Jump to content
 
  • entries
    111
  • comments
    916
  • views
    35,695

About this blog

This blog complements my Pre-Grouping Blog by covering my modelling activities in the Broad Gauge era of the Great Western Railway.  As with the earlier blog, I intend to cover the various methods by which I construct elements of the Broad Gauge scene.  For more background see https://www.rmweb.co.uk/community/index.php?/blogs/entry/17705-a-different-type-of-railway/

 

Entries in this blog

General

Taking Stock

On one or two occasions, I have received comments along the lines of “we want a layout”. From the beginning of my exploration of the broad gauge, it has been my intention to produce some sort of layout or diorama to display the various models of rolling stock that I’ve constructed.   Of course I already have a small layout carrying both narrow and standard gauge routes, based in Oxfordshire, towards the end of the 19th century. This layout continues to provide entertainment to my grand
MikeOxon

MikeOxon in General

10
General

‘Fire Fly’ class – Part Two

As I carried out my research for this project in Part One (Research), I realised just how difficult it can be to decide what these old engines were actually like!   One of the problems seems to be that, in those days, engines were hand-built by craftsmen who. perhaps, were not so keen on trying to follow a drawing but knew how things should be done!   I noticed, for example, that the shape of the firebox casing on the ‘Fire Fly’ replica is actually quite different from that seen in an
MikeOxon

MikeOxon in General

9
General

Brunel's Britzka - part 2

At the end of the previous post I had printed a set of parts, which needed to be assembled into the complete carriage. I must admit that it was a bit of a shock to see how tiny some of the parts can be in reality, when they had looked quite substantial on the computer screen!   The springs were by far the smallest parts but I had chosen to print them separately so that they could lie flat on the printer bed. This orientation ensured that the hollow centres of the elliptic springs would
MikeOxon

MikeOxon in General

7
General

GWR Posting Carriage – Part 3

In this post, I turn to the design of a chassis for my model Posting Coach. Fortunately, there is a detailed contemporary description and illustration, given in Whishaw’s book ‘The Railways of Great Britain and Ireland’, published in 1842.   According to Whishaw: “The under carriage is formed of two soles, 7 feet 8 inches apart, 9 inches deep, and 4 inches thick, and projects 10 inches at each end beyond the body ; and six cross pieces, one at each end without the line of the body, whi
MikeOxon

MikeOxon in General

8
General

Broad Gauge Covered Van

Because of various distractions, I’ve not had much time for model-building recently. I have however been spending quite a lot of time thinking about those very early days of the GWR when those first engines, which I modelled last year, were being delivered. Some of these engines were delivered by canal to West Drayton, where it seems that the first depot of the GWR was established. At that time, the way ahead was far from certain and concerns about the desirability of adopting Brunel’s proposals
MikeOxon

MikeOxon in General

7
General

Wooden Goods Brake Van

In a previous post, I commented that I felt I was getting the hang of 3D-modelling. That didn’t mean that I can’t still get into a mess and sometimes things happen in ‘Fusion 360’ for which I have no explanation. For example, I was approaching the final stages of the chassis I shall describe below and found that one of the complete axle-box assemblies had moved about a centimetre from its proper place on the sole-bar. Back-tracking through the history made no difference, as the software seemed t
MikeOxon

MikeOxon in General

5
General

Hinged Doors for a Luggage Box

By the end of the previous post, I had completed the chassis for my planned Luggage Box. I expected the Luggage Box itself to be a simple construction: two panelled ends, two sides, and a roof.   Following my now usual practice, I created each of these parts as a separate ‘body’ in ‘Fusion 360’, so that each could be laid flat on the printer bed and could be printed in a few minutes, to the required panel thickness. A wave of a 200° soldering iron to seal the joints and that would be t
MikeOxon

MikeOxon in General

6
General

Printing ‘Eagle’

In my previous post, describing my design method, I wrote:  “This method also means that I do not need to make any of my own measurements but simply rely on the drawing being accurate and traceable”   A lot of early railway drawings were far from accurate!  I found the following in a collection belonging to William Strickland, an American architect:     According to Wikipedia, “William Strickland's Reports are the starting point of American railway engineering, and
MikeOxon

MikeOxon in General

4
General

A Missing Link?

