Popular Post KeithMacdonald Posted November 18, 2022 Popular Post Share Posted November 18, 2022 Perhaps the most relevant? Quote Ron Fisher - R577. Minffordd coal shute. June,1961. - 1961/06.R577. Minffordd coal road, with loco coal being unloaded from the B.R. wagon on the upper level to the F.R. wagons underneath. 22 Link to comment Share on other sites More sharing options...
Wickham Green too Posted November 18, 2022 Share Posted November 18, 2022 On 17/11/2022 at 11:52, SouthernBlue80s said: ... no matter how carefully I try to remove parts from the spru they break. ... My favourite tool for removing plastic items from sprues - and brass from etches - is a pair of miniature end cutters ...... though you can't always reach the item you're after ! 😕 1 Link to comment Share on other sites More sharing options...
Wickham Green too Posted November 18, 2022 Share Posted November 18, 2022 3 hours ago, KeithMacdonald said: Unloading methods clearly vary with era and location. Reminds me of my first trip to China : A wagon like that was being unloaded and the crew had got a bit further so were working inside - I lost sight of the yard briefly as I passed an advertising hoarding but as I got to a gap in the adverts I saw a shovel-full of coal shoot out from each door in perfect sync .............. didn't happen again while I was watching. 3 Link to comment Share on other sites More sharing options...
SouthernBlue80s Posted November 18, 2022 Author Share Posted November 18, 2022 Progress so far. It's built as a vac brake version. I have downed tools for tonight Parkside kit, kit bashed. Basic paint on and transfers I had in my pile. First stage weathering. More weathering and coal needed. I might paint some old blast I have and see how that looks. Need to find those coupling hooks and figures. Cheers Steve 13 Link to comment Share on other sites More sharing options...
Wickham Green too Posted November 19, 2022 Share Posted November 19, 2022 Erm .................. as a vac-braked wagon - er - why is it grey ? ☹️ 3 Link to comment Share on other sites More sharing options...
SouthernBlue80s Posted November 19, 2022 Author Share Posted November 19, 2022 (edited) 53 minutes ago, Wickham Green too said: Erm .................. as a vac-braked wagon - er - why is it grey ? ☹️ Erm....weirdly the kit came in grey, not sure why they didn't do it in Bauxite. Note ......it's FIRST stage weathering. Tip - you can use the grey effectively as an undercoat, if a wagon is heavily rusted, depending on what technique you are using. Edited November 19, 2022 by SouthernBlue80s 2 Link to comment Share on other sites More sharing options...
Popular Post SouthernBlue80s Posted November 19, 2022 Author Popular Post Share Posted November 19, 2022 (edited) Second stage weathering. I still need to weather coal dust inside and a touch outdide, as well as the coal load and so on. I will put it down for a while now. I can allready see a few bits that need improving. Edited November 19, 2022 by SouthernBlue80s 18 4 Link to comment Share on other sites More sharing options...
Peter Kazmierczak Posted November 19, 2022 Share Posted November 19, 2022 Shouldn't the white diagonal stripe (to indicate the end door) have ends at 45 degrees (like in the first picture in the thread) rather than at 90 degrees on the model? Though presumably there might well have been many variations. 2 Link to comment Share on other sites More sharing options...
SouthernBlue80s Posted November 19, 2022 Author Share Posted November 19, 2022 38 minutes ago, Peter Kazmierczak said: Shouldn't the white diagonal stripe (to indicate the end door) have ends at 45 degrees (like in the first picture in the thread) rather than at 90 degrees on the model? Though presumably there might well have been many variations. Looking at Paul Barttlets invaluable picture rescource they seem to have varied much like the wagons. 1 2 Link to comment Share on other sites More sharing options...
bécasse Posted November 19, 2022 Share Posted November 19, 2022 Often the inside of these wagons was generally much less heavily weathered than the outside, shifting loads, particularly when end-tipped, tending to "clean" the paintwork. The floor would, of course, have given hints of the last load (especially coal dust), and the junction of the sides and floor would show signs, often significant signs, of dark rust setting in. 1 1 Link to comment Share on other sites More sharing options...
