MikeHemmings Posted May 15, 2013 Share Posted May 15, 2013 How did I miss this? Just down the road and two of my favourite locos! That makes two of us Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 17, 2013 Author RMweb Premium Share Posted May 17, 2013 Thought it would make a nice change and an introduction to 7mm scratchbuilding to have a crack at a building for the future layout. The subject is the Wenford Bridge Goods Depot. I've used the Gimp software to correct the perspective and put a grid over the top set at 6" centers. I've done a bit of working out and the building appears to have a 10' x 15' footprint and a base to top of roof-pitch height of 11'. 1 Link to comment Share on other sites More sharing options...
Indomitable026 Posted May 17, 2013 Share Posted May 17, 2013 Thought it would make a nice change and an introduction to 7mm scratchbuilding to have a crack at a building for the future layout. The subject is the Wenford Bridge Goods Depot. ScreenHunter_01 May. 17 18.54.jpg I've used the Gimp software to correct the perspective and put a grid over the top set at 6" centers. I've done a bit of working out and the building appears to have a 10' x 15' footprint and a base to top of roof-pitch height of 11'. Can you work out the frame size of the bicycle using that fancy software? Link to comment Share on other sites More sharing options...
RMweb Gold Stubby47 Posted May 17, 2013 RMweb Gold Share Posted May 17, 2013 Did bikes have drop handlebars prior to 1948 ? Looks like a photoshopped fake to me... Link to comment Share on other sites More sharing options...
John K Posted May 17, 2013 Share Posted May 17, 2013 The drop handle bar design was certainly extant in the 1920s - see http://classiccycleus.com/home/repair/bikes/ ...and the Southern Railway sign may well have still been attached to that building way into the BR era. Best, John Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 Looking at various photos of the building it looks to me as though it has a cement render finish for the main structure. My plan is to make up the main box structure from plasticard, give it a coat of paint and then sprinkle on a good layer of talc to give it some texture. What have others done in this scale for a similar finish? The other question I have regards the roofing material. This looks to me like corrugated asbestos sheeting. There's 10 strips of this along the length of the building and I'm guessing each is 18" wide, giving a building length of 15', which feels about right to me. So the question is, who makes this sort of corrugated sheet in 7mm? Any help appreciated. Link to comment Share on other sites More sharing options...
cromptonnut Posted May 18, 2013 Share Posted May 18, 2013 You can get a printed version: http://www.railwayscenics.com/asbestos-roofing-in-7mm-ft-o-scale-p-201.html?pID=201 or apparently the Ambis 4mm corrugated iron sheeting will fit: http://www.ambisengineering.co.uk/EIW.pdf Link to comment Share on other sites More sharing options...
RMweb Gold Worsdell forever Posted May 18, 2013 RMweb Gold Share Posted May 18, 2013 I've used the Gimp software to correct the perspective and put a grid over the top set at 6" centers. I've done a bit of working out and the building appears to have a 10' x 15' footprint and a base to top of roof-pitch height of 11'. I thought it was taken through a wire mesh fence... You can get a printed version: http://www.railwayscenics.com/asbestos-roofing-in-7mm-ft-o-scale-p-201.html?pID=201 or apparently the Ambis 4mm corrugated iron sheeting will fit: http://www.ambisengineering.co.uk/EIW.pdf Different type of sheet, it's this type as seen on the sides of WW2 prefabs - less corrugations = less material, hopefully still strong enough. Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 I thought it was taken through a wire mesh fence... Different type of sheet, it's this type as seen on the sides of WW2 prefabs - less corrugations = less material, hopefully still strong enough. Always the comedian Paul! Looking again at the roof pictures this morning, I'm now wondering if it could actually be a felt roof with wooden batons. Not sure... There seems to be a horizontal seam about 2/5ths up the roof, just about the stove pipe. This, in my mind, is perhaps a lap in the roofing material and the thickness of the lap looks too thin for a asbestos sheet. I've also just noticed that the roof panel around the stove pipe looks like it could be metal sheet. If it were asbestos, then the closest profile I can find is the 'Bantile' found at the bottom of this web page. Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 You can get a printed version: http://www.railwayscenics.com/asbestos-roofing-in-7mm-ft-o-scale-p-201.html?pID=201 or apparently the Ambis 4mm corrugated iron sheeting will fit: http://www.ambisengineering.co.uk/EIW.pdf I'm not sure I could get away with using printed papers for a corrugated material in 7mm - a bit too flat. I like the Ambis sheet though - it will be ideal for corrugated iron on another project in the wings.... Regarding corrugated metal profiles - I've just found this very useful site. 1 Link to comment Share on other sites More sharing options...
