Earl Bathurst Posted October 5, 2014 Share Posted October 5, 2014 Good evening. I have just started out in 0 gauge moving up from 00. I am itching to build a kit and was woundering if anyone can offer some advice. I have had a look at David Andrew kits and would like to build the 42xx/52xx. Any idea if these kits are very difficult to build as it will be my first kit loco to build? Thanks Scott Link to comment Share on other sites More sharing options...
BrushType4 Posted October 5, 2014 Share Posted October 5, 2014 Have you built a brass kit before? Link to comment Share on other sites More sharing options...
Jeff Smith Posted October 5, 2014 Share Posted October 5, 2014 7mm kits should be easier than 4mm as the parts are bigger, however this means longer solder joints and perhaps a more powerful iron. If you have no experience of brass kits I would suggest trying a wagon first. Link to comment Share on other sites More sharing options...
N15class Posted October 6, 2014 Share Posted October 6, 2014 If you are a beginner at kit building I would as suggested above go for a wagon kit. Connoisseur Models are a good starting place. I think you would need a couple of locos under your belt before starting the 42/52. It is a lot of money to put into the cupboard without finishing. Link to comment Share on other sites More sharing options...
Earl Bathurst Posted October 6, 2014 Author Share Posted October 6, 2014 Soldering is not a problem as I have built brass kits in 4mm. Thanks for the advise. Also does anyone produce a 14xx kit? Link to comment Share on other sites More sharing options...
RMweb Premium Mike Bellamy Posted October 6, 2014 RMweb Premium Share Posted October 6, 2014 Also does anyone produce a 14xx kit? Looks like you need to join the Gauge O Guild - they have a comprehensive search facility on their website which shows that 14XX (whatever that is!) is listed against the following manufacturers Mercian Scorpio Slaters Springside Warren Shephard Edit - missed the g out of Springside ! . Link to comment Share on other sites More sharing options...
Adrian Posted October 6, 2014 Share Posted October 6, 2014 Modern Outline Kits also do a very nice 14xx http://www.modernoutline.co.uk/modern_outline_007.htm Link to comment Share on other sites More sharing options...
RMweb Premium Mike Bellamy Posted October 6, 2014 RMweb Premium Share Posted October 6, 2014 Modern Outline Kits also do a very nice 14xx http://www.modernoutline.co.uk/modern_outline_007.htm Thanks Adrian - I wonder why that didn't show in my GOG search . . ? . Link to comment Share on other sites More sharing options...
daifly Posted October 6, 2014 Share Posted October 6, 2014 Thanks Adrian - I wonder why that didn't show in my GOG search . . ? . It will be because you searched on 14xx and not 48xx! Which just goes to show how difficult it is to construct a database in the first place using consistent data input and how open-minded you have to be when searching! Had you searched on 48xx you would only have found MOK and Scorpio! Dave Link to comment Share on other sites More sharing options...
Ken Anderson Posted October 6, 2014 Share Posted October 6, 2014 Yes, join the Guild. There is a wealth of information and knowledge there. Link to comment Share on other sites More sharing options...
hartleymartin Posted October 6, 2014 Share Posted October 6, 2014 It depends what you mean by "beginner." The Tower Models Andrew Barclay kit is about as "beginner" as you can get in this scale. It is a "glue-n-screw" kit. If you're starting out in O scale, I would suggest building a couple of wagons and a brake van first. Helps you to get your head around how things are slightly different from 4mm scale. Link to comment Share on other sites More sharing options...
The Nth Degree Posted October 6, 2014 Share Posted October 6, 2014 However, despite the sage advice above, to answer your question David Andrews kits are very well designed, and especially MOK kits. Both have entirely different construction methods. Link to comment Share on other sites More sharing options...
ianwales Posted October 6, 2014 Share Posted October 6, 2014 Hi Scott I got chatting to one of the guys on the loco clinic/82G stand at Telford and he suggested for a GW loco one of the ABS/Zero Zephyr 57xx panniers as a good beginners kit, I am going to have a go at either one of those or a Springside 94xx Ian Link to comment Share on other sites More sharing options...
N15class Posted October 6, 2014 Share Posted October 6, 2014 Hi Scott I got chatting to one of the guys on the loco clinic/82G stand at Telford and he suggested for a GW loco one of the ABS/Zero Zephyr 57xx panniers as a good beginners kit, I am going to have a go at either one of those or a Springside 94xx Ian Springside are not the best kits in the world. One from Jim at Connoisseur Models would be a better choice. ABS have the advantage of a resin casting for the hard part. Link to comment Share on other sites More sharing options...
LaScala Posted October 6, 2014 Share Posted October 6, 2014 Springside are not the best kits in the world. One from Jim at Connoisseur Models would be a better choice. ABS have the advantage of a resin casting for the hard part. Yes, steer away from Springside. Full whitemetal is passe as a medium. A good model can be built but their wheels may need repacing due to eccentricity. The weight tends to mean half the power is lost shifting itself before you add a load. Tower took ages to sell off their stock at reduced prices a couple of years ago. Good luck with finding a Zero Zephyr kit. I don't think ABS actually make any, or anything else these days. They are good despite their age and certainly look the part. The resin tanks are very convincing and save much time. Link to comment Share on other sites More sharing options...
ianwales Posted October 6, 2014 Share Posted October 6, 2014 Springside are not the best kits in the world. One from Jim at Connoisseur Models would be a better choice. ABS have the advantage of a resin casting for the hard part. Only problem with a Connoisseur kit is that Jim doesn't do anything GW! Ian Link to comment Share on other sites More sharing options...
