89A

The Bachmann 94xx is excellent, up to date detail sound ready / fitted. The 64xx isn't far behind. Perhaps Bachman have a trick up their sleeve as per the 37. That said I'll definitely be getting a few of these beauties sound fitted.

Have Bachmann stopped selling Dynamis?

We followed this down by car becoming more and more worried watching events unfold as we had booked for the return. Stayed overnight at Plymouth and the following day had the most memorable return run with Hinton Manor and Hagley Hall. Thanks for all the efforts.

On the overhead warning flash supplied it states that you must check the position of the sliding switches on the PCB depending on how you will be operating your loco. Can I assume that factory fitted sound locos have the switches set ready for an ESU sound decoder?

Tried to purchase 2 from Accurascale today. Keep getting blocked by something called Revolut which does not respond to my details. I've purchased quite a lot directly from Accurascale and never had so much trouble. Any help welcome.

That's what I suspect but would appreciate any confirmation. No information in the supplied instructions.

Picked up from another forum that slightly loosening the 2 screws either side of the wheels on the cab ends improves free running particularly over points and curves. I have tried that and there is a definite improvement but still get slight hesitancy at times. The screws are extremely tight.

I have 2 and both are the same. I've fitted 18 pin decoders and F0 needs to be on together with F1 for no 1 end lights and cab lights and F2 for no 2 end. Not found any combination that puts the interior lights on. I have only used a 4 function decoder however.

I'm not sure the G2as could be turned at Merthyr. This classic image of an Abergavenny train about to depart from Merthyr Tydfil shows the tender back cab fitted to many of Abergavenny's allocation due to the need to travel tender first.

I've edited your post as I found them one of THE trickiest units to fit a decoder on. Never could get them to run as well after having had to remove the wheels and springs to fit the decoder. Hope they are not the same and the next 18 interface may offer hope of an easier fit.

And Arrived

Ordered😀

Still no sign of the sound fitted versions?

All 3 versions of Kernow 47 003 now showing in stock.

Bit confused. I thought this was a Kernow exclusive.