RMweb Premium Sasquatch Posted November 1, 2014 Author RMweb Premium Share Posted November 1, 2014 Greetings Jock mate.... Am itching to get the track down on those base boards, just don't seem to be able to find the time especially now I'm behind with work! When I have caught up there has been a change of plan involving the garage doors.Mrs. S. suggested I make new ones which fold outwards. (She's rather clever, my wife. I always run things by her because she is full of bright ideas). My original idea was to remove them completely and replace with stud wall with insulation, drywall and siding but this would increase our yearly property taxes so that's a no no. We have a real spider problem. There was a black widow building a nest in there the other day again. So it's kind of priority before I go building things in there permanently. Regards Shaun. 2 Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted November 1, 2014 Author RMweb Premium Share Posted November 1, 2014 With a few hours spare last night I decided to build a brake van kit. This is the Parkside midland one. Hardly ever one to build things as the instructions imply I always try to find what else can be made from the parts in the box. I'll not bore you with the general build just the "thinking outside the box" stuff! Some of these vans received diagonal bracing while under British Railways ownership (as per the O gauge kit) so this was chosen for the model. This was made up from 10thou plastic strip and the bolt heads represented by punching holes in the strips. All the molded lamp irons have been chiseled off with a fresh chisel bit in the craft knife. (I actually have 4 of these type knives, one of which always has a chisel bit in it). The holes were drilled for the grab rails, lamp irons & door handles. Then for something different one of the doors has been cut out and glued in the open position. More later 7 Link to post Share on other sites More sharing options...
hornbyandbf3fan Posted November 1, 2014 Share Posted November 1, 2014 Never knew about that kit, might look out for it at Warley. I might pinch some of your ideas as well, especially with the open door and I could have the guard outside Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted November 1, 2014 Author RMweb Premium Share Posted November 1, 2014 (edited) It shouldn't be find too hard to find as Bachmann released this model this year I believe. Edited November 1, 2014 by Sasquatch Link to post Share on other sites More sharing options...
hornbyandbf3fan Posted November 1, 2014 Share Posted November 1, 2014 I have the model funnily enough, it's on my workbench waiting to be weathered. I'd still like to build the kit, just with the detail differences 1 Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted November 1, 2014 Author RMweb Premium Share Posted November 1, 2014 Here's the other Parkside version (PC49). Bog standard kit, came out ok. This one's my favorite, should be available from Slaters/Coopercraft. The cheapest way to build stock is put Dapol bodies on under frame kits, like these two. You'll need wheels, top hat bearings and couplings and mounts. cost about 20 quid to build 5! Dapol gunpowder body on detailed Cambrian 9' RCH chassis. And their BR body on Parkside under frame. The Red Panda under frame would suit this one too! I will make this version one day myself. 9 Link to post Share on other sites More sharing options...
Doughnut Posted November 2, 2014 Share Posted November 2, 2014 Love the weathering and detail on these wagons Mr. S. Top stuff! (ps Hope you're 'Bigfoot' is getting better) Dave Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted November 2, 2014 Author RMweb Premium Share Posted November 2, 2014 Thanks Dave.I do get more pleasure from running stuff I've built myself.There's more here if you're interested, quite a few scratch builds also! Regards Shaun Link to post Share on other sites More sharing options...
Mrkirtley800 Posted November 2, 2014 Share Posted November 2, 2014 Very nice collection of vehicles there Shaun. Good to see a bit of scratch building. Derek Link to post Share on other sites More sharing options...
Doughnut Posted November 2, 2014 Share Posted November 2, 2014 Very nice stuff indeed! That blue NE Sand covered six plank's a gem! Dave Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted November 2, 2014 Author RMweb Premium Share Posted November 2, 2014 Am happy you enjoyed my gallery guys! So I have neglected all my chores, which isn't unusual for a Sunday morning and got on with the awful task of fitting all the staples/ Grab rails and lamp irons. Some mention has to be made about the challenging nature of this kit in particularly the foot board assembly. What I did here was to separate the hangers from the main sprure first, cut away the center two feed gates to the lower foot board, remove and attach the hangers one at a time and check for alignment with the mini ruler before eyeing them for uniformity. All the staples took ages and the carpet monster must have a stomach ache after gobbling up at least 7. Now ready for the spray booth! 7 Link to post Share on other sites More sharing options...