N15class Posted October 6, 2014 Share Posted October 6, 2014 Only problem with a Connoisseur kit is that Jim doesn't do anything GW! Ian True, But it is better to start on something that can be finished even if it not from the chosen railway than one that destined to spend its life in a box unfinished. You will need to pick very carefully if it so necessary to have one of those odd engines. There are some really horrid ones out there. Link to comment Share on other sites More sharing options...
BrushType4 Posted October 6, 2014 Share Posted October 6, 2014 Only problem with a Connoisseur kit is that Jim doesn't do anything GW! Ian I rather thought that was a positive Link to comment Share on other sites More sharing options...
Simond Posted October 7, 2014 Share Posted October 7, 2014 Whilst accepting that full white metal is a bit passe, I've built a Springside 48xx and a Hall. I had to seriously revise the suspension on the 48, and getting the cab straight in the Hall, without soldering the firebox to it and the footplate (to allow for subsequent painting) was a mare, but that might just have been me. For some reason the Slaters' tender wheels were supplied with spigotted screws, to run in outside bearings, and these were truly awful. I replaced them with MF pattern wheels and axles, and used the original ones in an inside framed tender with conventional screws. These relatively minor grumbles aside, I was pleased with both locos. The Hall in particular is great - runs beautifully, (I did equalise the front two axles) and pulls very satisfactorily. Nothing wrong with a bit of weight! I strongly advise to solder them together. Powerflow and 70C. I certainly would not write off Springside. Best Simon Link to comment Share on other sites More sharing options...
ianwales Posted October 7, 2014 Share Posted October 7, 2014 True, But it is better to start on something that can be finished even if it not from the chosen railway than one that destined to spend its life in a box unfinished. Hi Peter I appreciate what you are saying, but, as I only have a limited budget to spend on my layout to buy something that doesn't fit in with the layout scheme wouldn't be of interest and therefore likely to sit in the cupboard unstarted. My current plan is to buy a Springside Hall without its tender(I already have a built up 4000Gall typre) and have the running chassis built for me leaving me to complete the bodywork. Ian Link to comment Share on other sites More sharing options...
BrushType4 Posted October 7, 2014 Share Posted October 7, 2014 Hi Peter I appreciate what you are saying, but, as I only have a limited budget to spend on my layout to buy something that doesn't fit in with the layout scheme wouldn't be of interest and therefore likely to sit in the cupboard unstarted. Ian Ian, build it, and eBay it. You'll make money even if you #*!! it up. Link to comment Share on other sites More sharing options...
daifly Posted October 9, 2014 Share Posted October 9, 2014 Good luck with finding a Zero Zephyr kit. I don't think ABS actually make any, or anything else these days. They are good despite their age and certainly look the part. The resin tanks are very convincing and save much time.Adrian Swain attends a limited number of shows each year and has a limited number of ZZ kits with him. I bought a Deeley Dock Tank from him at Telford last month - one of several different loco kits that he had brought.Dave Link to comment Share on other sites More sharing options...
81A Oldoak Posted October 9, 2014 Share Posted October 9, 2014 Whilst accepting that full white metal is a bit passe, I've built a Springside 48xx and a Hall. I had to seriously revise the suspension on the 48, and getting the cab straight in the Hall, without soldering the firebox to it and the footplate (to allow for subsequent painting) was a mare, but that might just have been me. For some reason the Slaters' tender wheels were supplied with spigotted screws, to run in outside bearings, and these were truly awful. I replaced them with MF pattern wheels and axles, and used the original ones in an inside framed tender with conventional screws. These relatively minor grumbles aside, I was pleased with both locos. The Hall in particular is great - runs beautifully, (I did equalise the front two axles) and pulls very satisfactorily. Nothing wrong with a bit of weight! I strongly advise to solder them together. Powerflow and 70C. I certainly would not write off Springside. Best Simon I think the later Springside kits such as the Manor and Hall are better than the earlier ones. The 94xx 0-6-0PT is rather long in the tooth and looks it. Link to comment Share on other sites More sharing options...
LaScala Posted October 9, 2014 Share Posted October 9, 2014 Adrian Swain attends a limited number of shows each year and has a limited number of ZZ kits with him. I bought a Deeley Dock Tank from him at Telford last month - one of several different loco kits that he had brought. Dave I have PM'ed Adrian twice about what he has left to no avail. Telford is not a realistic option for me as I'm in Brisbane! They never seem to come up on auction sites. Link to comment Share on other sites More sharing options...
daifly Posted October 9, 2014 Share Posted October 9, 2014 I have PM'ed Adrian twice about what he has left to no avail. Telford is not a realistic option for me as I'm in Brisbane! They never seem to come up on auction sites. Many of the ZZ kits were originally Eric Underhill kits so keep an eye out for those too. If you want to phone Adrian, I've had most success early evening UK time which I appreciate is not the most convenient time of day for you. Adrian is not a fan of email/PM as you will have noted from the lack of response. Good luck! Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.