Ruston Posted January 12, 2021 Share Posted January 12, 2021 Just now, Islesy said: Hello Dave, hope you're keeping well? The canopy shewn is merely the first EP plain one, with a more detailed 'lumpy' version currently being worked on... I am still breathing at least. Good to know that it's a moulding, anyway. I always thought the fabric covers on Bachmann's Clay Hoods were awful. 2 Link to post Share on other sites More sharing options...
Mophead45143 Posted January 12, 2021 Share Posted January 12, 2021 Certainly didn't see this one coming! As I understand, the very similar Coil B used the same underframe as the MDV, so I assume these did too. In which case it makes a lot of sense for Accurascale to do them if they're already producing the underframe. Coil B on the way later perhaps...?! Top marks to tackle an unusual prototype! I will definitely be getting a pack or two to run in mixed freights / steel trains whenever I get my 1970's layout underway! Cameron 2 1 Link to post Share on other sites More sharing options...
Fredo Posted January 12, 2021 Share Posted January 12, 2021 Hi, liked the choice of new wagon today, are you considering making some new coils that fit in as the existing ones are too big. Thanks Fred Link to post Share on other sites More sharing options...
JSpencer Posted January 12, 2021 Share Posted January 12, 2021 For me, this is the sort of wagon that might sell well in single units. It's an odd beast that would look great by itself on a layout 2 Link to post Share on other sites More sharing options...
Fat Controller Posted January 12, 2021 Share Posted January 12, 2021 1 minute ago, JSpencer said: For me, this is the sort of wagon that might sell well in single units. It's an odd beast that would look great by itself on a layout Indeed. Not all coil workings were block trains to large industrial sites. An example that might have used Coil A was a couple of wagons of coil from BSC Gartcosh to Hafod Full-Load Terminal, Swansea. The coils were then taken to Signode at Waunarllwyd for processing into metal banding; used, amongst other things, to secure coiled steel. 3 1 Link to post Share on other sites More sharing options...
hmrspaul Posted January 12, 2021 Share Posted January 12, 2021 Note that despite them being a rather regional wagon I did record one for repair at Horwich works. https://PaulBartlett.zenfolio.com/brcoila/e1d129531 The Coil B has been mentioned. Our drawings have been offered and one that has wider geographical use, although they ended up working with the Coil A. I'll admit a wagon type that I was hopeful would be produced when we started publishing drawings - rather less well known than many but with some play value. Paul 4 2 Link to post Share on other sites More sharing options...
Adam Posted January 12, 2021 Share Posted January 12, 2021 Well, that *is* a pleasant surprise! Fantastic news. Adam 1 Link to post Share on other sites More sharing options...
MRDBLUE17 Posted January 12, 2021 Share Posted January 12, 2021 Hi Fran, Didnt see this one coming and looks like another very nicely detailed wagon. I possibly saw them when I was very young at Hamworthy but I don’t remember them. I know they use to run in fairly large numbers with imported Coil to Swindon in the early 80’s from photos I’ve seen. Whilst these are too early for me the focus on steel wagons does bode well for the future if the later bogie types appear! Cheers Mark 4 Link to post Share on other sites More sharing options...
RMweb Gold farren Posted January 12, 2021 RMweb Gold Share Posted January 12, 2021 Sorry forgive my ignorance, would these ever have been in mixed freight with a steam loco at the head? Or would they have been more block/ mixed steel work with a Diesel. 1 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted January 12, 2021 RMweb Gold Share Posted January 12, 2021 3 hours ago, Accurascale Fran said: Hi Brian, Ask and ye shall receive! https://accurascale.co.uk/collections/coil-a/products/coil-a-wagon-bundle Cheers, Fran What are the arrangements re exporting to the EU for those of us cast adrift? Mike. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold Accurascale Fran Posted January 12, 2021 Author RMweb Gold Share Posted January 12, 2021 1 minute ago, Enterprisingwestern said: What are the arrangements re exporting to the EU for those of us cast adrift? Mike. Hi Mike, VAT is automatically removed from the website for those living in the EU and you will pay locally on arrival. There is no duty on model trains so you will not face charges there. HTH Fran 2 2 Link to post Share on other sites More sharing options...
Fat Controller Posted January 12, 2021 Share Posted January 12, 2021 16 minutes ago, farren said: Sorry forgive my ignorance, would these ever have been in mixed freight with a steam loco at the head? Or would they have been more block/ mixed steel work with a Diesel. When they were delivered, steam had about four years to run in South Wales, and more than that elsewhere. They could easily have turned up as one or two wagons in a mixed freight, hauled by a steam loco. A rather skanky 'Grange' or 8F would look lovely with a couple of these intermingled between a mixture of other types. 6 Link to post Share on other sites More sharing options...
mike knowles Posted January 12, 2021 Share Posted January 12, 2021 Will they be suitable for conversion to P4? Link to post Share on other sites More sharing options...
