RMweb Gold Wellyboots Posted November 3, 2017 RMweb Gold Share Posted November 3, 2017 As Parkside have now been aquired by Peco I thought it might be worth stating a discussion thread for the range in the Peco area. At the moment the Peco website only has holding page for the range; https://www.peco-uk.com/page.asp?id=parkside Dundas Models remains independent and has it's own website; http://www.dundasmodels.co.uk/home.html Regards Link to post Share on other sites More sharing options...
Derekl Posted November 6, 2017 Share Posted November 6, 2017 RM arrived this morning with a glossy enclosure listing Parkside by Peco - seems to include all the 00 kits, 0 and N, plus the accessories, such as chassis. There is a guide on assembly as well. No mention of prices. It looks like Peco intend to keep the range and expand by marketing. Encouraging, I think. 2 Link to post Share on other sites More sharing options...
Western Star Posted November 11, 2017 Share Posted November 11, 2017 (edited) Encouraging, I think. Yes. As yet there is no clear picture as to how Peco is going to support S7 modellers who have been able to obtain Parkside kits with S7 wheels by:- * mail-order; * pre-order for collection at shows; * wheel exchange at shows. Indications to date are that Peco is prepared to do wheelset exchange by post. Edited November 20, 2017 by Western Star Link to post Share on other sites More sharing options...
RMweb Premium Dava Posted November 11, 2017 RMweb Premium Share Posted November 11, 2017 Parkside used to do a range of Scottish private owner liveried coal wagons based on P501 [7mm scale] These weren't in their own catalogue and not in the new one either but could be obtained at shows, will they re-appear one wonders? The catalogue hints at new wagons. A Scottish malt hopper wagon would be useful for brewery & distillery layouts, they had a pitched roof similar to a salt wagon but higher. There are also repeated and reasonable requests from Cornish & other modellers for hooded China clay wagons, if a class 22 emerges this demand will likely increase. Dava Link to post Share on other sites More sharing options...
Nearholmer Posted November 11, 2017 Share Posted November 11, 2017 Does anyone know whether Parkside kits accept Slaters axles? Important to me, because I swing the opposite way to Western Star, and run coarse wheel standards, which Slaters supply. Thus far, plastic hasn't been allowed on my layout, but that catalogue in Rm has set me thinking. Kevin Link to post Share on other sites More sharing options...
BG John Posted November 11, 2017 Share Posted November 11, 2017 My Parkside wagons, NB open and van, have Slaters wheels, and they used to sell them. I didn't build the kits, but I don't think there's any doubt that they fit. Link to post Share on other sites More sharing options...
JeremyC Posted November 12, 2017 Share Posted November 12, 2017 (edited) RM arrived this morning with a glossy enclosure listing Parkside by Peco - seems to include all the 00 kits, 0 and N, plus the accessories, such as chassis. There is a guide on assembly as well. No mention of prices. It looks like Peco intend to keep the range and expand by marketing. Encouraging, I think. Harburn Hobbies in Edinburgh held a Peco promotion this weekend attended by a Peco representative to to promote the Parkside range and the new points. He told me that the intention is to expand the Parkside range and that the former owner of Parkside will be acting as an advisor on future products. He also said that sales of kits are increasing, driven, it is thought, by the rising price of RTR models. He agreed with a comment that kit manufacturers can exploit the periodic non availability of RTR models caused by their being produced in batches. The brochure mentioned above shows that the contents of the Parkside kits will not change, the '00' kits will still include wheels [and although it isn't stated the illustration shows metal wheels] and the '0' gauge kits will be complete including transfers. Edited November 12, 2017 by JeremyC 1 Link to post Share on other sites More sharing options...
Pint of Adnams Posted November 12, 2017 Share Posted November 12, 2017 Yes. As yet there is no clear picture as to how Peco is going to support S7 modellers who have been able to obtain Parkside kits with S7 wheel by:- * mail-order; * pre-order for collection at shows; * wheel exchange at shows. Indications to date are that Peco is prepared to do wheelset exchange by post. I would submit that Peco would do better by offering the option of no wheels if purchased (mail order) through the shop at Beer. This would save Peco the hassle of stocking a wider range of alternative profiles as Parkside Dundas used to do (viz. coarse scale as well as S7) and allow modellers a wider choice of supplier still. Slightly OT but relevant is that Peartree Engineering and Roxey all-steel wheels are preferred by some for the additional weight, especially for useful for plastic kits, which may be the reason that Slater's has just announced its own solid steel wheels too. M&M Models sell the Peartree wheels with miniature ball bearings in place of the pin point type. Finally there is in the case of Slater's wheelsets a cost differential between the various profiles that needs to be allowed for as well. Link to post Share on other sites More sharing options...