In my last few posts, I’ve been delving into the almost lost world of the early days of the GWR broad gauge. I notice that my previous post aroused little comment so, perhaps, I have moved rather too far from what most people think of as ‘railway modelling’ - but I do like using models as a way of improving our understanding of these early engines.  I do appreciate the various 'likes' that many of you have given me.   Before I move back into more familiar territory, there is one more p
MikeOxon

MikeOxon in General

16
General

GWR Posting Carriage - Part 2

I hadn’t expected to make quite such rapid progress with this model – I must be getting slightly more proficient at using the ‘Fusion 360’ CAD software!   In part 1, I showed how I created the rather complex profile of the sides of the Posting Carriage by extruding a drawing of one end. I drew the end profile as a series of straight lines and arcs, traced over a drawing contained in one of the very useful Broad Gauge Society data sheets.     While this process gave
MikeOxon

MikeOxon in General

5
General

An Ugly Duckling – 4

Now, wake up at the back there, @Mikkel, this is a new post on this subject.   At the end of my previous post, I wrote “Next, I shall turn my attention to designing and constructing a suitable chassis.”, so that’s the subject for today.   Frames   The frames of these early engines were rather unusual in that they stopped short in front of the leading drivers. The front bogie was attached directly to the boiler in traction-engine style. The frames were also quite lig
MikeOxon

MikeOxon in General

5
General

Aeolus Chassis and Tender

I constructed the chassis for my Aeolus model from several separately printed components:   Outside frames, with rivet detail Inside frames, with splasher tops Front Buffer beam, linking frames Rear drag-bar and footplate, linking frames   After printing these parts, I fused them together by welding the seams using a fine-tip soldering iron set to 200°C. This proved easier than I expected, partly because the PLA plastic has low thermal conductivity, so i
MikeOxon

MikeOxon in General

6
General

1837 Carriage

I.K. Brunel wrote the following, in a letter to T. E. Harrison on 5th March 1838: “... let me call your attention to the appearance - we have a splendid engine of Stephenson's, it would be a beautiful ornament in the most elegant drawing room and we have another of Quaker-like simplicity carried even to shabbyness but very possibly as good as engine, but the difference in the care bestowed by the engine man, the favour in which it is held by others and even oneself, not to mention the public, is
MikeOxon

MikeOxon in General

3
General

Modelling a ‘house removal’ train

I see that we’re now in the 10th year since I started writing my pre-grouping blog. Looking back, I realise how much my approach to railway modelling has changed over that period. There have been two major technical innovations and one significant change of emphasis in my interests.   The first technical innovation, which occurred soon after I started exploring the earlier period, was the Silhouette Cutter, which opened up the possibility of creating complex panelled carriage sides. Si
MikeOxon

MikeOxon in General

3
General

Adding Cladding

In commenting on an earlier post, Michael Edge pointed out that the visible diameter of a locomotive boiler is greater than the diameter of the metal boiler itself and he suggested that I should have bought a larger diameter tube for my model of 'Tantalus'.   I had already been thinking about how to add the visible boiler rings and then had the idea “why not 3D-print the boiler cladding?” After all, the prototype boiler was metal, whereas the cladding was initially of wooden planks, th
MikeOxon

MikeOxon in General

4
General

‘Fire Fly’ class – Part Three

It has taken me a considerable amount of thought before deciding how to proceed with the next stage of building my my ‘Fire Fly’ class model. The obvious method would be to construct a strong frame around the outside, as I have done for previous models, but it doesn’t really work with this prototype.     Fire-Fly replica at Didcot showing Boiler Support   As I showed in the previous post, the prototype was built with four short frames linking the smokebox and firebo
MikeOxon

MikeOxon in General

4
General

An Ugly Duckling - 3

If my last post was about ‘making choices’, the subject of this one is definitely ‘rivets’. These earlier engines seem to have been covered in the things so, thank goodness, 3D-printing software tools have come to my aid in reproducing them all. In fact I only had to draw one or two and all the rest were produced by tools such as ‘pattern on path’ which instantly created long rows of the things, following the contours of the surface on which they are placed. There must be at least 350 rivets on
MikeOxon

