RMweb Gold Popular Post Hattons Dave Posted November 5, 2019 Author RMweb Gold Popular Post Share Posted November 5, 2019 Hi guys, Project Genesis is now one month into production and we’re pleased to see so many people inspired by our new coaches. Your feedback has aided the design of the coaches, from our initial designs that were shown on the launch day. We have iterated through 5 evolving designs to reach a stage where we are happy that we have addressed all of the feedback received and are confident the product will be the most realistic coach we can make. These 2D drawings will now be turned into 3D CAD files that will show all of the details which we are putting into these coaches. This will take a couple of months but we will keep you informed as the project continues to develop. Full Brake Coaches One of the most requested features was the addition of Full Brake coaches to the range and we are very happy to reveal that these types of coaches are now available to pre-order, HERE. Full Brakes were popular during the time these coaches ran, as many passengers carried copious amounts of luggage when they travelled. Also, some goods could be transported on passenger trains if they were needed in a hurry, for example - newspapers or milk, so most trains would have had a full brake. As the vehicles were replaced in passenger service, the full brakes got a new lease of life with the engineers of the railway companies as tool or storage vans. This helped a lot of them to survive far longer than the passenger coaches, with one even lasting in service until the 1980s! LB&SCR Liveried Coaches Finally, one livery not included in the initial plan has been requested more than any, LB&SCR. This has also now been added and can be pre-ordered HERE, to run with the new Hornby Terrier or any of the other great LB&SCR locos available. These will be available as part of Batch 2. For more information about the full range of Genesis coaches and to pre-order, click HERE Cheers, Dave 30 3 Link to comment Share on other sites More sharing options...
Wickham Green Posted November 5, 2019 Share Posted November 5, 2019 Looking very impressive ................. but may I query the black windows on the B.R. riding van ? - if they were blanked out / sheeted over they'd be painted the same colour as the rest of the body. ( UNLESS these represent chalk boards - the absence of which nobody seems to have mentioned yet - very common on passenger brakes of all kinds / eras - though normally restricted to the waist panels.) 1 Link to comment Share on other sites More sharing options...
choo1choo Posted November 5, 2019 Share Posted November 5, 2019 Great news on the LBSCR liveries...I'm up for a couple of six wheel full brakes and a brace of six wheel passenger brakes ......should sit nicely with my other bodge...I mean remodelled six wheelers. Craig. 2 Link to comment Share on other sites More sharing options...
RMweb Premium Compound2632 Posted November 5, 2019 RMweb Premium Share Posted November 5, 2019 @Hattons Dave, have you widened the quarter-lights? Not possible to tell from the passenger brake vans! 1 Link to comment Share on other sites More sharing options...
gr.king Posted November 5, 2019 Share Posted November 5, 2019 Why are the prices for the "all one colour, unlined" liveries the same as the "two-colours plus contrasting upper beading and fine lining all round" versions which must be more expensive to produce? Link to comment Share on other sites More sharing options...
Hitchin Junction Posted November 5, 2019 Share Posted November 5, 2019 I think a "Grantham, Crawley and Downton Abbey Railway" livery would be a terrific seller. Blue Blood with gold trim. Tim 1 Link to comment Share on other sites More sharing options...
RMweb Premium Hilux5972 Posted November 6, 2019 RMweb Premium Share Posted November 6, 2019 6 hours ago, Hitchin Junction said: I think a "Grantham, Crawley and Downton Abbey Railway" livery would be a terrific seller. Blue Blood with gold trim. Tim The Downton train was actually made up of Teaks. 1 Link to comment Share on other sites More sharing options...
RMweb Gold PaulRhB Posted November 6, 2019 RMweb Gold Share Posted November 6, 2019 10 hours ago, gr.king said: Why are the prices for the "all one colour, unlined" liveries the same as the "two-colours plus contrasting upper beading and fine lining all round" versions which must be more expensive to produce? Hattons didn’t add extra for the P classes in ornate liveries over black so I guess their production process either adds minimal labour time for the subsequent colour prints or they have decided to spread the costs over the whole production to balance the prices. 2 5 Link to comment Share on other sites More sharing options...
HonestTom Posted November 6, 2019 Share Posted November 6, 2019 Well, there go all my theories about why they weren't doing LBSC colours. It's great to see Hattons taking feedback on board, and I'm pretty sure I can make space for a BR engineering full brake somewhere. 3 Link to comment Share on other sites More sharing options...
truffy Posted November 6, 2019 Share Posted November 6, 2019 I can’t justify the SR coaches for my time period. But tool and full brakes are definitely interesting Link to comment Share on other sites More sharing options...
RMweb Premium Footy Posted November 6, 2019 RMweb Premium Share Posted November 6, 2019 Full marks to Hattons for listening and responding to their customers by adding new liveries. Trouble is the list could get very long and very expensive for us pre-grouping fans. In that regard how about the Cambrian, Taff Vale, Rhymney, Barry, Brecon and Merthyr? A logical extension - for me at least! - would then be to go 7mm scale, 'coz thanks to Minerva there are, with a little enjoyable modelling to modify them, RTR locos ready and waiting to pull them. Link to comment Share on other sites More sharing options...
