Jump to content
 

Felton Lane (Goods). West Durham in the 1940's.


Worsdell forever

Recommended Posts

  • RMweb Gold

Thanks Mick & Ian.

 

With the signal cabin almost complete we now need something for it to do...

 

Central division signals - not all NER signals (and they really loved their signals) were not all the pretty and almost twee McKenzie & Holland slotted post type so well provided to us modellers by Danny Pinnock. Many were quite ordinary, these are typical of the central division (basically the S&D or there abouts) but all types seem to be used in many areas. I've trawled books for photos of west Durham lines, including of course the Stainmore book and this signal is the first result. The arm is an MSE Stevens H&B/LSWR type with slightly modified spectacle. the post is 20' high and it will be the yard starter. It will have a square cap fitted and a square LNER lamp fitted.

 

Please ignore the blutac, it's holding the arm level.

 

post-7104-0-13889300-1330463880.jpg

Link to post
Share on other sites

  • RMweb Gold

The first signal is just about there, needs the lenses colouring and a bit of weathering. I'm not too happy with the post cap, I may change this at some point, it's only plasticard after all. It won't be operating for Birtley next weekend, simply not enough time... There will be another similar to this and as platform starter (to replace the Northern division one already there) and a bracket for the home signals, eventually.

 

post-7104-0-55748700-1330633430.jpg

Link to post
Share on other sites

  • RMweb Gold

I've propped the old backscene up to get some shots of the signal cabin in position from the front (the green mess is the residue from where trees were fixed). The new signal may end up as the platform starter as it probably should have something shorter here as sighting under the bridge is not good.

 

J21 5076 shunts an LMS long wheelbase van out of the yard and into the platform.

post-7104-0-44427600-1330677154.jpg

 

View under the bridge of the signal cabin.

post-7104-0-01301400-1330677157.jpg

Link to post
Share on other sites

  • RMweb Gold

Thanks for the comments, I'm quite pleased with the shot through the bridge, I think I need to alter the camera's position slightly to fit a bit more of the cabin in.

Yesterday I got the point and remaining track ballasted, one of the next jobs is to fit the backscene and paint it sky blue then the rest of the scenic work can be finished.

 

Link to post
Share on other sites

  • RMweb Gold

and paint it sky blue

 

Interesting the colour of the sky in the two shots above.

 

I am guessing that one was taken indoors and the other outdoors to get that vivid blue colour?...unless the bridge is playing games with the camera's light meter....

Link to post
Share on other sites

  • RMweb Gold

Hi Pete, they do look different but the layout didn't move at all between the two shots, both taken using 'ordinary' fluorescent lamps (can't afford that many 'daylight' lamps), one is taken looking down and the other up. I was also using centre spot metering and the subject in the centre of each shot are the opposite, one light (making the sky dark) and the other dark (the loco, making the sky light). Anyway I mixed plenty of the blue paint a while ago so it should all be the same in the end, one day I'll paint a few clouds and greenery on it.

 

Edit - in reality it looks like the first shot.

Link to post
Share on other sites

  • RMweb Gold

The rails have now been painted and the new backscene fitted, this now needs a bit of filler and more coats of paint. The wood in the corner will be hidden by a tree. The signal cabin has been fixed in place and some greenery added around it.

 

post-7104-0-84657400-1330869100.jpg

Link to post
Share on other sites

  • RMweb Gold

Scenics in the 'corner' are just about done. I've added a fence (Ratio) and filled in behind it with bushes and trees, the joints in the backscene being hidden by the trees.

