Jump to content
 

trevora

Members
 View Profile  See their activity

  • Posts

    109

  • Joined

  • Last visited

 Content Type 

Everything posted by trevora

  1. trevora
    thats the software version
  2. trevora
    sprog would be less hassle and could be cheaper than replacing the zimos
  3. trevora
    why not keep both bits of great kit But use MXULF to program , can update zimo decoders for latest inproments (eg braking) Or sprog not so much money but no updates to zimo firmware
  4. trevora
    Ordered zimo decoder with sound loaded 20 hours later here in devon great service
  5. trevora
    https://wiki.3rail.nl/index.php?title=Märklin_Drum_Collector_Motor_(DCM) would convert motor to dc
  6. trevora
    That would work out at about 10kwh per day which my 4kw (2 east + 2 west faceing) is doing this month /more in summer less in winter in north devon
  7. trevora
    http://www.zimo.at/web2010/index.html
  8. trevora
    But often the banker was a spamcan as well
  9. trevora
    something like this https://www.wizardmodels.ltd/shop/locomotive/mt177/
  10. trevora
    This is one way for sale on ebay
  11. trevora
    Not tried but can you / how to break consist on the fly that would work just did not know what damage the motor acting as dynamo would do
  12. trevora
    Sorry if this is long winded but two questions in one I am thinking of motorising a gwr slip coach I would like it to run pulled by the train Until it nears the station then power from its motor to run (coasting) Into the platform If I use geared motor/power train it will not freewheel So could I belt drive straight from motor to axel And would the motor then feed power back into the decoder Like back EMF but all the time its part of the train Trevora
  13. trevora
    Zimo MX63820.5x15.5x4mm 1.2A continuous / 2.5A peak Stay-Alive via LifeLink/SACC16 if model provides connections 6 Functions 21pin MTC direct plug-in version£20 ECONOMY £20.00 MX638D21pin why not use this works with anything for a couple of quid more
  14. trevora
    No if decoder has no + & - pads change it Youchoos web site has how to's with sound but can do same less speaker Trevora
  15. trevora
    Thats what I make mine trevora
  16. trevora
    You can get these DT0605RW 20pc Pre-soldered litz wired leads Bi-color RED/WHITE SMD Led 0605 DUAL about 1 to 2 mm square
  17. trevora
    Look here to see about sensors https://model-railroad-hobbyist.com/node/34392
  18. trevora
    you can use any voltage tranformer / power supply and you should / must reduce current by adding resistors max current lest than 20ma per led look here http://led.linear1.org/1led.wiz to work out size required
  19. trevora
  20. trevora
    Could be grit in the hole in the cone shaped inlet worth turning the water off and opening it up
  21. trevora
  22. trevora
    If / when the joiners become loose you lose the feed
  23. trevora
    http://ledcalc.com/ will allow you to work it out
  24. trevora
    you have insulated rail joiners (fishplates) between each section of track (zones) trevora
  25. trevora
    something like this trevora
×
×
  • Create New...