90164 Posted January 2, 2022 Share Posted January 2, 2022 14 hours ago, Headstock said: Good evening Frank, the earliest batches had the LNER vac brake and less ribs on the body. Later batches had the cheap as chips Morton pattern and the final batches had the BR version of the eight shoe clasp brakes. A kit was available from Red Pander for the later version and can still be sourced. Replacement chassis and brake gear are available for the LNER and Morton braked batches from Parkside. Hi, Andrew, Thanks for the info. As an O gauge modeller I can only be wistful about the availability of these parts in 4mm scale. Perhaps things will improve as the ABS range becomes available again. Here are two of my lowfits, the BR one is from Slaters, the LNER wagon from Conneisseur. Both excellent kits. Regards Frank 10 Link to comment Share on other sites More sharing options...
RMweb Premium cctransuk Posted January 2, 2022 RMweb Premium Share Posted January 2, 2022 (edited) 19 minutes ago, jwealleans said: Interesting point, John and one which hadn't occurred to me. Open containers don't really seem to feature much in yard photos either and I often wonder how much general use they saw. The only picture of any in traffic which I can bring to mind is in one of the Dr Ian C Allen collections. It's taken somewhere round Norwich and shows an A5 with a number of open containers on Conflats with a light coloured aggregate piled up in them. It's in the background of a shot and not mentioned in the caption. I would love to see that photo - not least because I would not have thought that open containers were substantial enough to withstand the load of aggregate; their written load was 4 tons. The usual load for open containers seems to have been builders merchants' items - sanitary ware, etc. I do recall a photo taken, I think, at or near Great Yarmouth - the concensus of which was that the loaded 'boxes' were PO coal tipplers, used to bunker the steam trawlers. John Isherwood. Edited January 2, 2022 by cctransuk Link to comment Share on other sites More sharing options...
RMweb Premium MJI Posted January 2, 2022 RMweb Premium Share Posted January 2, 2022 Back to vans Looking at pictures in 1960s in Cornwall identified so far about 10. Still to do at least 5. BR ply plank meat insulated BR/GWR ratio van and ply versions BR/LMS vertical plank wood end no brakes. The BR clasp braked, the LMS 4 shoe brake. Still need to ID the ex LNER and SR vans. Hoppers 2 types. Then to opens And many are not available as kits nor RTR. 1 Link to comment Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted January 2, 2022 RMweb Gold Share Posted January 2, 2022 (edited) 1 hour ago, cctransuk said: It is my understanding that open containers were always carried in open wagons, not CONFLAT wagons. This would explain why photos of open containers in trains are few and far between - you couldn't see them in an open wagon! CJI. AIUI, that rule was imposed by BR (anybody know when?) as the LNER open containers aged and after a couple had burst open in transit. There are a couple of photos showing DX containers on LNER Conflats in Peter Tatlow's original single-volume wagon book (page 75). Also, a couple of the smaller H type in a 3-plank dropside wagon. John Edited January 2, 2022 by Dunsignalling 1 1 Link to comment Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted January 2, 2022 RMweb Gold Share Posted January 2, 2022 10 minutes ago, MJI said: Back to vans Looking at pictures in 1960s in Cornwall identified so far about 10. Still to do at least 5. BR ply plank meat insulated BR/GWR ratio van and ply versions BR/LMS vertical plank wood end no brakes. The BR clasp braked, the LMS 4 shoe brake. Still need to ID the ex LNER and SR vans. Hoppers 2 types. Then to opens And many are not available as kits nor RTR. Beyond the very glaring lack of LMS types in r-t-r model and kit form, the plywood-bodied GWR types seem to be the next most prominent omission in 4mm scale. Parkside do one in 7mm. Coverage of "modern" (1930s) LNER and SR vans is pretty good both in r-t-r and as kits. John 1 1 Link to comment Share on other sites More sharing options...
RMweb Premium Baldyoldgit Posted January 2, 2022 RMweb Premium Share Posted January 2, 2022 I built an LMS 1 plank wagon from an ABS kit, the ex GN wagon is my first scratchbuild. Do you have a sideline selling coal? Regards Tony. 9 2 Link to comment Share on other sites More sharing options...
