NickL2008 Posted March 11, 2019 Share Posted March 11, 2019 9 hours ago, John M Upton said: A question. Thinking ahead to a possible future project and given how bargain binable the early releases of Oxford's Mk3s have been, how suitable do you think they would be for a Class 442 conversion project? Doable John, but the Roof vents would be wrong and probably the underframes, unless you dont really care about any of that NL 1 Link to post Share on other sites More sharing options...
Sir TophamHatt Posted March 11, 2019 Share Posted March 11, 2019 On 25 February 2019 at 10:03, Legend said: ... Accurascale mk5s @£225 for 5 . Great value . Define "great value". £45 for a coach isn't what I'd call great. 1 Link to post Share on other sites More sharing options...
RMweb Premium Legend Posted March 11, 2019 RMweb Premium Share Posted March 11, 2019 (edited) 2 hours ago, Sir TophamHatt said: Define "great value". £45 for a coach isn't what I'd call great. Its better than £66 for a 2f or £81 for a dbso, £55 for a Thompson or £69 for an Autocoach. Plus the spec is good . This is not a Railroad Mk1 or2 Edited March 11, 2019 by Legend 1 3 Link to post Share on other sites More sharing options...
Wild Boar Fell Posted March 11, 2019 Share Posted March 11, 2019 On 10/03/2019 at 14:26, John M Upton said: A question. Thinking ahead to a possible future project and given how bargain binable the early releases of Oxford's Mk3s have been, how suitable do you think they would be for a Class 442 conversion project? Not too difficult to match the resin casting off ebay to the Oxford body profile, takes some filler and work. 2 2 Link to post Share on other sites More sharing options...
RMweb Premium John M Upton Posted March 11, 2019 RMweb Premium Share Posted March 11, 2019 Thanks. I might give a try at some point. 1 Link to post Share on other sites More sharing options...
black and decker boy Posted March 11, 2019 Share Posted March 11, 2019 (edited) The reviewer in Modelrail 259, Richard Foster, has given these a +ve review and thinks the colours are “excellent” His only slight comment is that the upper grey band is “a touch on the dark side” he clearly opted to not compare them side by side with the BM 47/7 and DBSO which he recommends you run them with. we perhaps shouldn’t be too surprised. Edited March 11, 2019 by black and decker boy 2 2 Link to post Share on other sites More sharing options...
RMweb Premium Legend Posted March 12, 2019 RMweb Premium Share Posted March 12, 2019 (edited) 5 hours ago, black and decker boy said: The reviewer in Modelrail 259, Richard Foster, has given these a +ve review and thinks the colours are “excellent” His only slight comment is that the upper grey band is “a touch on the dark side” he clearly opted to not compare them side by side with the BM 47/7 and DBSO which he recommends you run them with. we perhaps shouldn’t be too surprised. Which is a cop out I’d say . If he had compared them to 47 and dbso he would have found differences . However the model railway press just don’t like saying anything negative about new products . This is the case in point . No doubt the dbso and 47 were reviewed and no issues seen and now the Mk3s which are clearly a different shade . So which is it..............oh no doubt it was another reviewer that did the test on the dbso . Let’s call them out. Come on given the different shades which one is right? Edited March 12, 2019 by Legend 4 Link to post Share on other sites More sharing options...
GordonC Posted March 12, 2019 Share Posted March 12, 2019 16 hours ago, black and decker boy said: The reviewer in Modelrail 259, Richard Foster, has given these a +ve review and thinks the colours are “excellent” His only slight comment is that the upper grey band is “a touch on the dark side” he clearly opted to not compare them side by side with the BM 47/7 and DBSO which he recommends you run them with. we perhaps shouldn’t be too surprised. maybe someone should recommend he goes to specsavers too 1 1 3 Link to post Share on other sites More sharing options...
ThaneofFife Posted March 21, 2019 Share Posted March 21, 2019 On 12/03/2019 at 02:48, Legend said: Which is a cop out I’d say . If he had compared them to 47 and dbso he would have found differences . However the model railway press just don’t like saying anything negative about new products . just like most facets these days. say something other than positive and you rattle the cages of all the now easily offended snowflakes we seem to now have to tread carefully around...... 1 2 Link to post Share on other sites More sharing options...