 

post-7104-0-78297900-1330940240.jpg

 

post-7104-0-08228900-1330940246.jpg

 

post-7104-0-46729100-1330940255.jpg

 

I found the best way to get a better shot of the signal cabin from under the bridge was to use my phone, it's a nice fit under the bridge and leaning it against the weigh office and using the 2 second timer it's managed quite well.

post-7104-0-71224700-1330940235.jpg

Link to post
Share on other sites

  • RMweb Gold

Pretty much got everything done to the layout for Birtley this weekend so I decided to have a play and iron out a few little niggles in the track that were annoying me. There was one intermittent dry joint, a couple of tight spots through points and one tender with it's back to back too close. While I was doing this I took a few photos. Halfway through this a new (well ok, almost antique but new to me) lens arrived for my camera so some of the photos were taken with the 18-55mm that came with the camera and some with the 'new' 50mm f1.7. I have had to dust the layout as this lens is so clear it looked a right mess.

 

'Old' 18-55mm Lens.

post-7104-0-81744600-1331050182.jpg

 

J21 0-6-0.

post-7104-0-06143200-1331050189.jpg

 

post-7104-0-05654400-1331050198.jpg

 

post-7104-0-93118800-1331050206.jpg

 

Q5 0-8-0.

post-7104-0-54653400-1331050214.jpg

 

'New' 50mm Lens.

post-7104-0-90280100-1331050327.jpg

 

post-7104-0-54774600-1331050335.jpg

 

N10 0-6-2.

post-7104-0-39674900-1331050343.jpg

 

post-7104-0-73725400-1331050350.jpg

 

post-7104-0-75586300-1331050358.jpg

 

post-7104-0-72098800-1331050367.jpg

 

post-7104-0-72966700-1331050375.jpg

 

post-7104-0-96598000-1331050383.jpg

 

post-7104-0-81479400-1331050391.jpg

 

Probably the largest loco to squeeze down the branch, V2 2-6-2.

post-7104-0-05130500-1331050399.jpg

Link to post
Share on other sites

  • RMweb Premium

Paul, if there was an automatic function to 'Like' every post and photo in a thread, I'd click on it for yours. Your modelling is simply stunning.

Link to post
Share on other sites

Guest Dave.C

It was about time you moved on from that Box Brownie :O

 

I can now see things that I haven't seen before in the flesh, I must upgrade my glasses

Link to post
Share on other sites

  • 1 month later...

Superb - just worked my way through the thread, and enjoyed every bit!! The coal drops look spot on for Alston - hmmnnnn :O !!

 

Did you put a stove in for the bobby to brew up, or did technology not stretch beyond the black cast iron ? Great stuff !

Link to post
Share on other sites

  • 1 month later...

Hi Ian.

 

The ballast is Woodland scenics fine black.

That's something I'd like to look into myself, doing a North Eastern-type loco shed at one end of my 'Thoraldby' layout. Have you got a product code reference? (My local model shop never seems to have much of anything of use these days!) Like the layout idea. I used Wills' sheets when constructing my coal cells both on 'Thoraldby' and my son's layout 'Kirkrigg'. almost all the buildings on 'Kirkrigg' were scratch-built as opposed to about 70% on 'Thoraldby'. A lot of what I do is kit-bashing.

Link to post
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
Lovely work, though I can't help feeling the rug is a little exotic?

 

You've never been in a signal box then?!

 

The box looked even better in the flesh too! Lovely piece of modelling :)

Link to post
Share on other sites

Guest Tom F

A very enjoyable day seeing Felton Lane (plus having a play). That coupling system is superb Paul, certainly takes the 'hand of god' out of the equation!

 

I look forward to seeing it on Wednesday :)

 

Cheers

Link to post
Share on other sites

Just for reference, a rug in a signal box -

 

post-125-0-62512800-1343053494.jpg

 

Probably once in pride of place in someone's front room, now rather tired in appearance but nice when you're on your feet for nine - twelve hours straight!

Link to post
Share on other sites

Just for reference, a rug in a signal box -

 

post-125-0-62512800-1343053494.jpg

 

Probably once in pride of place in someone's front room, now rather tired in appearance but nice when you're on your feet for nine - twelve hours straight!

 

Nice pic; in the boxes I used to work in, the rugs were usually put over the lever frame to keep the draughts out!

(along with bits of carpet around the door frame for the same reason)

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...