meatloaf

TMC have some of the latest ones in both standard and sound fitted

Cuts out on startup and none working flange squeal and cold start. All seem fixed on the loch lomond i got this week

Yellow one appeared on Facebook - for £450 🤣

its a known bug with the decoder as the power bank has to charge first. Im sure if you contact accurascale they can sort it for you

Picked up a preowned 57XX fitted with unknown sound. Reading CV7 gives a result of 81 and CV8 gives a result of 151 so looks like a loksound. Is there a way to asscertain which loksound versinon it is and whose sound file it has on it?

The last batch are on the sea.

If youre getting no sound at all check the speaker is plugged in the right way round. Should have the generic steam sound installed from new.

I have a prodigy and dont have any issues but it does take a few seconds to respond to a command such as lights on or direction change.

Class 20 is Q2 2024 according to Hornby when i emailled to ask about it.

Well i knew he wouldnt be happy with a 3 pole motor. But i agree with his comments about very slow running, Even on DCC i couldnt get a decent slow start. I also agree with hos comments about getting the tender body off - i said earlier in the thread it was a faff. Interesting he didnt mention the handrails not reaching the cab roof as it looks like the ones on his didnt

Looks like the n gauge J94 due next week. Wouldve got one but another £40 for the decoder means ill have to wait to see if it hits the bargain bins

For the none sound version it should be possible to remap the functions so you can use the lower numbers.

That could explain it 🫣

I just put the decoder in without altering the switches and all the lights work on mine ( prodigy Express 2 ) For F18 press shift then 18 F19 shift 19 F20 shift 20 etc

I got a decoder after they went back on sale. F8 does nothing on mine. No cold start or flange squeal.

the prodigy express goes up to F28. Or at least mine does :)

My 7800 just arrived from TMC. Thankfully the combo of TMCs packing and the big loco box meant the loco got to me intact despite the best efforts of the DPD driver after dropping it twice. Fitted a Dapol imperium decoder as its the only one i had to hand. Firebox glow works well and the loco runs nice with it installed. I did find it a bit of a faff getting the tender body off tho as there seems to be pipework attached to both the body and the chassis so in the end i just lifted the body up enough to get to the DCC socket without removing it completley. The manual only mentions the 4 screws so might be worth bearing in mind not to yank at the tender top to remove it EDIT : Just took it off the track to put it on the program track and it ran by itself in my hand for a few seconds. Im guessing this is the stay alive discharging.

I think mine did when i gave it a quick test before putting the decoder in

i saw an unboxing video on youtube and there was a rails with compliments card in the box so they are being sent out.

TMC have loads of manors in stock - both DCC Sound and DCC Ready in both GWR and BR Late Green livery

What are the folk who got the DCC ready version using with regards to decoders? As its not got a load of lights im assuming any decent decoder will be fine?

Personally im think the suprise item is going to be a new smaller train set containing a green 08 with a few wagons ready before xmas.

Does anyone know the ETA of the non sound decoder?

Ive been after a J15 and i dont see them on the Hornby site. Cant really find anywhere with them but i di remember them being very cheap a while back

I think it has to be an ESU decoder to work.