Torr Giffard LSWR 1951-71 Posted May 18, 2013 Share Posted May 18, 2013 ....mornin' Chris....I've a feeling that this style of roofing was asbestos. ATB Dave Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 ....mornin' Chris....I've a feeling that this style of roofing was asbestos. ATB Dave Mornin' Dave... Something like this??? Link to comment Share on other sites More sharing options...
RMweb Gold Donw Posted May 18, 2013 RMweb Gold Share Posted May 18, 2013 Those do look like asbestos panels that I have seen on Prefabs. If these were either 6ft or 8ft sheets there would be a horizontal overlap. Platiscard with suitable strips running down? Don Link to comment Share on other sites More sharing options...
Torr Giffard LSWR 1951-71 Posted May 18, 2013 Share Posted May 18, 2013 Mornin' Dave... Something like this??? asbbantile.jpg ...looks good Chris...I seem to remember that the joins were just as the ridges curved back towards the roof...that allowed for an overlap with a turned in/down join. Dave Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 ...looks good Chris...I seem to remember that the joins were just as the ridges curved back towards the roof...that allowed for an overlap with a turned in/down join. Dave The ridges in the photo do appear very square though.... Link to comment Share on other sites More sharing options...
Torr Giffard LSWR 1951-71 Posted May 18, 2013 Share Posted May 18, 2013 ...the overlaps/joins may just be on the far side of the ridges to the camera. Such rooves certainly weren't formed of one piece of asbestos on each side of the apex...that would be much too fragile and a nightmare to position and secure in breezy conditions. Dave Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 ...the overlaps/joins may just be on the far side of the ridges to the camera. Such rooves certainly weren't formed of one piece of asbestos on each side of the apex...that would be much too fragile and a nightmare to position and secure in breezy conditions. Dave Trouble is finding a good quality images of the building - this is a crop of one of the few showing the other side of the depot. Not clear... Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 My first thought was that it is a batten and felt roof....but im only on a small screened lap-top so dont take my word for it Just re-gone through my pile of reference books and all the corrugated types (iron and asbestos) on other localish buildings are a more typical close spaced ridge and trough. The other roofs that have a similar appearance are clearly batten and felt. I'm 50/50 at the moment - but can feel the start of leanings towards batten and felt the more research I do. The colour does seem to be lighter though. Could really do with a better photo! Link to comment Share on other sites More sharing options...
Indomitable026 Posted May 18, 2013 Share Posted May 18, 2013 I've found you a reference shot from the Bodmin - Wenford line http://www.flickr.com/photos/372paul/5866103447/ Enjoy and hope it is of interest Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 Ok, based on the fact that decent colour photos and scale plans always turn up after you've asked and done loads of research.... I'm now going to trick Sod's Law and pretend that the build has been finished and it's way, way too late alter anything! Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 The felt on the North side of my shed roof isn't that dissimilar to the colour of the asbestos roof of the barns at the farm next door, he said looking outta the window The felt roof in our garden is covered in tree and so is a completely different colour - green. I've found you a reference shot from the Bodmin - Wenford line http://www.flickr.com/photos/372paul/5866103447/ Enjoy and hope it is of interest Will be a massive help, thanks D. Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 The following building, also being drawn up, whilst I have all the kit out, is one of these ground frame huts. I believe there where two in the Boscarne Jct area... and another at Grogley. The design seems standard, even down to the door being on the same side. Looks to me like around 6" spacing on the planking and a tiled roof? Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 Ok, out with the knives, MEK and plastic sheet. Let's see what I can get done today. Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 Although I'm familiar with my seven times table, I keep finding that my brain has become conditioned to convert sizes into 4mm. After a couple of near misses on the 'ooops, wrong size' front I've made myself a handy converter sheet... I doubt I'll be working to 2 decimal places but I find the extra digits helpful in working how close to the whole mm I need to be! 3 Link to comment Share on other sites More sharing options...
RMweb Premium 2ManySpams Posted May 18, 2013 Author RMweb Premium Share Posted May 18, 2013 Oh, by changing the number in cell A1, it can be used for any scale... Link to comment Share on other sites More sharing options...
Recommended Posts