RMweb Premium Izzy Posted July 17, 2019 RMweb Premium Share Posted July 17, 2019 My thoughts re 3D centres were directed at plastic insulated ones to enable a fairly quick/simple conversion using the chassis ‘as is’, just hanging them on the existing axles. Another thought that occurs is whether delrin bushes could be generated to replace the brass ones, thus enabling standard wheel use. But I think that perhaps there isn’t the room for even the smaller muffs to be used with them in the chassis from the looks of the photos. Izzy Link to post Share on other sites More sharing options...
JohnBS Posted July 22, 2019 Share Posted July 22, 2019 Jerry, Spotted yesterday. I’m not very good at engines that aren’t dark green. Perhaps it is a 2F with some old compartment stock? Warm wishes, John 1 4 Link to post Share on other sites More sharing options...
RMweb Gold queensquare Posted July 22, 2019 Author RMweb Gold Share Posted July 22, 2019 41 minutes ago, JohnBS said: Jerry, Spotted yesterday. I’m not very good at engines that aren’t dark green. Perhaps it is a 2F with some old compartment stock? Warm wishes, John Morning John, its definitely a Midland loco in that livery although the class designations on the coach doors has me baffled! Jerry 1 Link to post Share on other sites More sharing options...
D869 Posted July 22, 2019 Share Posted July 22, 2019 26 minutes ago, queensquare said: Morning John, its definitely a Midland loco in that livery although the class designations on the coach doors has me baffled! Jerry I think 25th class is a modern innovation for services which connect with Ryan Air. 1 3 Link to post Share on other sites More sharing options...
RMweb Premium CF MRC Posted July 22, 2019 RMweb Premium Share Posted July 22, 2019 2 hours ago, JohnBS said: Jerry, Spotted yesterday. I’m not very good at engines that aren’t dark green. Perhaps it is a 2F with some old compartment stock? Warm wishes, John I would say it has origins in a Schenectady engine, as opposed to a Baldwin mogul. The cars look to be old Midland Pullmans. But I am due an eye test shortly. Tim 1 1 Link to post Share on other sites More sharing options...
Moderators AY Mod Posted July 22, 2019 Moderators Share Posted July 22, 2019 Can't be one of Jerry's, he's got round to doing the lining. 1 Link to post Share on other sites More sharing options...
RMweb Premium Tim Dubya Posted July 22, 2019 RMweb Premium Share Posted July 22, 2019 everybody knows it's 0298 Beattie... just in it's oxide Link to post Share on other sites More sharing options...
Caley Jim Posted July 22, 2019 Share Posted July 22, 2019 (edited) 7 hours ago, JohnBS said: Spotted yesterday.... At least this one seen today is in black, but it's a pity they didn't manage to get it to sit level or hide that gear wheel in the centre! Built Vienna 1889,so definitely Pre-grouping. Jim Edited July 22, 2019 by Caley Jim B****y predictive text again! 3 1 Link to post Share on other sites More sharing options...
Talltim Posted July 22, 2019 Share Posted July 22, 2019 Look at that great big Phillips screw head in the middle of the gear! Link to post Share on other sites More sharing options...
Caley Jim Posted July 22, 2019 Share Posted July 22, 2019 57 minutes ago, Talltim said: Look at that great big Phillips screw head in the middle of the gear! Think that's to let you disconnect the con-rod to check the quartering! Jim 1 Link to post Share on other sites More sharing options...
2mm Andy Posted July 22, 2019 Share Posted July 22, 2019 The person who rivetted the tanks must have been having a bad day too.... (it seems that this loco is a 2008 "rebuild" using a set of original frames and a new boiler/tanks so I'm guessing that the tanks are welded with fake rivet heads glued on). Andy Link to post Share on other sites More sharing options...
RMweb Gold queensquare Posted July 22, 2019 Author RMweb Gold Share Posted July 22, 2019 1 hour ago, Caley Jim said: At least this one seen today is in black, but it's a pity they didn't manage to get it to sit level or hide that gear wheel in the centre! Built Vienna 1889,so definitely Pre-grouping. Jim The name and builders plates are on straight Jim so they've obviously forgotten to tighten up the rear body fixing screw - we've all done it! Jerry 1 1 Link to post Share on other sites More sharing options...
Caley Jim Posted July 22, 2019 Share Posted July 22, 2019 13 minutes ago, queensquare said: The name and builders plates are on straight Jim so they've obviously forgotten to tighten up the rear body fixing screw - we've all done it! Jerry There is a plate on the other side with a tick list for maintainance checks. I'll try and get a shout of that next time. I'll be having ein grosse bier with my dinner tonight! Jim 1 Link to post Share on other sites More sharing options...
