trevora

Youchoos has them at £20.00 if you emailed him now there is a chance he would get it to you been helpful to me trevora

ZTC says Extended Lenz X-Bus protocol is used Trevora

https://www.ebay.de/itm/Tran-CT-ELEKTRONIK-Handregler-HR3-mit-grafikfahigem-LCD-E11291/223473601895?hash=item3408108d67:g:yrEAAOSw2fRcHLy6 there are more on ebay.DE trevora

Or TAMS Function decoder FD-R Basic 2 Article No .: 42-0116x Small function decoder with 3 outputs, eg for switching the light change and the interior lighting of control cars RailCom transmitter for retrofitting older digital vehicles without feedback via RailCom 2 outputs with max. 300 mA, 1 output with max. 100mA Formats: DCC, Motorola, RailCom Trevora

Uhlenbrock 68320 RailCom Transmitter Every vehicle that is to be used in automatic operation or is to report its address is fitted with a RailCom® transmitter. The transmitter is installed in addition to the locomotive decoder that is installed in the locomotive and is simply connected with power pickups of the locomotive. It can be programmed with all short or long addresses just like a DCC decoder. Additionally it is possible to connect a LISSY mini‐transmitter module. The RailCom signal can be utilised by a variety of systems including the Uhlenbrock MarCo receivers as well as Roco Z21, Lenz and ESU About a £10.00 @A&H maybe other places too trevora

I do not think it will hurt it but those outputs will not work see posts about dapols class 68's esu have logic level outputs (as dose the mx644c) and the board you list has transitors to boast the signal to drive leds

are you using a MX644 C or D that would be ok with the C you need ESU51967 for the D trevora

On ZIMO decoders at least you can set left / right or both rails to suit what you need trevora

Only one side on daytime the other night time trevora

The Blue is NOT used white and yellow one side track the other (red or black not both) trevora

when banking would it have the rear red only or white head light as well AS when it dropped back from the train it would need headlight? Then on the run back down the hill would it stop and swap lights Or like shunters show red and white at each end trevora

https://www.ebay.co.uk/itm/2mm-FLASHING-RED-TOWER-DIFFUSED-LEDs-x-10/151651613918?epid=938603595&hash=item234f23fcde:g:xf4AAOSwpDdVLqB~ Have used this man in uk trevora

For what ?. different locos different decoders what scale? steam / diesel ? sound? trevora

talk to kevin at coastal trevora

MX634 Family H0-Decoder, with large processor (as MX63)and energy storage circuitry TYPICAL APPLICATON: HO and (smaller) O gauge. trevora from zimo web site

Was it a V4 or a select as i do not think there are any uk select sounds and V4 sound file will not load on a select trevora

you can wire both points to one output on the ls150/100's Or give both outputs the same address trevora

CV 21= 0 Extra Functions Green and Purple wire = 3 acording to the TCS website trevora

Zimo & esu do none sound decoder that will do the shuffle trevora

Departmentals forum have posted Two Motorail vans 96608 and 96609 Are these the same ,they look yellow not colas orange as above or is it the light trevora