RMweb Gold Oldddudders Posted November 6, 2019 RMweb Gold Share Posted November 6, 2019 9 minutes ago, Footy said: A logical extension - for me at least! - would then be to go 7mm scale, 'coz thanks to Minerva there are, with a little enjoyable modelling to modify them, RTR locos ready and waiting to pull them. Success breeds success. Hatton's are not unsupportive to 7mm Scale, so if they find the rewards on the OO version are sufficient, they will cast an eye to that, I'm sure. Volume of sales will always be less, though, probably meaning a 7mm offering would be less broad. Bigger railways only, I imagine. 1 Link to comment Share on other sites More sharing options...
HonestTom Posted November 6, 2019 Share Posted November 6, 2019 16 minutes ago, Footy said: Full marks to Hattons for listening and responding to their customers by adding new liveries. Trouble is the list could get very long and very expensive for us pre-grouping fans. In that regard how about the Cambrian, Taff Vale, Rhymney, Barry, Brecon and Merthyr? I think the argument for the liveries they've chosen is that they all have or will soon have appropriate RTR locomotives. That being said, through workings were not unknown, so you could maybe justify some Welsh companies on a GWR or LNWR layout. 1 Link to comment Share on other sites More sharing options...
RMweb Premium Compound2632 Posted November 6, 2019 RMweb Premium Share Posted November 6, 2019 45 minutes ago, HonestTom said: That being said, through workings were not unknown, so you could maybe justify some Welsh companies on a GWR or LNWR layout. As a general rule (to which I have no doubt there are a multitude of exceptions) through carriages were from the larger company to the smaller, e.g. LNWR Euston-Aberystwyth over the Cambrian, or Midland Nottingham/Derby-Southampton over the M&SWJ. 1 Link to comment Share on other sites More sharing options...
JSpencer Posted November 6, 2019 Share Posted November 6, 2019 (edited) I said "stop spoiling us"! Nice one Hattons. Edited November 6, 2019 by JSpencer 1 2 Link to comment Share on other sites More sharing options...
wombatofludham Posted November 6, 2019 Share Posted November 6, 2019 2 hours ago, Compound2632 said: As a general rule (to which I have no doubt there are a multitude of exceptions) through carriages were from the larger company to the smaller, e.g. LNWR Euston-Aberystwyth over the Cambrian, or Midland Nottingham/Derby-Southampton over the M&SWJ. The Cambrian Railway built some bogie tri-composites of their own specifically to work through coaches to Euston, Liverpool and Manchester, some of the few coaches that the GWR kept on grouping. They ran to both Aberystwyth and up the coast. They were non corridor but lavatory equipped. Obviously being bogie they are not particularly relevant to this thread but there is a retouched early photo of one in CC Green's "Cambrian Railways Album" which shows one in Euston, and a photo of one in Barmouth. Interestingly the bogie tri-composites were built in 1898, a year before the last six-wheel coaches were built by the Cambrian which might explain how the six wheelers managed to hang on into the early 1930s on the Cambrian lines. Personally I'd love some Cambrian six wheelers but the chances of us getting an RTR Sharp Stewart Furness/Cambrian 4-4-0 to haul them with are slim to Buckley's I suspect. There again, if someone decides to do a Metropolitan Railway condensing tank engine, the Cambrian did buy some of those after they were sold off! 2 1 Link to comment Share on other sites More sharing options...
RMweb Premium Compound2632 Posted November 6, 2019 RMweb Premium Share Posted November 6, 2019 8 minutes ago, wombatofludham said: The Cambrian Railway built some bogie tri-composites of their own specifically to work through coaches to Euston, Liverpool and Manchester, some of the few coaches that the GWR kept on grouping. They ran to both Aberystwyth and up the coast. They were non corridor but lavatory equipped. Obviously being bogie they are not particularly relevant to this thread but there is a retouched early photo of one in CC Green's "Cambrian Railways Album" which shows one in Euston, and a photo of one in Barmouth. Interestingly the bogie tri-composites were built in 1898, a year before the last six-wheel coaches were built by the Cambrian which might explain how the six wheelers managed to hang on into the early 1930s on the Cambrian lines. Personally I'd love some Cambrian six wheelers but the chances of us getting an RTR Sharp Stewart Furness/Cambrian 4-4-0 to haul them with are slim to Buckley's I suspect. There again, if someone decides to do a Metropolitan Railway condensing tank engine, the Cambrian did buy some of those after they were sold off! I stand corrected; I was remembering a photo which on inspection turns out to have a roof-board reading "London (Euston) Llandrindod Wells & Central Wales" - a LNWR 50 ft cove-roof tricomposite corridor brake to D214 [D. Jenkinson, LNWR Carriages (2e, Pendragon, 1995) plate 88]. But I can vouch for the Midland through carriage to Southampton; it's in the 1910 North & West carriage marshalling book in the collection of the Midland Railway Study Centre. I would have thought those Sharp, Stewart 4-4-0s are about as close to a "generic" 19th century locomotive as you're going to get! Link to comment Share on other sites More sharing options...