Caley Jim Posted July 23, 2019 Share Posted July 23, 2019 14 hours ago, 2mm Andy said: The person who rivetted the tanks must have been having a bad day too.... (it seems that this loco is a 2008 "rebuild" using a set of original frames and a new boiler/tanks so I'm guessing that the tanks are welded with fake rivet heads glued on). Andy Maybe the new tanks were an etch with the sides half etched and the rivets unetched. It would have needed a h**l of a soldering iron to put it together, though! Jim 1 Link to post Share on other sites More sharing options...
RMweb Premium Ian Morgan Posted July 23, 2019 RMweb Premium Share Posted July 23, 2019 16 hours ago, Caley Jim said: I'll be having ein grosse bier with my dinner tonight! The bar is on the other side of the valley 6 Link to post Share on other sites More sharing options...
Caley Jim Posted July 23, 2019 Share Posted July 23, 2019 5 hours ago, Ian Morgan said: The bar is on the other side of the valley Us. Seen that when we've been here before. Never mind a really useful engine, that's what you call a really useful wagon! Every layout should have one (or more), preferably fully loaded. One has to keep ones fluid levels up in this heat. Jim 1 Link to post Share on other sites More sharing options...
2mm Andy Posted July 23, 2019 Share Posted July 23, 2019 (edited) Two memories stand out from my holiday in Jenbach (scarily it was something like 25 years ago!) - one was the almost nightly thunderstorms which broke the daytime heat (very impressive when the thunder echoes around the mountains) and the second was the invite to the grand opening of the new fire station in the town. I wasn't old enough to partake of the Schnapps, but I do still remember the grilled sausages and the oompah band! We enjoyed rides on both the Zillertalbahn and the Achenseebahn. Looks like you're having a good holiday, Jim Andy Edited July 23, 2019 by 2mm Andy Link to post Share on other sites More sharing options...
Caley Jim Posted July 25, 2019 Share Posted July 25, 2019 On 22/07/2019 at 18:01, Caley Jim said: There is a plate on the other side with a tick list for maintainance checks...... Here's the plate I mentioned This one is on No 1. Theodor. They don't seem to have tightened up the screw on this one either. Jim 4 Link to post Share on other sites More sharing options...
timatheronwood Posted August 16, 2019 Share Posted August 16, 2019 But according to the plate "Theodor" has had no maintenance at all! Or perhaps the thunderstorms at night remove the chalk marks? The centre wheel has indications of a belt drive to the rear axle. Tim Link to post Share on other sites More sharing options...
chrisveitch Posted August 16, 2019 Share Posted August 16, 2019 1 hour ago, timatheronwood said: The centre wheel has indications of a belt drive to the rear axle. Tim Not sure if you were serious, but that looks like it's a band brake on the rack drive jackshaft. You can see an operating crank just above the middle of the rear section of the coupling rod. The shaft will drive the rack wheel visible under the centre of the loco - it's a rack-and-adhesion system and it's pictured on a section with no rack rail. 1 Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted August 16, 2019 RMweb Gold Share Posted August 16, 2019 And I thought it was just the worm wheel showing Don Link to post Share on other sites More sharing options...
Caley Jim Posted August 16, 2019 Share Posted August 16, 2019 5 hours ago, chrisveitch said: The shaft will drive the rack wheel visible under the centre of the loco - it's a rack-and-adhesion system and it's pictured on a section with no rack rail. There is a reduction gearing between the drive shaft and the rack wheel shaft, which means that when running it looks and sounds as if it should be going much faster than it actually is. The outside cranks on the rack wheel shaft then drive the coupled wheels via the coupling rods. The last section of the line from Eben am Achensee to the pier at Seespitz is more or less level, so the rack stops at Eben. Jim Link to post Share on other sites More sharing options...
RMweb Gold Popular Post queensquare Posted September 5, 2019 Author RMweb Gold Popular Post Share Posted September 5, 2019 The North Somerset Light stud (plus a couple of Midland interlopers) lined up ready for this weekends outing to Swindon Steam. Jerry 23 Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted September 5, 2019 RMweb Premium Share Posted September 5, 2019 That blue engine on the left sticks out like a sore thumb! It needs weathering ... 1 1 1 Link to post Share on other sites More sharing options...
RMweb Gold queensquare Posted September 5, 2019 Author RMweb Gold Share Posted September 5, 2019 1 hour ago, Kylestrome said: That blue engine on the left sticks out like a sore thumb! It needs weathering ... ........although it is the only one with lamps:-) The blue engine below does need weathering but it will be making its first public appearance since visiting the paint shop. Jerry 12 6 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now