RMweb Gold McC Posted January 12, 2021 RMweb Gold Share Posted January 12, 2021 9 minutes ago, mike knowles said: Will they be suitable for conversion to P4? Absolutely, drop in convertible, with P4/EM brake gear in the accessory bag. 4 1 Link to post Share on other sites More sharing options...
iak Posted January 12, 2021 Share Posted January 12, 2021 Well then... These will look nice behind a Class 37... 1 Link to post Share on other sites More sharing options...
RMweb Gold Accurascale Fran Posted January 12, 2021 Author RMweb Gold Share Posted January 12, 2021 Hi everyone, A bit of prototype inspiration for you courtesy of Mr. Dedman on Flicr They were later given through air pipes and recoded SFWs as recorded here by the Gent of Leisure (our lovely tipplers alongside!) They ran mixed with other tarped coil beauties of the period, as seen here by David Flitcroft Will dig out some more! Cheers, Fran 14 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted January 12, 2021 RMweb Gold Share Posted January 12, 2021 (edited) On 12/01/2021 at 18:45, Accurascale Fran said: They ran mixed with other tarped coil beauties of the period, as seen here by David Flitcroft Will dig out some more! Cheers, Fran Interesting with a class 50 on it. Edited May 12, 2021 by adb968008 2 1 Link to post Share on other sites More sharing options...
mike knowles Posted January 12, 2021 Share Posted January 12, 2021 1 hour ago, McC said: Absolutely, drop in convertible, with P4/EM brake gear in the accessory bag. That's brilliant, many thanks. Pack C ordered. 1 Link to post Share on other sites More sharing options...
RMweb Gold farren Posted January 12, 2021 RMweb Gold Share Posted January 12, 2021 4 hours ago, Fat Controller said: When they were delivered, steam had about four years to run in South Wales, and more than that elsewhere. They could easily have turned up as one or two wagons in a mixed freight, hauled by a steam loco. A rather skanky 'Grange' or 8F would look lovely with a couple of these intermingled between a mixture of other types. Thank you, I can run mine happy when they arrive. 1 Link to post Share on other sites More sharing options...
rorz101uk Posted January 12, 2021 Share Posted January 12, 2021 I’ve just moved house before Xmas, want to buy a class 37 and another pack of HOP wagons! Than there’s the 21ton mineral wagon and now this! Plus I’ve got to find the money to do the model railway room in the garage! Well done AS! Now where’s the steam engine to go with these Pre TOPS wagons 1 1 Link to post Share on other sites More sharing options...
JSpencer Posted January 12, 2021 Share Posted January 12, 2021 (edited) 5 hours ago, Accurascale Fran said: Hi Mike, VAT is automatically removed from the website for those living in the EU and you will pay locally on arrival. There is no duty on model trains so you will not face charges there. HTH Fran Sounds complicated as a system. So I wonder if this means that the delivery man turns up and asks for a cheque for the VAT before leaving you with a parcel! And what about stuff ordered and paid for last year but not yet sent out and recieved? Edited January 12, 2021 by JSpencer Link to post Share on other sites More sharing options...
bazjones1711 Posted January 12, 2021 Share Posted January 12, 2021 Just need to do the BNX bogies coil wagon and BVW bogie coil wagons ( not sure of their pre decimal codes ) , the covered ones worked with coil A and coil B from South Wales , the BNX and BVW moved North and the covers were removed working out of Grimsby to Sheffield with imported stainless steel coil . These lasted in to the early 1990's 3 Link to post Share on other sites More sharing options...
RMweb Gold Accurascale Fran Posted January 12, 2021 Author RMweb Gold Share Posted January 12, 2021 12 minutes ago, JSpencer said: Sounds complicated as a system. So I wonder if this means that the delivery man turns up and asks for a cheque for the VAT before leaving you with a parcel! And what about stuff ordered and paid for last year but not yet sent out and recieved? Hi John, This is how it works coming from any non EU country into an EU country and one of the results of the UK leaving the EU. This is the same for any goods. As that VAT is paid already and the transaction is pre transition it will be declared so on anything sent out. However, things are such a mess right now it’s a situation we’re continually monitoring for more information. Once there is clarity affected customers will be contacted. Cheers! Fran 2 2 Link to post Share on other sites More sharing options...
bazjones1711 Posted January 12, 2021 Share Posted January 12, 2021 Class 37284 at Newport in the late1980's BVW bogie coil followed by SFW and SGW coil wagons , possibly a Swindon to Margam working M . Russell photo 7 Link to post Share on other sites More sharing options...
jjnewitt Posted January 12, 2021 Share Posted January 12, 2021 Interesting choice of prototype. Looking at those prototype photos it's very noticable that no two hoods are the same. Can the model be done with each side different perhaps so that they don't all look identical? A rake would look fairly unrealistically if they were all exactly the same. Looking at the EP the bend in the hood at the side doesn't match where the impression of the tarp bar is which looks really odd to me. Justin 1 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now