Jaz Posted November 6, 2014 Share Posted November 6, 2014 (edited) Is the foot better? Liking the work. At this rte rate your going to tempt me into trying one of these kits. you always make the look worthwhile having a go at. Edited November 6, 2014 by Jaz Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted November 10, 2014 Author RMweb Premium Share Posted November 10, 2014 (edited) Yes! Foot is healing up nicely thanks. More madness ensued today in the way of brake van detailing! Well it all started with the open door and something a certain young man in Cornwall said about having the guard outside. These type of vans quite often got shunted into sidings to allow faster traffic to pass leaving the guard with spare time......... to make tea! The portly guard in question comes from the old Airfix civilians set. I trimmed away most of the brim of his hat leaving him with a cap and added a mug of tea from plastic rod. The vans stove is also from bits of tube and rod, the kettle is snippets of plastic and the hand wheel is Cambrian. BB gun pellets have been glued in the long bench to give much needed weight. At first I stuck the chap on the right but realized he was obscuring the view of the interior so moved the blighter over. Roof will be fixed with Hob-E-Tac so that the inside can be admired whenever the desire takes me. Edited November 10, 2014 by Sasquatch 4 Link to post Share on other sites More sharing options...
David Todd Posted November 10, 2014 Share Posted November 10, 2014 Really enjoying your Detailing, "spare time" updates...........Thanks for sharing............ Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted November 10, 2014 Author RMweb Premium Share Posted November 10, 2014 This evening my attention has turned to the station masters house at Queensbury.It, along with the arched plate bridge are the only remnants of the railway left there.The only good view of it is here . It appears to be a very grubby looking cement rendered "L" shaped house. My guess is that the window stile matched that of the station and would be green also. Measurements where taken on Google earth 38' X 30'. I started by plotting the measurements on white foam board, then marked out the windows & doors. I scribed two courses of stonework along the bottom edge and scribed cills and lintels. A picture of the house today from Google Earth street view. 8 Link to post Share on other sites More sharing options...
RMweb Gold Alister_G Posted November 10, 2014 RMweb Gold Share Posted November 10, 2014 Love the detail on the Brake van mate, the kettle looks spot on. I see you've caught Stationmaster-house-itis, although you appear to be doing it properly, and not cheating like some of us 1 Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted November 10, 2014 Author RMweb Premium Share Posted November 10, 2014 Love the detail on the Brake van mate, the kettle looks spot on. I see you've caught Stationmaster-house-itis, although you appear to be doing it properly, and not cheating like some of us Thanks Al mate! There I was all ready to use the Skaledale building until I read your thread so was left with no choice. Only kidding of course. I will copy the weeds around the foundation though that looks great , you can't beat adding life to make things look right. 2 Link to post Share on other sites More sharing options...
Jaz Posted November 10, 2014 Share Posted November 10, 2014 Love the detail on the Brake van mate, the kettle looks spot on. I see you've caught Stationmaster-house-itis, although you appear to be doing it properly, and not cheating like some of us Thanks Al mate! There I was all ready to use the Skaledale building until I read your thread so was left with no choice. Only kidding of course. I will copy the weeds around the foundation though that looks great , you can't beat adding life to make things look right. It is SO good to see all the little ideas coming out, and being modelled....brings back memories......don't forget that pig bin ROFL..... And Al ....updating..improving a ready to plonk is not cheating .......it's showing others how to improve the basics......people do it with locos etc all the time......... Link to post Share on other sites More sharing options...
hornbyandbf3fan Posted November 10, 2014 Share Posted November 10, 2014 The brake can looks amazing and sometimes I do have some half decent ideas Link to post Share on other sites More sharing options...