QuoitsPlayer Posted March 24, 2019 Share Posted March 24, 2019 Jeffersons 'The Train Shop' in Scarborough had the SO and FO in stock for approxmately £31.99 yesterday (23/3/19) if this is any help to anyone looking for either the ScotRail or Intercity Mk3s - I have no connection to the business but called in yeterday and found them in a back cabinet together with a few other hard to find items. Link to post Share on other sites More sharing options...
GEOEng03 Posted March 28, 2019 Share Posted March 28, 2019 HI, I just wondered if anyone knew if Oxford were going ahead with the Virgin Mk3a?! The website has them missing, which may suggest they have done so. Shame if they had... But may be due to the Hornby ones being in stock still?! http://oxfordrail.com/76/OR76MK3.htm Cheers Link to post Share on other sites More sharing options...
Ouroborus Posted April 24, 2019 Share Posted April 24, 2019 Stobarts have landed. Collets models seem to be the cheapest 1 Link to post Share on other sites More sharing options...
Tiddles47 Posted June 6, 2019 Share Posted June 6, 2019 OR have released details of a new twin pack of TSO's. While I admit this is a good idea, the numbers are 12015 and 12030. Why couldn't they change the other 12015 to another number?? Seems like an own goal? 1 Link to post Share on other sites More sharing options...
No Decorum Posted June 6, 2019 Share Posted June 6, 2019 1 hour ago, Tiddles47 said: OR have released details of a new twin pack of TSO's. While I admit this is a good idea, the numbers are 12015 and 12030. Why couldn't they change the other 12015 to another number?? Seems like an own goal? Odd. Hatton’s quotes 12015 but Kernow 12014. Link to post Share on other sites More sharing options...
apollo 079 Posted June 6, 2019 Share Posted June 6, 2019 E-mail from Oxford confirms it will be 12014 and 12030 (in ScotRail). 1 1 Link to post Share on other sites More sharing options...
turbos Posted June 6, 2019 Share Posted June 6, 2019 I’m quite pleased with this announcement as I held back from buying multiple ScotRail TSOs as Oxford had said they’d produce more with different numbers if they sold well, I’ve already got my order in for this pair. 1 Link to post Share on other sites More sharing options...
JohnC Posted June 7, 2019 Share Posted June 7, 2019 Very easy to renumber with the superb Railtec transfers. I rubbed the old numbers off with a cotton bud and Brasso, less than 2 minutes a coach. I am just completing my respraying into executive light grey and my coaches now perfectly match my Bachmann DBSOs - also renumbered by Railtec Decals. John 2 Link to post Share on other sites More sharing options...
James90012 Posted July 30, 2019 Share Posted July 30, 2019 Advice time I tried to change the couplings and the springs ended up out of place. Getting them back in was tricky but now the small screws that hold the seating plastic to the chassis aren't gripping. Has anyone else had this issue and recommend a solution? It's critical because the seating plastic keeps the coupling mechanism in place, otherwise it hangs low. These really are such poor build quality, I ordered Hornbys latest virgin MK3s because I was so disheartened with these. Thanks in advance 1 Link to post Share on other sites More sharing options...
RMweb Gold Patriot87003 Posted July 30, 2019 RMweb Gold Share Posted July 30, 2019 Hi James90012, I fitted lights to my rake of Oxford Mk3’s and also had a few problems when reassembling. Three suggested options: 1) Add a drop of super glue to the plastic hole, leave it to set, then reassemble using the original screw: It should now ‘bite’ into the the plastic+glue and re-thread itself. This will allow un-screwing at a later date. 2) Could find a slightly larger screw and reassemble, again it should re-thread itself and be able to un-screwed later, however finding a slightly larger screw that isn’t too big can often be a challenge (Sod’s law principle!) 3) Carefully glue together to form a permanent bond - although by nature, difficult to take apart in future. I used a combination of 1 and 2 (as I was lucky to have some spare screws) and have had no problems since. I actually like the Oxford Mk3’s, especially once a bit of improvement work is carried out, but do agree that they could have been engineered and finished a bit better. Hope this helps and good luck with your Mk3’s. Link to post Share on other sites More sharing options...