SouthernBlue80s Posted November 19, 2022 Author Share Posted November 19, 2022 (edited) 27 minutes ago, bécasse said: Often the inside of these wagons was generally much less heavily weathered than the outside, shifting loads, particularly when end-tipped, tending to "clean" the paintwork. The floor would, of course, have given hints of the last load (especially coal dust), and the junction of the sides and floor would show signs, often significant signs, of dark rust setting in. Thank you. I will bear that in mind I am going to get my coal dust weathering powder out next mainly for the inside. I have just given the inside a general bauxite rust going over for the time being. Thanks again. Edited November 19, 2022 by SouthernBlue80s Link to comment Share on other sites More sharing options...
Wickham Green too Posted November 19, 2022 Share Posted November 19, 2022 3 hours ago, SouthernBlue80s said: Erm....weirdly the kit came in grey, not sure why they didn't do it in Bauxite. ... Same body moulding as the unfitted one ! 🙃 1 1 Link to comment Share on other sites More sharing options...
SouthernBlue80s Posted November 19, 2022 Author Share Posted November 19, 2022 44 minutes ago, Wickham Green too said: Same body moulding as the unfitted one ! 🙃 I guess so :) Link to comment Share on other sites More sharing options...
hmrspaul Posted November 19, 2022 Share Posted November 19, 2022 Why do some have the number panel at right hand end. I've never seen that, and do accept workshops found it very difficult to follow instructions. Paul Link to comment Share on other sites More sharing options...
Wickham Green too Posted November 19, 2022 Share Posted November 19, 2022 Hadn't spotted that ............ maybe 'cos it's the same end as the stripe ??!? 🙄 Link to comment Share on other sites More sharing options...
RMweb Premium Dava Posted November 19, 2022 RMweb Premium Share Posted November 19, 2022 I was at the GCR today and watched a Windcutter train if 16 ton minerals depart. I didn’t photo it as I’ve seen it many times but there is a display by the Windcutter group in the waiting room at Loughborough this weekend for the ‘Last Hurrah’ event. The amount of distortion and bowing of the sides and ends on many wagons is noticeable. Generally from carrying ballast in their later BR or NCB years. This site shows examples. Easier to reproduce with etched brass or n/s bodies than with plastic, where heat and/or solvents can be used with care. http://ukrailways1970tilltoday.me.uk/wagons_16t_mineral_wagon_gcr_page1.html Also QW&W site & Rmweb weekly thread. https://quornwagonandwagon.co.uk/ Dava 1 Link to comment Share on other sites More sharing options...
Wickham Green too Posted November 19, 2022 Share Posted November 19, 2022 36 minutes ago, Dava said: ... distortion and bowing of the sides and ends on ... from carrying ballast in their later BR or NCB years. ... Mostly from carrying scrap metals as few of the 'Windcutter' rake came direct from BR or the NCB. 1 Link to comment Share on other sites More sharing options...
RMweb Premium Ian Smeeton Posted November 19, 2022 RMweb Premium Share Posted November 19, 2022 Some methods are more extreme than others. Regards Ian 10 1 3 Link to comment Share on other sites More sharing options...
Artless Bodger Posted November 19, 2022 Share Posted November 19, 2022 On 18/11/2022 at 10:28, Fat Controller said: The grab tractor sounds to be one of the ones built on the 'back-to-front' Fordson Major; I can't remember the manufacturer's name. Wouldn't it be nice were Oxford to bring one out? (Just did a quick bit of 'Googling'; the machines were known as 'Pelicans', and were built by a firm called Neal, later taken over by Coles) I built one, or an approximation of one, in N scale using the Oxford tractor, based on memories of one in Bearsted goods yard in the 1980s (the yard was disused except for the coal merchant, deliveries by road). The grab is a bit undersized as I used some kit bits in the box which were roughly the right shape. The side frames were made using measurements from a side on photo of a derelict machine which were then scaled according to the dimensions of the model tractor. The boom is 'by eye'. An etched brass kit would be nice to adapt the Oxford tractor, these were quite common vehicles and not just in the UK I believe. 7 Link to comment Share on other sites More sharing options...
