RMweb Premium 21C123 Posted March 19, 2020 RMweb Premium Share Posted March 19, 2020 Hi What sort of DCC socket is fitted ? thanks Roger Link to post Share on other sites More sharing options...
two tone green Posted March 19, 2020 Share Posted March 19, 2020 Any photos please especially of the DCC socket and place for a speaker. Thanks. 1 Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted March 19, 2020 RMweb Gold Share Posted March 19, 2020 1 hour ago, 21C123 said: What sort of DCC socket is fitted ? 21 pin according to the box and slip inside. Runs beautifully and as you can see the Titfield edition patches are flat. 3 1 Link to post Share on other sites More sharing options...
dpgibbons Posted March 19, 2020 Share Posted March 19, 2020 (edited) It's not very illuminating, but the link here illustrates the slide-out pcb with speakers underneath. According to the Hornby Mag review, a pair of 15x11mm sugarcube speakers clip in to enclosures under the pcb with no soldering required. Their review model - presumably the factory spec - used a Zimo MX644 decoder with a custom sound set. Hopefully we'll soon know what third party options will fit and if there is room for larger speakers and stay-alives. Edited March 19, 2020 by dpgibbons 1 Link to post Share on other sites More sharing options...
Welsh Signaller Posted March 19, 2020 Share Posted March 19, 2020 Dapols fantastic Class 14/48/58XX locomotives available now from MonBank Model Railway Centre 2 1 Link to post Share on other sites More sharing options...
Dreadnought05 Posted March 20, 2020 Share Posted March 20, 2020 Looking to get #1426, is it correct to have no topfeed with later emblem? Link to post Share on other sites More sharing options...
RMweb Gold PaulRhB Posted March 20, 2020 RMweb Gold Share Posted March 20, 2020 9 hours ago, two tone green said: Any photos please especially of the DCC socket and place for a speaker. Thanks. This is the instructions so you should be able to gauge size from the speakers. 1 2 1 Link to post Share on other sites More sharing options...
dpgibbons Posted March 20, 2020 Share Posted March 20, 2020 Thanks. Looks like it takes 2x standard 15x11mm sugar cube speakers. No we just need to know if there is room for a decent stay-alive. Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted March 20, 2020 RMweb Premium Share Posted March 20, 2020 (edited) 5 hours ago, Dreadnought05 said: Looking to get #1426, is it correct to have no topfeed with later emblem? Do you mean specifically that loco or generally? 1426 was a Slough loco till the late 50s and worked the West Ealing to Greenford branch (where I live) but was still black no top feed then. I havent seen photos of it after that. Essential to check photos if you are bothered: rail-online is very good and has many of the class. Some never got repainted green at all and top feed (and tool box positions) could change on the same loco even into the 60s. If you arent worried at a loco by loco level then in BR days any form is reasonable! Edited March 20, 2020 by Hal Nail 1 Link to post Share on other sites More sharing options...
coeurdelyon Posted March 20, 2020 Share Posted March 20, 2020 Hi, Number 1426 had a major overhaul at Caerphilly works in April 1960 when a non top feed boiler was fitted and then repainted in B.R. lined green livery with late crest. Many thanks for the comments regarding the models, I believe this is the first mass produced RTR model to be produced with a fully compensated chassis to improve track holding and electrical pick-up. Also we wanted models to be well protected whilst in transit so pleased to hear that you like the new packaging. Kind Regards to all, Richard 5 1 1 Link to post Share on other sites More sharing options...
two tone green Posted March 20, 2020 Share Posted March 20, 2020 Thanks for the details on the DCC installation. Link to post Share on other sites More sharing options...
Miss Prism Posted March 20, 2020 Share Posted March 20, 2020 What was a typical boiler-swap interval for a 14xx? 3 years? I don't suppose they did much mileage. Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted March 20, 2020 RMweb Premium Share Posted March 20, 2020 19 minutes ago, Miss Prism said: What was a typical boiler-swap interval for a 14xx? 3 years? I don't suppose they did much mileage. Its amazing how it builds up: Lostwithiel to Fowey and back is only c15 miles Assume 10 trips (including to and from St Blazey) say 5 days a week for 25 years. That would be about 1 million miles for 1419! seems ridiculous - have i done something wrong there? Link to post Share on other sites More sharing options...
Miss Prism Posted March 20, 2020 Share Posted March 20, 2020 That's 40k miles p.a. An express loco, and some of them did 2 million miles in a lifetime (say 30 years) works out to be approx 70k miles p.a., and we know express locos were usually in the shops for a boiler swap every 2 years or so. These figures are general of course, and I accept comparing an 0-4-2T and a big 4-6-0 is a bit chalk and cheese, but that's how I got to a wild guess of a 3-year boiler swap interval for the small loco. Someone educate me. Link to post Share on other sites More sharing options...
