PaulCheffus

Hi Are they the sidings at Dunford East? Cheers Paul

Hi Usually but not always. Our supplier did an over the air update to our meters and the monitor stopped working plus the usage was not being uploaded to them. It took around four months to sort out as it was at the start of the pandemic in 2020 and required an engineer visit. We were switched back to manually uploading our readings for that period. Cheers Paul

Hi I make my own bread buns using the bread machine to make the dough as the bought buns give me stomach ache (could be the preservatives they add). Ours is a Panasonic SD-254 which we’ve had for years. Cheers Paul

Hi My wife's car does this automatically when the phone is connected via bluetooth. Cheres Paul

Hi Probably been designed for the pins used by Dapol however the pins on the Farish ones are smaller. Cheers Paul

Hi They will appear as soon as I finish my rake. 0001 & 0007 0002 0014 0018 0033, 0035 & 0040 Just need the barrels painting white and the transfers printing once I’ve finished the artwork. Cheers Paul

Hi Although I would like some in N I doubt they would do these. Only 17 built and a limited route between Immingham and Anglesey. Cheers Paul

Hi When I did my jury service a while ago the judge didn’t tell us anything and we were left to make up our own minds. Cheers Paul

Hi I've reloaded these images to a new gallery link below as the old gallery is no longer accessible. Cheers Paul

Hi One of the reasons a footbridge was built adjacent to this crossing and has been there since at about 2015. They recently built another footbridge near the university to cover the level crossing there. Cheers Paul

Hi That looks very good. I’ve got a pair of these under construction and the body and chassis are basically complete. I am now at the detailing stage and wondered what you have used for the gangways on the ends. Cheers Paul

Hi The postman has delivered several of these to us in the last few days. I’ve posted them back blank as I don’t appreciate aggressive marketing and the subject matter of this one is upsetting as I recently lost one of my parents. Cheers Paul

Hi I have one of these to build so I am looking forward to seeing how you tackle this. Cheers Paul

Hi Like this? Cheers Paul

Hi I’ve also found a 1mm milling cutter does a similar job but leaves the hole with a square bottom rather than the drill shape. Cheers Paul

Hi As far as I am aware they only ran between Immingham and Anglesey and there were only 17 built. Cheers Paul

Hi Saw two people today within minutes of each other both driving whilst on their mobile phones. The higher fines and points don’t seem to deter them. Cheers Paul

Hi Well they failed in my case as my plate has my initials on it. Plate bought direct from the DVLA in June 2015. Cheers Paul

Hi My 1/148 scratchbuilt version, however I have no idea how much it cost me to do. I completed the first just as Dapol announced the RTR version and I had the second finished before their release. Cheers Paul

Hi I assume that also includes the Plate wagon chassis. Cheers Paul

Hi Would the drawings be resealable to 1/148 as I also would like a rake of these wagons for my Woodhead based layout. I do have a 3D printer so could print the items from the design. Cheers Paul

Hi There is always the Worsley Works kit. Cheers Paul

Hi 2mm scale association part number Cheers Paul

Hi Try a few known nut sizes on the screw you have, one of them should fit unless they have used an obscure thread. Cheers Paul

Hi Thanks for the reply and I’ve finally got mine working. It would appear that the lighting decoders are not compatible with Railcom as turning that off in the command station allowed the lights to toggle with F0 and change with direction. Switching Railcom back on causes the lights to malfunction again. The reason for asking about the light arrangement is that I get red at one end and white plus red at the other. This also occurs on DC. I took my driving trailers apart so I could see where the contacts were in relation to the decoder and all looks fine. Cheers Paul