SouthernBlue80s Posted November 19, 2022 Author Share Posted November 19, 2022 3 hours ago, Dava said: I was at the GCR today and watched a Windcutter train if 16 ton minerals depart. I didn’t photo it as I’ve seen it many times but there is a display by the Windcutter group in the waiting room at Loughborough this weekend for the ‘Last Hurrah’ event. The amount of distortion and bowing of the sides and ends on many wagons is noticeable. Generally from carrying ballast in their later BR or NCB years. This site shows examples. Easier to reproduce with etched brass or n/s bodies than with plastic, where heat and/or solvents can be used with care. http://ukrailways1970tilltoday.me.uk/wagons_16t_mineral_wagon_gcr_page1.html Also QW&W site & Rmweb weekly thread. https://quornwagonandwagon.co.uk/ Dava Did try to heat up plastic wagon sides once to see if I could get a realistic effect. Failure on my part, it looked too crude on the OO wagon I tried. Perhaps I will experiment more. I saw someone had obtained that distorted bowed effect pretty well on plastic O gauge wagons at somepoint. Steve 1 1 Link to comment Share on other sites More sharing options...
RMweb Premium Mike_Walker Posted November 19, 2022 RMweb Premium Share Posted November 19, 2022 1 hour ago, Ian Smeeton said: Some methods are more extreme than others. Regards Ian Elf n Safety would have an attack of the vapours. 6 Link to comment Share on other sites More sharing options...
RMweb Premium Hal Nail Posted November 20, 2022 RMweb Premium Share Posted November 20, 2022 18 hours ago, bécasse said: Often the inside of these wagons was generally much less heavily weathered than the outside, shifting loads, particularly when end-tipped, tending to "clean" the paintwork. The floor would, of course, have given hints of the last load (especially coal dust), and the junction of the sides and floor would show signs, often significant signs, of dark rust setting in. By less weathered I think you mean less rust patches rather than actually clean? Photos of the insides are of course much rarer than outside (I think theres a thread, or within a thread, specifically discussing this somewhere) but all the ones I've been able to find, including the few on this thread showing open doors, have been almost black, with a hint of rusty tone. 1 Link to comment Share on other sites More sharing options...
Il Grifone Posted November 20, 2022 Share Posted November 20, 2022 (edited) On 18/11/2022 at 10:08, Bernard Lamb said: That all sounds too much like hard work to me. Just pick 'em up and give 'em a good shake.😀 Bernard OK as long as it's an end door wagon and the right way round! Quote Elf n Safety would have an attack of the vapours. Those cables looped around the wagon don't really look up to the job! For figures there are the historic 'Mastermodels' sets of workmen. (eBay swapmeets etc., but avoid collectors' prices.... From what I recall of my visit to the inside of a wooden coal wagon, the inside was in the same tatty condition as the outside with coal dust around the joints between the floor and the sides/ends (as you'd expect). I'll see if I can persuade my daughter to take the portraits of some of my efforts at mineral wagons and post them here. Edited November 20, 2022 by Il Grifone 1 Link to comment Share on other sites More sharing options...
bécasse Posted November 20, 2022 Share Posted November 20, 2022 1 hour ago, Hal Nail said: By less weathered I think you mean less rust patches rather than actually clean? Photos of the insides are of course much rarer than outside (I think theres a thread, or within a thread, specifically discussing this somewhere) but all the ones I've been able to find, including the few on this thread showing open doors, have been almost black, with a hint of rusty tone. Rust patches on the interior sides were relatively rare, when washed down (by rain when empty) they were typically an overall pale rust colour (almost pink), otherwise they tended to show obvious signs of their last load, coal dust for coal, stone dust for stone, for example. Where the sides met the floor, the acidic nature of coal loads meant that significant dark rust formed - as a line along the join rather than any patches, possibly spreading a little way across the floor. The most common body failure for 16 ton minerals was the floor dropping out as a result of this concentrated rusting. 3 1 1 Link to comment Share on other sites More sharing options...
RMweb Premium Hal Nail Posted November 20, 2022 RMweb Premium Share Posted November 20, 2022 39 minutes ago, Il Grifone said: the inside of a wooden coal wagon I would imagine even less prone to rust patches than 16t minerals! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now