Jump to content
 

Recommended Posts

  • RMweb Gold
10 hours ago, NHY 581 said:

Evening all, 

 

Just in from an evening spent in the garage, finally doing some work on the layout due out at Wells. Things didn't go quite to plan as I ended up making a few amendments......Frankly, it's going to be  damn close. 

 

20240507_210828.jpg.64211a61457e49baadeee96c4028636b.jpg

Revised track plan looks more interesting, visually and operationally.

 

  • Like 1
  • Thanks 1
Link to post
Share on other sites

  • RMweb Gold
1 hour ago, paulbb said:

or possibly Lamb Regis

 

Hi Paul, 

 

It was my intention to build Lamb Regis after I built Mutton. Mutton, as long term readers of this waffle may recall was inspired by Combpyne. 

 

Here's the blurb I used to hand out at shows when I was out with Mutton. 

 

 

20240508_214518-01.jpeg.0090ee0045d2d05981f0422aa77187d5.jpeg

 

Great minds, Paul, great minds. 

 

Rob. 

  • Like 2
Link to post
Share on other sites

  • RMweb Gold

This evening has seen track cut and temporarily laid in place. Bay still needs wiring up and the rest of the clay laying arond the engine shed. 

 

A tidier view than the last. 

 

20240508_212703-01.jpeg.775dea1ae54443dd6fde8cae952148cd.jpeg

 

Platform ramp will be cut off. An embankment will be to the right and will follow the bay around. 

 

Rob

  • Like 10
Link to post
Share on other sites

  • RMweb Gold

A few more images. Pretty rubbish but taken to check viewing angles. I do check these things, honest. 

 

20240508_210255-01.jpeg.cdbf033479c6109e6c4ad16144bd91dc.jpeg

 

20240508_210447-01.jpeg.95717007bb04777accb8a7b760be3a8e.jpeg

 

20240508_210834-01.jpeg.61a18e58be8616dfe8f128f8ed3aa7f8.jpeg

 

20240508_210930-01.jpeg.846caa7185fc9ed7c3d45e9c96e92295.jpeg

 

20240508_210722-01.jpeg.9eaaebd33d8ee3969c4d2319d461bd1f.jpeg

 

20240508_210501-02.jpeg.7bc7738a2a110e90e2d07ea1be9428cc.jpeg

 

I'm finally starting to get a feel for it. 

 

Rob

 

  • Like 13
  • Round of applause 2
Link to post
Share on other sites

  • RMweb Gold
55 minutes ago, NHY 581 said:

A few more images. Pretty rubbish but taken to check viewing angles. I do check these things, honest. 

 

20240508_210255-01.jpeg.cdbf033479c6109e6c4ad16144bd91dc.jpeg

 

20240508_210447-01.jpeg.95717007bb04777accb8a7b760be3a8e.jpeg

 

20240508_210834-01.jpeg.61a18e58be8616dfe8f128f8ed3aa7f8.jpeg

 

20240508_210930-01.jpeg.846caa7185fc9ed7c3d45e9c96e92295.jpeg

 

20240508_210722-01.jpeg.9eaaebd33d8ee3969c4d2319d461bd1f.jpeg

 

20240508_210501-02.jpeg.7bc7738a2a110e90e2d07ea1be9428cc.jpeg

 

I'm finally starting to get a feel for it. 

 

Rob

 

 

Looking good Rob.

 

You can certainly see from your snaps you've managed to achieve that sense of space and openness.

 

Nicely done!

 

Cheers,

 

Mark 

 

 

Link to post
Share on other sites

  • RMweb Gold
18 minutes ago, 46444 said:

 

Looking good Rob.

 

You can certainly see from your snaps you've managed to achieve that sense of space and openness.

 

Nicely done!

 

Cheers,

 

Mark 

 

 

 

Hi Mark, 

 

The scenic section is a bit longer ( just over 4'6" ) but narrower by 1cm. I'm struggling to get past this stage to be honest but once I do I'll be a lot happier. The engine shed is probably the largest structure I've used to date on all the layouts. Much agonising over it but I think it works. It also seems to balance with the platform/ buildingsxat the other end.  I'm now torn between adding a few trees as per Ewe or going flat and open. I'll have a better idea once I start on the embankments etc which may be lower than first thought. 

 

As uou can tell, I really am making this up as I go and sadly,  it shows.....but, as I mentioned above, I do feel I'm finally starting to get into it. 

 

Rob

Link to post
Share on other sites

  • RMweb Gold

Leading on from Mutton's handout, here's the front page from that for Bleat Wharf. 

 

20240508_232544-01.jpeg.72847dfeda7d2f439f453db001a63075.jpeg

  • Like 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...