Roddy Angus Posted July 30, 2019 Share Posted July 30, 2019 Hi James90012 The easiest solution I have found is to remove the screws holding the ballast weights in place, gluing the weights instead, and then use those screws to secure the seating plastic ends. They have a far better grip and keep everything in place. One suggestion if you go down this route is be careful how far you tighten them, make sure that the self centring mechanism still works. Loosening the screw very slightly can make a big difference to the smoothness of the self centring mechanism. I would also suggest adding a small amount of super glue to both ends of the springs in the self centring mechanism. This helps hold them in place and stops them disappearing if you are taking the coach apart. I have made these changes to about 20 coaches and they work well. Sometimes after a while the self centring mechanism tightens up but it is easy to simply loosen the screw slightly if that happens. Best wishes Roddy 1 1 Link to post Share on other sites More sharing options...
turbos Posted August 1, 2019 Share Posted August 1, 2019 On 30/07/2019 at 20:52, James90012 said: Advice time I tried to change the couplings and the springs ended up out of place. Getting them back in was tricky but now the small screws that hold the seating plastic to the chassis aren't gripping. Has anyone else had this issue and recommend a solution? It's critical because the seating plastic keeps the coupling mechanism in place, otherwise it hangs low. These really are such poor build quality, I ordered Hornbys latest virgin MK3s because I was so disheartened with these. Thanks in advance The only rtr alternative to the Oxford Mk3a is the Jouef Mk3a, Hornby have only ever made HST Mk3 trailers. There’s a myriad of detail differences between the loco hauled and HST version. The Oxford build quality isn’t the best but this is reflected in the price. All easily rectified using some basic modelling material, as explained above. Brian. 2 Link to post Share on other sites More sharing options...
Cbpete Posted October 24, 2019 Share Posted October 24, 2019 I emailed Oxford rail asking if they are any further on with the licence for the virgin west coast livery as it’s been nearly 2 years since they announce them. Also about the HST versions of the coaches, email back from them saying still waiting for licence and that they never said they were making the HST versions but to watch this space. I am sure in their original info it said they were making them and along with the drawing of the mk3 body with the different variants showed a TGS, also a photos of 5 coaches in a display case shows them to be HSTs, as the roof clearly shows the space were the square roof vent goes and no grab handle on the end of the coach. Or am I just imagining it as I can not find a link anymore to the original press release. Link to post Share on other sites More sharing options...
wombatofludham Posted October 24, 2019 Share Posted October 24, 2019 I get the impression Oxford are back tracking on a lot of things at the moment, their die-cast range has slowed up and they most definitely did say they were going to release HST versions of the Mk3 and showed initial drawings showing they had correctly incorporated the differences. The news on the Virgin stock is disappointing as I was hoping to assemble a rake for the last days of loco hauled Mk3s in 2005. There again, "Kit-Kat" liveried Mk3s did run without the "Virgin" logo for a while so if it is that which is delaying the release why not put out the de-branded versions? 1 Link to post Share on other sites More sharing options...
RMweb Premium DRS Crewe On A Mission Posted October 24, 2019 RMweb Premium Share Posted October 24, 2019 2 hours ago, wombatofludham said: I get the impression Oxford are back tracking on a lot of things at the moment, their die-cast range has slowed up and they most definitely did say they were going to release HST versions of the Mk3 and showed initial drawings showing they had correctly incorporated the differences. The news on the Virgin stock is disappointing as I was hoping to assemble a rake for the last days of loco hauled Mk3s in 2005. There again, "Kit-Kat" liveried Mk3s did run without the "Virgin" logo for a while so if it is that which is delaying the release why not put out the de-branded versions? I don't know much about the Oxford Rail MK3s except that the Stobart Rail MK3 has been released earlier this year. I would really like a rake of Chiltern liveried MK3s that work with the Class 68s. Hornby haven't produced these yet, so that could be a really good product to announce by Oxford, especially considering Dapol have produced three Class 68s in Chiltern livery and with them mostly running with said MK3s they don't currently have much to run with in OO Gauge. Link to post Share on other sites More sharing options...
NIRCLASS80 Posted October 24, 2019 Share Posted October 24, 2019 When released they also said that Irish Rail ones would follow but still waiting. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now