Pint of Adnams Posted November 12, 2017 Share Posted November 12, 2017 Parkside used to do a range of Scottish private owner liveried coal wagons based on P501 [7mm scale] These weren't in their own catalogue and not in the new one either but could be obtained at shows, will they re-appear one wonders? The catalogue hints at new wagons. A Scottish malt hopper wagon would be useful for brewery & distillery layouts, they had a pitched roof similar to a salt wagon but higher. There are also repeated and reasonable requests from Cornish & other modellers for hooded China clay wagons, if a class 22 emerges this demand will likely increase. Dava There's always the extensive range of transfers and pre-finished kits from POWSides: http://www.powsides.co.uk/ who supplied Parkside Dundas with the Scottish ones you mention. 1 Link to post Share on other sites More sharing options...
vaughan45 Posted November 12, 2017 Share Posted November 12, 2017 My Parkside wagons, NB open and van, have Slaters wheels, and they used to sell them. I didn't build the kits, but I don't think there's any doubt that they fit. As far as I'm aware all 7mm scale Parkside kits were supplied with Slater's wheelsets, which Parkside also used to supply separately. Don't know if Peco will change from these to their own brand as supplied in their 7mm scale (ex-Webster) kits - although these are only offered in 8 spoke & 3 hole disc versions (no split spoke type). Unfortunately my experiences with the Peco wheelsets has not always been good as they can have a tendency to shed their metal rims. Link to post Share on other sites More sharing options...
Pint of Adnams Posted November 15, 2017 Share Posted November 15, 2017 I now have a copy of the Parkside by Peco catalogue to hand and I'm impressed by the effort that the Peco folks are putting into the range. The catalogue is A4 format, full colour and runs to 16 pages. Inside it starts with 3 pages of illustrated step by step instructions for building the 00 gauge 16T Mineral Wagon (PC21) and 0 gauge LMS 20T Brake Van (PS111), although there's the odd hiccup in that step 1 in assembling the Brake Van consists of drilling out the holes in the body for handrails with a pin vice by capillary action... you have to read it to get it. At the end of those builds it sets out Peco's acquisition of and ambitions for the Parkside ranges. It also lists the basic kit contents in both those scales and both include wheels, although there isn't any information about exchanges to other wheel standards. That's followed by 6 fully illustrated pages of each 00 gauge kit and the accessories in that scale, 5 fully illustrated pages for the 0 gauge kits and accessories and the back page illustrates the limited range available in N gauge. I'm informed that the new Peco website is well on in development and should be going live in the not too distant future. The suggestion of making this catalogue available as a PDF download is being taken under consideration for it. 3 Link to post Share on other sites More sharing options...
70b Posted November 16, 2017 Share Posted November 16, 2017 I now have a copy of the Parkside by Peco catalogue to hand can I ask are they avilable in magazines, and which ones? or are they at model shops to pick up? thanks in advance I. Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted November 16, 2017 RMweb Gold Share Posted November 16, 2017 (edited) can I ask are they avilable in magazines, and which ones? or are they at model shops to pick up? thanks in advance I. The catalogue is included (bagged) with the December issue of Railway Modeller. John Edited November 16, 2017 by Dunsignalling Link to post Share on other sites More sharing options...
Pint of Adnams Posted November 16, 2017 Share Posted November 16, 2017 can I ask are they avilable in magazines, and which ones? or are they at model shops to pick up? thanks in advance I. A copy is in the bag with the current (December) issue of Railway Modeller. No doubt Peco stockists will be receiving supplies but I do not know when - there are some retailers on this forum who might know the answer. Or, you can wait for the new website and hope that it is a downloadable PDF. Link to post Share on other sites More sharing options...
RMweb Premium OnTheBranchline Posted December 15, 2017 RMweb Premium Share Posted December 15, 2017 I hope Peco makes new kits rather than just produce more of the same. Link to post Share on other sites More sharing options...