MikeOxon in General

5
General

An 1850s Broad Gauge Tilt Wagon

The ‘tilt wagon’ seems to have been a popular design in early broad gauge (BG) history but I hadn’t got round to building a model before now. A very few of these wagons were converted to standard gauge and I did model one of those back in 2014, regarding it as an interesting curiosity!   In the early days, it seems that most goods (and 3rd class passengers) were carried in open wagons but a growing need for weather protection led to the addition of canvas covers, known as ‘tilts’ (from
MikeOxon

MikeOxon in General

12
General

Bodies & Components

I’ve had one or two messages from people who say they have enjoyed reading through my blogs. I should therefore sound a note of caution, especially in the field of 3D printing – my posts follow my own, often halting, progress along a learning curve and I still feel myself to be a long way from an end-point. I was looking back at some of my earlier designs and although they came out reasonably well in the end, my methods were something of a ‘dog’s breakfast’. I hope you won’t repeat too many of m
MikeOxon

MikeOxon in General

6
General

‘Rob Roy’ Re-Framed

Six years ago, in June 2017, I embarked on scratch-building a model of the Broad Gauge ‘Waverley class’ engine ‘Rob Roy’. The prototype was involved in an accident near Bullo Pill, where some of my wife’s ancestors were working for the GWR at the time.   ‘Rob Roy’ – Accident near Bullo Pill, 1868   I took advantage of the fact that the boiler used for the Waverley-class was the same as that on the Gooch Standard Goods engines, for which the Broad Gauge Society (BGS) provide
MikeOxon

MikeOxon in General

7
General

3D-Printed Cattle Wagon - 3

Building the Chassis   This is an addendum to my previous post about building a Broad Gauge cattle wagon body. Although I built a chassis at that stage, I found the construction was too light and would not support wheel-sets adequately. I should have remembered that I had the same problem with the first design I did for a carriage chassis, so this post is an aide memoire to help me avoid the same mistakes again.   My chassis is basically a rectangle to fit under the body, wit
MikeOxon

MikeOxon in General

4
General

My Atmospheric Caper - Part 1

Introduction   Having worked my way back to the very beginnings of the GWR, it’s been hard to think of where to go next. I’ve enjoyed exploring those odd-ball engines that Brunel ordered for his new concept of a railway, even though they proved to be disastrously undersized. Nevertheless, several of them had quite long lives as branch-line engines.   I do enjoy ‘bringing to life’ forgotten areas of railway history and, for the broad gauge, the ultimate in odd-ball ideas was,
MikeOxon

MikeOxon in General

12
General

A Tender for 'Rob Roy' - 1

It’s been some time since I last tackled an etched brass kit, after spending most of my time recently in learning about 3D printing and, before that, Silhouette cutting. I had to refresh my memory on ‘the rules of the game’!   I bought the Broad Gauge Society kit (FL07) for a 6-wheel tender some time ago and have only just got around to its assembly. I was pleased to see that the instructions start with the reminder that “… some parts are a little over scale due to limitations of the d
MikeOxon

MikeOxon in General

8
General

Photographic Evidence

Having wandered into South Devon territory with my atmospheric caper, I started to look at some of the steam engines used on that line. I realised that, although I have modelled several early passenger engines, including the Firefly class, I have not tackled any of the early goods engines.   The Leo class 2-4-0 were built as goods engines, starting in 1841. It was soon realised, however, that they had insufficient adhesion weight, so all the engines were converted to carry saddle tanks
MikeOxon

MikeOxon in General

2
General

Fire Fly Class – Part Four

Angled Spokes   I ended the previous part of this series by noting that my next subject would be wheels. This subject, once again, raised questions as to what were the real facts! An ‘official’ GWR drawing shows alternate spokes sloping in opposite directions between hub and rim, as below :     Drawing of ‘Firefly’ Driving Wheel   On the other hand, another ‘official’ plan view of the frames shows one set of spokes fitted radially, while the other set is
MikeOxon

MikeOxon in General

4
×
×
  • Create New...