Being a trendsetter I've got 2.91 and it works for me. Did you do the "render preset thumbs" bit ? - In preferences -> add-ons select the dropdown arrow beside the archipack add-on and it should open up preferences for it. A bit of a way down is a wide button with "Render Preset Thumbs" on it. Press that, a DOS box will come up and run through a script that renders each element. Can take a little while and it is confusing because it says "COMPLETED" after its done each element that makes it looks like it means its actually completed everything, so just let it run for 15 minutes or so.... Thank you! It was me. I'll write up some stuff about this on the other thread when I have a look at it, rather than taking over this one. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now