Pint of Adnams Posted December 16, 2017 Share Posted December 16, 2017 I hope Peco makes new kits rather than just produce more of the same. Not only have Peco made it very clear in print that they intend to develop and extend the range but they have also invited suggestions for new kits. This is probably easiest to realise in 0 gauge as the range is currently limited, with quite a few very useful kits in the 00 range not repeated in the larger scale nor available elsewhere. The problem becomes more challenging in 00 gauge as an increasing number of proprietary/RTR manufacturers introduce models of types that Parkside Dundas developed as kits over the many years that they have been in business. A simple wishful statement on a forum is of little use, nor is agreeing with it. If you or anyone else has any genuine ideas and suggestions then contact Peco through the Technical Bureau, ideally with some supporting evidence as to why whatever you propose in whichever particular scale will be worth their investment. Link to post Share on other sites More sharing options...
stewartingram Posted December 16, 2017 Share Posted December 16, 2017 I posted this in the other Parkside thread the a few days ago, if anyone is interested? I was in the Model Centre in Ely (Cambs) this week, there were Parkside kits in both the old packaging (P-D red) & the new Peco blue packaging. Not many, but at least available. Stewart Link to post Share on other sites More sharing options...
Flyingscotsmanfan Posted December 16, 2017 Share Posted December 16, 2017 Are the new Peco ones in boxes like the ratio kits or are they bagged like the old Parkside Dundas kits? Link to post Share on other sites More sharing options...
County of Yorkshire Posted December 16, 2017 Share Posted December 16, 2017 (edited) Are the new Peco ones in boxes like the ratio kits or are they bagged like the old Parkside Dundas kits? Saw some Peco branded Parkside kits in Monk Bar Models in York today and they are very much still bagged. I do think there is good scope to expand the range - do we not often hear from those in the know that kit and rtr coverage of big 4 open and van wagons is pretty poor given the sheer number of them built in the 1910's, 1920's and 1930's? There are so many diagrams of GWR open wagon that have never been done, for instance. CoY Edited December 16, 2017 by County of Yorkshire 1 Link to post Share on other sites More sharing options...
Andy Y Posted December 20, 2017 Share Posted December 20, 2017 Modelmasters had been notifying customers that they were withdrawing their minipacks for Parkside kits. Here's why... Modelmaster will be supplying PECO with bespoke Decal Sets to be included in every 4mm Scale PECO Parkside Dundas Wagon Kit from early 2018. Each decal set will include alternative numbers (and markings for alternative eras where applicable) That's why we're withdrawing all existing Parkside Dundas WAGON MINIPACKS from our Website permanently from the 31st December 2017 Some Modelmaster Minipacks will still be available from Peter's Spares, who sell our decals on eBay and online, until stocks are exhausted. SOME MINIPACKS WILL STILL APPEAR ON OUR WEBSITE FOR CAMBRIAN & OTHER KITS. 2 Link to post Share on other sites More sharing options...
RMweb Gold Gilbert Posted December 20, 2017 RMweb Gold Share Posted December 20, 2017 A pity if you've got a stash of unbuilt kits! Hopefully the bespoke sets will be available as "spares" from Peco.... Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted December 20, 2017 RMweb Gold Share Posted December 20, 2017 A pity if you've got a stash of unbuilt kits! Hopefully the bespoke sets will be available as "spares" from Peco.... Other manufacturers are available. Mike. Link to post Share on other sites More sharing options...
caradoc Posted December 21, 2017 Share Posted December 21, 2017 A pity if you've got a stash of unbuilt kits! Hopefully the bespoke sets will be available as "spares" from Peco.... Many of the standard decal sets cover Parkside kits, although maybe a bit more expensive if only one or two wagons are to be numbered. Link to post Share on other sites More sharing options...
0_gauge_novice Posted December 21, 2017 Share Posted December 21, 2017 The parkside catalogue can be downloaded from the respective Peco webpage :-) Link to post Share on other sites More sharing options...
Pint of Adnams Posted December 21, 2017 Share Posted December 21, 2017 The parkside catalogue can be downloaded from the respective Peco webpage :-) Brilliant - well done Peco for acting on my suggestion even though the current/old website is due for replacement soon. No templates for the new Code 75 BH track though... Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now