RMweb Gold PeterBB Posted July 5, 2019 RMweb Gold Share Posted July 5, 2019 Enjoy! 1 Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted July 7, 2019 RMweb Gold Share Posted July 7, 2019 Hi Andy you are still at it then. The rate you finish layouts you must be on piece work. I have been cutting down of RMweb as I has too much to do. After laying about 50sq metres of Paving we had problems with it so it is coming up and new going down plus there from needs paving too. It would be nice to get back to modelling. I am waiting for another steam layout from you I do enjoy seeing them. All the best Don 1 1 Link to post Share on other sites More sharing options...
Andrew P Posted July 12, 2019 Author Share Posted July 12, 2019 On 05/07/2019 at 10:08, PeterBB said: Enjoy! Thanks Peter, the object of the break was to lay Mum's Ashes with Dads at Exeter Crematorium, which we did on Tuesday, it was a very emotional day, but all went really well. The few days away did Dee and I good as well, and we were ready for a change of scene for a few days. 4 Link to post Share on other sites More sharing options...
Andrew P Posted July 12, 2019 Author Share Posted July 12, 2019 On 07/07/2019 at 17:56, Donw said: Hi Andy you are still at it then. The rate you finish layouts you must be on piece work. I have been cutting down of RMweb as I has too much to do. After laying about 50sq metres of Paving we had problems with it so it is coming up and new going down plus there from needs paving too. It would be nice to get back to modelling. I am waiting for another steam layout from you I do enjoy seeing them. All the best Don Hi Don, Good to hear your still at it, as it were, but not Modelling is BAD NEWS. Sounds bad enough laying the slabs once, but to have to lift it, and then do it again is a real pain. You do need some ME TIME, and get back to the Modelling. Re Steam Layouts, there won't be any for a while yet, I need to work on New Mills, my OO Project, and then get on with doing more to SMS over the coming weeks. 3 Link to post Share on other sites More sharing options...
Andrew P Posted August 2, 2019 Author Share Posted August 2, 2019 (edited) I spent a little time yesterday and today fitting the Paul Chetter / Zimo MX 696S, Sound Chip to my Heljan Class 40. Heljan are really helpful as all the wires are red and black, but it looks more complicated than it actually is, once you now where to put certain wires, and a call to Paul yesterday and David Jintyman today guided me in the right direction. With the Analog board and Roof Fan Motor removed, and the wires sorted and check for light functions, the new board can be added. This shows the completed job. The board comes in two halves, one with the screw terminals and the other the decoder and locating pins Once wired the two marry up to form the decoder. The Speaker I've selected was supplied by David / Jintyman of this Parish, and gives a nice warm sound, as will be heard once the short Video has been up loaded. Once done I could test the lights, I requested that the No 2 end lights be on a separate function for either off / pulling a Train, or on / Light Engine. The Video will be along soon. Edited August 2, 2019 by Andrew P add an S 12 Link to post Share on other sites More sharing options...
pwr Posted August 2, 2019 Share Posted August 2, 2019 Looking forward to that Andy! 1 1 Link to post Share on other sites More sharing options...
pwr Posted August 2, 2019 Share Posted August 2, 2019 And if you can include that 56 as well I shall be over the moon! Paul R 1 Link to post Share on other sites More sharing options...
Andrew P Posted August 2, 2019 Author Share Posted August 2, 2019 Whilst waiting for the Video, here are a few pics of another job from today on SMS. I painted the side of the Baseboard and then fitted some walling, I couldn't find any decent 7mm Walling that was narrow enough, so I've fitted large 4mm, and I think it looks O.K. Its only there to stop a wayward Wagons or Locos coming off the edge of the board. I can now get on and Ballast this section. 13 Link to post Share on other sites More sharing options...
Andrew P Posted August 2, 2019 Author Share Posted August 2, 2019 2 minutes ago, pwr said: And if you can include that 56 as well I shall be over the moon! Paul R I will do that later for you mate, no problem. 1 Link to post Share on other sites More sharing options...
Andrew P Posted August 2, 2019 Author Share Posted August 2, 2019 It's here folks. 10 Link to post Share on other sites More sharing options...
pwr Posted August 2, 2019 Share Posted August 2, 2019 Awesome Andy. Just awesome. I see from the lighting configuration its about to haul the Royal Train! Do you have a model of that! Ha ha! Paul R 3 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted August 2, 2019 RMweb Premium Share Posted August 2, 2019 2 hours ago, Andrew P said: I spent a little time yesterday and today fitting the Paul Chetter / Zimo MX 696S, Sound Chip to my Heljan Class 40. Heljan are really helpful as all the wires are red and black, but it looks more complicated than it actually is, once you now where to put certain wires, and a call to Paul yesterday and David Jintyman today guided me in the right direction. With the Analog board and Roof Fan Motor removed, and the wires sorted and check for light functions, the new board can be added. This shows the completed job. The board comes in two halves, one with the screw terminals and the other the decoder and locating pins Once wired the two marry up to form the decoder. The Speaker I've selected was supplied by David / Jintyman of this Parish, and giveS a nice warm sound, as will be heard once the short Video has been up loaded. Once done I could test the lights, I requested that the No 2 end lights be on a separate function for either off / pulling a Train, or on / Light Engine. The Video will be along soon. Cor Blimey, Andy The wiring inside that loco is as complicated as my control panel. 2 Link to post Share on other sites More sharing options...