Joseph the L&YR lover Posted November 6, 2019 Share Posted November 6, 2019 (edited) 1 hour ago, wombatofludham said: RTR Sharp Stewart Furness/Cambrian 4-4-0 to haul them with are slim to Buckley's I suspect. They aren't ready to run but there are some body shells for loco's like that on Shapeways. But I'd try to get them directly from @Knuckles as Shapeways' pricing is pretty bad. https://www.shapeways.com/shops/sparkshotcustomcreationsscc?section=4mm+Furness+%26+Cambrian+Loco'+Bodies&s=0 Edited November 6, 2019 by Joseph the L&YR lover Link to comment Share on other sites More sharing options...
wombatofludham Posted November 6, 2019 Share Posted November 6, 2019 (edited) 14 minutes ago, Compound2632 said: I stand corrected; I was remembering a photo which on inspection turns out to have a roof-board reading "London (Euston) Llandrindod Wells & Central Wales" - a LNWR 50 ft cove-roof tricomposite corridor brake to D214 [D. Jenkinson, LNWR Carriages (2e, Pendragon, 1995) plate 88]. But I can vouch for the Midland through carriage to Southampton; it's in the 1910 North & West carriage marshalling book in the collection of the Midland Railway Study Centre. I would have thought those Sharp, Stewart 4-4-0s are about as close to a "generic" 19th century locomotive as you're going to get! I remember seeing that photo but of course the Central Wales line was LNWR/LMS. There were through services to Swansea via Stafford, Shrewsbury, Llandrindod and every garden gate to Swansea. They even had a "tea car" (buffet). I'd imagine only a masochist or someone like me who has an aversion to copper clad mobile Edwardian tea urns would choose to go to Swansea from Euston by such a route but they did run right up until the 1950s. You could also reach Porthmadog (or Portmadoc as it was) by the LMS in through coaches off the "Welshman", which were worked from Bangor via Caernarfon and Afon Wen. This was due to the section from Afon Wen to Porthmadog having been built by the Caernarvonshire Railway which later became part of the LNWR on behalf of the Cambrian for which they were given running rights. I don't think any LNWR/LMS locos made it to Porthmadog in regular service pre nationalisation but through coaches were advertised by the LMR into the 1950s, and I expect despite the round the houses routing via Crewe probably offered a competitive journey time to the GWR "Cambrian Coast Express" where the coast line portion had to trundle all round the coast from Dyfi Junction. Edited November 6, 2019 by wombatofludham 1 Link to comment Share on other sites More sharing options...
RMweb Premium Hal Nail Posted November 6, 2019 RMweb Premium Share Posted November 6, 2019 5 hours ago, Footy said: A logical extension - for me at least! - would then be to go 7mm scale 4 hours ago, Oldddudders said: Volume of sales will always be less A bit off topic but Dapol have already announced 7mm Stroudley 4 wheelers which would possibly deter anyone else from coming to the party. 1 Link to comment Share on other sites More sharing options...
truffy Posted November 6, 2019 Share Posted November 6, 2019 6 minutes ago, Hal Nail said: A bit off topic but Dapol have already announced 7mm Stroudley 4 wheelers which would possibly deter anyone else from coming to the party. A bit more limited in geographic applicability though? Link to comment Share on other sites More sharing options...
jamespetts Posted November 6, 2019 Share Posted November 6, 2019 The full brakes will be excellent; some in S. R. green will be useful in my planned 1930s Southern layout. But no Stroudly LBSC livery to go with the early Terriers? 1 Link to comment Share on other sites More sharing options...
Joseph the L&YR lover Posted November 6, 2019 Share Posted November 6, 2019 4 minutes ago, jamespetts said: The full brakes will be excellent; some in S. R. green will be useful in my planned 1930s Southern layout. But no Stroudly LBSC livery to go with the early Terriers? Just announced they are adding those to the second batch. 1 1 Link to comment Share on other sites More sharing options...
GreenGiraffe22 Posted November 6, 2019 Share Posted November 6, 2019 Now I'm starting to think the lack of LBSCR livery announcement was just for fun to get everyone speculating, have we all just been trolled? :p 5 Link to comment Share on other sites More sharing options...
jamespetts Posted November 6, 2019 Share Posted November 6, 2019 17 minutes ago, Joseph the L&YR lover said: Just announced they are adding those to the second batch. No, that is the Marsh umber, not the Stroudly teak livery. They are quite different: the Marsh livery is a 20th century livery. 1 Link to comment Share on other sites More sharing options...
Recommended Posts