Jump to content
 

PaulCheffus

RMweb Premium
 View Profile  See their activity

  • Posts

    2,020

  • Joined

  • Last visited

 Content Type 

Everything posted by PaulCheffus

  1. PaulCheffus
    Hi While the body is accurate the chassis on the CCT is not as for example the W -Irons have been stretched vertically. I rebuilt mine with a scratchbuilt chassis Cheers Paul
  2. PaulCheffus
    Hi These might be useful for the board joints https://www.modeltech.uk/ Cheers Paul
  3. PaulCheffus
    Hi Mine are a hybrid of Worsley Works kits, 2mm SA parts and my own castings. Cheers Paul
  4. PaulCheffus
    Hi If taken with an Apple device then it depends on the orientation of the device when you took the photo. Try it with the device at 180 degrees to whatever orientation you used last time. Cheers Paul
  5. PaulCheffus
    Hi Clive Depending on which model cutter you have you may be able to scribe the doors on or are you already doing that. Cheers Paul
  6. PaulCheffus
    Hi The holes from memory are just below each light (the raised diamond shaped area) Cheers Paul
  7. PaulCheffus
    Hi Absolutely nothing. Cheers Paul
  8. PaulCheffus
    Hi Therein lies the issue, I would like Accurascale to introduce an N gauge range, however, there currently isn’t anything in the OO range that interests me. Cheers Paul
  9. PaulCheffus
    Hi More effort required plus they need to find the same model, colour they want to use. The internet is much easier. Cheers Paul
  10. PaulCheffus
    Hi No connection with the seller but just noticed this Cheers Paul
  11. PaulCheffus
    Hi For making dough for bread buns I use very strong Canadian bread flour as I find it produces a dough that isn’t sticky and will all come out of the pan. For loaves of bread I use very strong bread flour as it’s baked in the pan. Cheers Paul
  12. PaulCheffus
    Hi Should that be sent to the parts email address? Cheers Paul
  13. PaulCheffus
    Hi I used Vallejo paint when I did my master and the rivets came out very well on the finished item. Cheers Paul
  14. PaulCheffus
    Hi This is how I fixed mine Cheers Paul
  15. PaulCheffus
    Hi I keep getting this advert at the top of the page. I’m using iPad iOS 16.2 and the default 2021 theme. Cheers Paul Edit I’ve just realised this appears when I roll over an embedded advent in the thread like this one
  16. PaulCheffus
    Hi i completely missed those, just had a look and there are three in there. Cheers Paul
  17. PaulCheffus
    Hi I’d buy a lot more than two. Cheers Paul
  18. PaulCheffus
    Hi Mine were all yellow with the green SYP. Cheers Paul
  19. PaulCheffus
    Hi Andy A question if I may. Why aren’t the technical people doing all this on a test system then moving it to live once it’s working? Cheers Paul
  20. PaulCheffus
    Hi How many mini roundabouts have you seen that are correctly marked? In the town near me I think there are two. All the others either have all entrances as give way or all single broken lines. Cheers Paul
  21. PaulCheffus
    Hi Mine worked from the start with the headlights directional on F0 and the taillights on F1 (CO end) and F2 (BO end). Try doing a reset on the decoder first to see if you can get the same as the above. When I get the chance I will take a proper look at the manual and see if I can work out what needs doing with the CVs to get F1 to operate the tail lights so they are directional. Cheers Paul
  22. PaulCheffus
    Hi This is the manual for the Zimo decoders and the Bachmann decoder is basically the MX618N18 http://www.zimo.at/web2010/documents/DecoderSmall_151215_E.pdf The manual supplied with the loco is irrelevant in this case as this is a non DCC loco that has been fitted with a Bachmann decoder. Cheers Paul
  23. PaulCheffus
    Hi I’ve fitted the same in mine. Mine has directional headlights on F0 and tail lights on F1 or F2 depending on which end of the loco you are looking at. F2 for the taillight causes an issue though and the loco won’t move whilst F2 is on which I think is down the brake function as it appears to be on F2. Reading the manual for the decoder I think it’s possible to put the taillights on F1 and also to be directional but I’ve not had time to try this yet. Cheers Paul
  24. PaulCheffus
    Hi Off topic but my antibody level was at a higher level (as recorded by the ONS) from December 2021 when I had my booster until September 2022 when I had my next booster so no real decline over ten months. My wife who was vaccinated at the same time was also at the higher level for the same period. Cheers Paul
  25. PaulCheffus
    Hi I used Mig Ammo Ultra Glue to secure my discs. I also painted two of the closed ones with Phoenix Precision BR Loco Green post 54 which seems to be a good match to the Rapido green. Cheers Paul
×
×
  • Create New...