Jock67B Posted November 11, 2014 Share Posted November 11, 2014 (edited) Morning Shaun, That brake van took me right back to the fifties - when my father had done an express turn as a driver, it didn't take up that many hours. Typical would be Carlisle to Glasgow which left plenty oh time to fit in another working. My favourite footplate rides were when he took a long rake of empty minerals up into the Ayrshire coalfields - the NCB lads took over the filling duties and often he'd sit with the guards van in a siding and we'd join the guard by the pot bellied stove for tea and a bacon buttie! Welsh steam coal could get the stove up to 'glowing' temperature and the clever way of toasting bread was to simply stick the slices on the side of the stove (like the way the telly chefs do chapatis or naans!). I also remember the tea being made on the firemans shovel - the favourite vessel for this being a 'Gales' syrup tin wit a loop of wire as a handle, a few seconds in the firebox and it was infused. Must have been a skilled job on an express loco at speed? My thanks once again for bringing those wonderful memories to mind mate! Still find it hard to believe the method of getting the train back (mostly downhill) to Hurlford mineral sidings. The driver and guard would 'guess' the number of wagon brakes that had to be locked down to control the speed of the unfitted train. Dad often recounted a time when they got it wrong and the weight pushed the train past the junction and nearly all the way to Kilmarnock! Disaster was avoided by the simple expedient of yelling to the signalman as they slid past Hurlford box and he cleared the line. A very embarrassing moment as they had to hi-jack a locomotive that was returning light engine to Hurlford shed to help get the train back to the mineral sidings! Often wonder how often that happened as most of the pits were at a higher elevation than the yards the coal was marshalled at such as those at Ayr (Waterside) and Hurlford (Barleith). Another piece of excellent modelling based on what must have been lots of research - as Jaz suggests, the little details complete the scene! Kind regards, Jock. Edited November 11, 2014 by Jock67B 3 Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted November 11, 2014 Author RMweb Premium Share Posted November 11, 2014 Hi Jock. Just love the old stories, thanks for sharing your memories. I think society has lost something you know. Now-a-days its all day glow vests, premade sandwiches in Tupperware and micro chip techo if a brake fails the whole railway comes to a stand still! So a quick post of last nights efforts. Parts were cut out with a new blade and scored at back where the miters go. Mitering involves folding the joint back on itself to achieve squareness and sanding on my little bench sander with the table set at 45 degrees to the disc. beads of superglue are run down the joints and peco track pins hold it while the glue cures. I dry fitted the windows before pasting Mod Podge around the openings. This does three things. 1 it fixes the windows and allows for plenty of adjustment. 2. it seals the foam edges and 3. with a slight wiggle will close the any gaps as this draws the glue across. then a coat of paint. 5 Link to post Share on other sites More sharing options...
Jaz Posted November 11, 2014 Share Posted November 11, 2014 Hi Jock. Just love the old stories, thanks for sharing your memories. I think society has lost something you know. Now-a-days its all day glow vests, premade sandwiches in Tupperware and micro chip techo if a brake fails the whole railway comes to a stand still! So a quick post of last nights efforts. Parts were cut out with a new blade and scored at back where the miters go. Mitering involves folding the joint back on itself to achieve squareness and sanding on my little bench sander with the table set at 45 degrees to the disc. DSCF4962.JPG beads of superglue are run down the joints and peco track pins hold it while the glue cures. DSCF4963.JPG I dry fitted the windows before pasting Mod Podge around the openings. This does three things. 1 it fixes the windows and allows for plenty of adjustment. 2. it seals the foam edges and 3. with a slight wiggle will close the any gaps as this draws the glue across. DSCF4964.JPGDSCF4965.JPG DSCF4966.JPG then a coat of paint. DSCF4967.JPG DSCF4968.JPG WOW that is coming together FAST........ and plenty of sills and lintels....... Link to post Share on other sites More sharing options...
emt_911 Posted November 11, 2014 Share Posted November 11, 2014 Hi Jock. Just love the old stories, thanks for sharing your memories. I think society has lost something you know. Now-a-days its all day glow vests, premade sandwiches in Tupperware and micro chip techo if a brake fails the whole railway comes to a stand still! So a quick post of last nights efforts. Parts were cut out with a new blade and scored at back where the miters go. Mitering involves folding the joint back on itself to achieve squareness and sanding on my little bench sander with the table set at 45 degrees to the disc. DSCF4962.JPG beads of superglue are run down the joints and peco track pins hold it while the glue cures. DSCF4963.JPG I dry fitted the windows before pasting Mod Podge around the openings. This does three things. 1 it fixes the windows and allows for plenty of adjustment. 2. it seals the foam edges and 3. with a slight wiggle will close the any gaps as this draws the glue across. DSCF4964.JPGDSCF4965.JPG DSCF4966.JPG then a coat of paint. DSCF4967.JPG DSCF4968.JPG Evening Shaun Nice piece of work there. I knew there was a good use for track pins but didn't realise what it was until now. Didn't do much last night then :jester: Link to post Share on other sites More sharing options...
AJ427 Posted November 12, 2014 Share Posted November 12, 2014 Hi Shaun, Looking good there. Here's a couple of images I have of the station master's house - though you'll probably have finished it by the time you see this Andrew 4 Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted November 12, 2014 Author RMweb Premium Share Posted November 12, 2014 Hi Andrew. Those are great thank you. The bare stone end wall was a surprise. I had guessed the chimney was brick or stone and was right about the fact there are no windows in it. This wall on my model has been painted so I will do a test to see if scribing will work through the paint if not will over lay it with stone embossed plastic sheet. I'm not bothering with the back wall as it wont bee seen! Now I wonder how old that shed is? Regards Shaun Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now