RMweb Premium Blobrick Posted March 20, 2020 RMweb Premium Share Posted March 20, 2020 Just received my 58xx in early black livery. First impressions is of a good model which captures the locomotive very well. Having build a springside version in the 80s, where the kit alone cost £150, l think this current model is excellent value, so well do Dapol. My only issue has been in my case when l opened the new packaging, l found a couple of the small black mounting screws rattling around the box. Looking at the model, it seems that these screws have chipped away small pieces of paint on the wheel sets and footplate edge. Not the end of the world as a quick touch in was all that was need to put things right. Unfortunately l noticed a mark/scratch on the LHS of the boiler next to the front of the side tank. As l was not intending to weather this model, it will be difficult to hide. As l mentioned l suspect that a rogue screw could be the culprit, but l would be very interested if anyone else finds a similar mark on their model, see photo attached? Bob C Link to post Share on other sites More sharing options...
coeurdelyon Posted March 20, 2020 Share Posted March 20, 2020 Hi, Actually 1426 covered 755,005 miles before being withdrawn and had 10 boiler exchanges during its lifetime of 39 years Best, Richard 1 1 Link to post Share on other sites More sharing options...
Miss Prism Posted March 20, 2020 Share Posted March 20, 2020 That's useful info. We now have some sort of crude measure to answer the perennial 'now you see it, now you don't' topfeed scenario. Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted March 20, 2020 RMweb Gold Share Posted March 20, 2020 1 hour ago, Blobrick said: Just received my 58xx in early black livery. First impressions is of a good model which captures the locomotive very well. Having build a springside version in the 80s, where the kit alone cost £150, l think this current model is excellent value, so well do Dapol. My only issue has been in my case when l opened the new packaging, l found a couple of the small black mounting screws rattling around the box. Looking at the model, it seems that these screws have chipped away small pieces of paint on the wheel sets and footplate edge. Not the end of the world as a quick touch in was all that was need to put things right. Unfortunately l noticed a mark/scratch on the LHS of the boiler next to the front of the side tank. As l was not intending to weather this model, it will be difficult to hide. As l mentioned l suspect that a rogue screw could be the culprit, but l would be very interested if anyone else finds a similar mark on their model, see photo attached? Bob C There are of course those that cannot but perhaps a good advert for supporting your local shop where you are able to inspect prior to purchase. I'm lucky in that I have Lord and Butler as my local emporium. Rob. 1 2 Link to post Share on other sites More sharing options...
RMweb Premium boxbrownie Posted March 20, 2020 RMweb Premium Share Posted March 20, 2020 2 hours ago, Blobrick said: Just received my 58xx in early black livery. First impressions is of a good model which captures the locomotive very well. Having build a springside version in the 80s, where the kit alone cost £150, l think this current model is excellent value, so well do Dapol. My only issue has been in my case when l opened the new packaging, l found a couple of the small black mounting screws rattling around the box. Looking at the model, it seems that these screws have chipped away small pieces of paint on the wheel sets and footplate edge. Not the end of the world as a quick touch in was all that was need to put things right. Unfortunately l noticed a mark/scratch on the LHS of the boiler next to the front of the side tank. As l was not intending to weather this model, it will be difficult to hide. As l mentioned l suspect that a rogue screw could be the culprit, but l would be very interested if anyone else finds a similar mark on their model, see photo attached? Bob C If your careful and very localised with a cotton bud and some T-Cut it should hide the worst of the scratch. Link to post Share on other sites More sharing options...
coeurdelyon Posted March 20, 2020 Share Posted March 20, 2020 Hi Miss Prism, I had a senior moment the lifespan of 1426 should be 29 years NOT 39 years - 1933 to 1962. Best, Richard Link to post Share on other sites More sharing options...
Miss Prism Posted March 20, 2020 Share Posted March 20, 2020 6 minutes ago, coeurdelyon said: I had a senior moment And an excellent one. 29/10 = nearly 3 years average between boiler swaps, assuming 1426 was class-typical. Link to post Share on other sites More sharing options...
RMweb Premium Blobrick Posted March 20, 2020 RMweb Premium Share Posted March 20, 2020 41 minutes ago, boxbrownie said: If your careful and very localised with a cotton bud and some T-Cut it should hide the worst of the scratch. I had thought of that but though that T-Cut would leave a polished finish?. TBH l ve already contacted the supplier and the model with be going back. Shame as this is a lovely model, l can't stop admiring it Bob C Link to post Share on other sites More sharing options...
RMweb Premium boxbrownie Posted March 20, 2020 RMweb Premium Share Posted March 20, 2020 3 minutes ago, Blobrick said: I had thought of that but though that T-Cut would leave a polished finish?. TBH l ve already contacted the supplier and the model with be going back. Shame as this is a lovely model, l can't stop admiring it Bob C I suppose it depends upon the finish already on the model, it looked like a satin gloss, but if more matt then something a little more coarse used very carefully? Link to post Share on other sites More sharing options...
RMweb Premium Blobrick Posted March 20, 2020 RMweb Premium Share Posted March 20, 2020 20 minutes ago, boxbrownie said: I suppose it depends upon the finish already on the model, it looked like a satin gloss, but if more matt then something a little more coarse used very carefully? Thanks, l appreciate the advice, l was in two minds just to touch up but TBH, l think l ll find more damage/scratches if l take a closer look in daylight tomorrow,so back it goes. I was just curious if anyone else had found similar damage? Bob C 1 Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted March 20, 2020 RMweb Premium Share Posted March 20, 2020 5 hours ago, coeurdelyon said: Hi, Actually 1426 covered 755,005 miles before being withdrawn and had 10 boiler exchanges during its lifetime of 39 years Best, Richard I thought my fag packet 1m number seemed a bit high. Is there a widely available data source for this stuff then? I've heard of "Peto" recording livery changes. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now