D6775 Posted August 2, 2019 Share Posted August 2, 2019 I do rather like a 40, will be interested to see what this becomes. Al. 1 Link to post Share on other sites More sharing options...
Andrew P Posted August 2, 2019 Author Share Posted August 2, 2019 1 hour ago, pwr said: Awesome Andy. Just awesome. I see from the lighting configuration its about to haul the Royal Train! Do you have a model of that! Ha ha! Paul R Cheers Paul, Now that the covers are fitted it's Freight, I think????? I've done the 56 and it's up loading now, and then did the 47 and 37 mate. Link to post Share on other sites More sharing options...
Andrew P Posted August 2, 2019 Author Share Posted August 2, 2019 55 minutes ago, Clive Mortimore said: Cor Blimey, Andy The wiring inside that loco is as complicated as my control panel. Although I ticked AGREE Clive, I think you win hands down for excess wire on your panel, do you have shares in Wire For U? 2 Link to post Share on other sites More sharing options...
Andrew P Posted August 2, 2019 Author Share Posted August 2, 2019 13 minutes ago, D6775 said: I do rather like a 40, will be interested to see what this becomes. Al. Should be a beauty once numbered and weathered, I hope. Link to post Share on other sites More sharing options...
Andrew P Posted August 2, 2019 Author Share Posted August 2, 2019 3 hours ago, pwr said: And if you can include that 56 as well I shall be over the moon! Paul R Just for YOU Paul, and any others that might like it. 13 Link to post Share on other sites More sharing options...
georgeT Posted August 2, 2019 Share Posted August 2, 2019 Very nice sounds Buddy very realistic, prefer the short films... 1 1 Link to post Share on other sites More sharing options...
Andrew P Posted August 2, 2019 Author Share Posted August 2, 2019 3 minutes ago, georgeT said: Very nice sounds Buddy very realistic, prefer the short films... Cheers George, The short ones are less time consuming but difficult to judge quality, the next one with the 47 and 37 is about 4 minutes, so again, about 2 minutes for each Loco. Link to post Share on other sites More sharing options...
Andrew P Posted August 2, 2019 Author Share Posted August 2, 2019 This last Video's a bit longer, about 4 minutes, as we have the Heljan 47 with an ''OO'' Chip by South West Digital removed from a ''OO'' Loco a couple of years ago and so has to have one Motor removed. The same with the Heljan 37, but this time fitted with an ''OO'' Paul Chetter / Zimo Chip with active braking, I don't know why the lights are flickering in the Video as I never noticed them when filming. This Loco also has the No 2 end Lights on a separate function for pulling a Train with the Tail Lights off, or Light Engine with them working. Both Locos were Numbered and Sound fitted by David / Jintyman of this Parish, and weathered by me. 9 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted August 2, 2019 RMweb Premium Share Posted August 2, 2019 1 hour ago, georgeT said: Very nice sounds Buddy very realistic, prefer the short films... Hi George I see our mate is still using the G-Tap name, and from my understanding you are the G and T from the days of your band he use to hang about with. Anyhow as he is still using your name, is he paying you any royalties on this videos? My fees as your agent are 40% plus 35% if I have to do any transactions and further 15% to cover expenses. 3 Link to post Share on other sites More sharing options...
Andrew P Posted August 2, 2019 Author Share Posted August 2, 2019 8 minutes ago, Clive Mortimore said: Hi George I see our mate is still using the G-Tap name, and from my understanding you are the G and T from the days of your band he use to hang about with. Anyhow as he is still using your name, is he paying you any royalties on this videos? My fees as your agent are 40% plus 35% if I have to do any transactions and further 15% to cover expenses. He learnt all he knows from me, and is still in my debt, haha. 1 2 Link to post Share on other sites More sharing options...
sb67 Posted August 2, 2019 Share Posted August 2, 2019 Cracking videos Andy, close call which I prefer, the sounds on here or New Mills, tough choice! Steve. 1 1 1 Link to post Share on other sites More sharing options...
Andrew P Posted August 2, 2019 Author Share Posted August 2, 2019 4 minutes ago, sb67 said: Cracking videos Andy, close call which I prefer, the sounds on here or New Mills, tough choice! Steve. Always a close call, but most O Gauge has the bigger speakers so a nice deeper sound, the advantage with New Mills is scale length of run. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold MarshLane Posted August 2, 2019 RMweb Gold Share Posted August 2, 2019 1 hour ago, Andrew P said: I don't know why the lights are flickering in the Video as I never noticed them when filming. Hi Andy, If they are LEDs, then the camera is picking up the flicker of lights. LEDs switch on and off very rapidly, which the human eye doesn't see, but put a video camera on with a shutter speed above 1/60th of a second, and the Flickr will show up. Its the same problem that we have with trains on the National Network - the lights can appear to be all 'OFF' despite clearly seeing them when you hit the button! The downside is selecting a slower shutter speed will result in a blurier picture, although that might not be too big an issue at the speeds involved on model railways. Major problem on the big railway of course!! Rich 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now