Jump to content
 

Geoff Cook

Members
 View Profile  See their activity

  • Posts

    1,792

  • Joined

 Content Type 

Everything posted by Geoff Cook

  1. Geoff Cook
    The 0.4mm packing that I referred to goes under part that fits between the switch rail and the stock rail under 3pl and 4pl on a b switch, that diagonal line on the drawing is the fret Geoff
  2. Geoff Cook
    You need to look at this RH%20Switches.pdf Each of those chairs is made from several components the above pdf gives the numbers that corresponds to those on the sprue, RH%20Switches.pdf If you are not using a turnout kit and don't have a ready made switch you need to pack two of the chairs with 0.4mm plasticard to replace the fret LH Switches.pdf
  3. Geoff Cook
    Hope you haven't stuck them down yet, because some of the chairs are wrong on timber 24 Keys need to be other side off rail and also face away from rail join Geoff
  4. Geoff Cook
    Correct, their are 2 switches on your tortoise
  5. Geoff Cook
    Looks as thow the turnouts are part of a crossover, therefore you can us one turnout motor to switch 2 common crossings Geoff
  6. Geoff Cook
    I had to change to the photo card licence when I reached 70 last year but my paper licence was pink not green, the only problem I had was at a chemists when they wanted proof so that I could get my prescription, non of the staff had seen a paper licence before. Geoff
  7. Geoff Cook
    Hmm never asked that question, I just followed what was done by others, and on some literature I had . I suppose the main reason was to give two smooth sides Geoff
  8. Geoff Cook
    Damian You need to use two layers of bendy mdf glued together for it to hold its shape, the toothed sides going together Geoff
  9. Geoff Cook
    Like you doing cornish cream scones with cheese scones Geoff
  10. Geoff Cook
    If you are getting slop in the dowels then they are being fitted incorrectly, the outside face of the dowels should be perfectly flush with the face of the timber and the screws used to hold them should not protrude forward of the face of the dowel. Geoff
  11. Geoff Cook
    From previous experience Grey is his favourite colour, changing to white would be a major change and require a debate
  12. Geoff Cook
    Chris How are the heel of the blades going to be anchored, pcb sleeper or ? Geoff
  13. Geoff Cook
    Chris should be used to that problem, or at least others moaning at him for leaving screws protruding when they have been used as anchors for the scenics Geoff
  14. Geoff Cook
    A grommet is a very small tube that's inserted into your child's ear during surgery. It can help drain away fluid in the middle ear and maintain air pressure.
  15. Geoff Cook
    You don't have to fight to do slips any longer, in the latest version Geoff
  16. Geoff Cook
    The C&L templates show more because they don't make the special slide chairs so they are using the standard slide chairs instead unless you model 4mm and use the exactoscale components Geoff
  17. Geoff Cook
    The number of slide chairs is dependant on what type of switch it is not the angle of the crossing eg A switch has 5, B switch has 6 and C switch has 7 all plus the special slide chairs Geoff
  18. Geoff Cook
    A bit like a Western then with loose top, good anti theft device Geoff
  19. Geoff Cook
    With all the surrounding ground area being white it would be very suited to a layout that handles China clay
  20. Geoff Cook
    Mark Are you setting the height of the building such that their is a 6" (2mm) step at the bottom of the single leaf door and a ramp for the roller shutter door to prevent water ingress from the yard Geoff
  21. Geoff Cook
    My copies only arrived today, I think the cart horse has brought it Geoff
  22. Geoff Cook
    Doesn't everybody Geoff
  23. Geoff Cook
    Muscles forgot how to run 20 years ago Geoff
  24. Geoff Cook
    Oh is it this weekend, I am going to have to get up early, go bed late, drink too much and suffer pain Trainers ? Geoff
  25. Geoff Cook
    I read last wednesday/ thursday that he had, had an haircut, needs his money back Geoff
×
×
  • Create New...