RMweb Premium MJI Posted January 2, 2022 RMweb Premium Share Posted January 2, 2022 1 hour ago, Dunsignalling said: Beyond the very glaring lack of LMS types in r-t-r model and kit form, the plywood-bodied GWR types seem to be the next most prominent omission in 4mm scale. Parkside do one in 7mm. Coverage of "modern" (1930s) LNER and SR vans is pretty good both in r-t-r and as kits. John The ply GWR/BR van is the most common not made. The LNERs I have found 3 are Parkside The lone SR Ratio One I thought was LMS MAY be LNER LMS seems to be sortable with later vans by modifying a mix of Ratio LMS vans and rechassising Airfix/Dapol vans. But for a small number no problem. No Vanwides (VEV VWV). But I need more pre TOPS VVV, both plank and ply. And for my main era I can take it down to 6 air (so one rake VDA one rake VGA) and 4 vac braked types, mixed rakes of ply plank VVV and vanwides. The Cornwall project Wagons will be 75% shared with my 1950s project. 1 Link to comment Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted January 2, 2022 RMweb Gold Share Posted January 2, 2022 29 minutes ago, MJI said: The ply GWR/BR van is the most common not made. The LNERs I have found 3 are Parkside The lone SR Ratio One I thought was LMS MAY be LNER LMS seems to be sortable with later vans by modifying a mix of Ratio LMS vans and rechassising Airfix/Dapol vans. But for a small number no problem. No Vanwides (VEV VWV). But I need more pre TOPS VVV, both plank and ply. And for my main era I can take it down to 6 air (so one rake VDA one rake VGA) and 4 vac braked types, mixed rakes of ply plank VVV and vanwides. The Cornwall project Wagons will be 75% shared with my 1950s project. Yes but both Bachmann and Ratio do all three variants of the SR van, even-planked, 2+2 and plywood. It's also easy to cross-kit the even-planked Ratio one to make the 9' wb versions. Bachmann do/have done a fair selection of LNER vans to a decent standard r-t-r. John 2 2 Link to comment Share on other sites More sharing options...
Headstock Posted January 2, 2022 Share Posted January 2, 2022 2 hours ago, 90164 said: Hi, Andrew, Thanks for the info. As an O gauge modeller I can only be wistful about the availability of these parts in 4mm scale. Perhaps things will improve as the ABS range becomes available again. Here are two of my lowfits, the BR one is from Slaters, the LNER wagon from Conneisseur. Both excellent kits. Regards Frank Good afternoon 90614, a shame about the ABS range but understandable, it is so incredibly useful. A nice set of SR 9' wb, 8 shoe clasp brake gear would do me fine. As for LNER O gauge 8 shoe, there still seems to be bits and bobs about but you have to dig pretty deep. 1 Link to comment Share on other sites More sharing options...
Headstock Posted January 2, 2022 Share Posted January 2, 2022 2 hours ago, Dunsignalling said: Beyond the very glaring lack of LMS types in r-t-r model and kit form, the plywood-bodied GWR types seem to be the next most prominent omission in 4mm scale. Parkside do one in 7mm. Coverage of "modern" (1930s) LNER and SR vans is pretty good both in r-t-r and as kits. John Non of the RTR 4mm scale, GWR 12 T vans are much cop, better to scrap them all and start again. 1 Link to comment Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted January 2, 2022 RMweb Gold Share Posted January 2, 2022 (edited) 3 minutes ago, Headstock said: Non of the RTR 4mm scale, GWR 12 T vans are much cop, better to scrap them all and start again. The Mr Blobby series, all of Mainline ancestry whatever colour box they come in.... I've nicked the underframes off all my Bachmann ones for other projects and replaced them with Ratio kits! Some of the bodies are going onto Dapol chassis for a friend's garden layout where they won't stick out like sore thumbs. John Edited January 2, 2022 by Dunsignalling 2 1 Link to comment Share on other sites More sharing options...
RMweb Premium MJI Posted January 2, 2022 RMweb Premium Share Posted January 2, 2022 my WR branch project will be eventually Locos 100% RTR Bachmann & Dapol 6 sets of 2 to 4 Carriages 10% RTR (Airfix), 15% cross kitted (Mousa MJT Comet Scratch), 15% CKD (Replica), 60% etched kit (Comet) ( B Set, 3 car non corridor last GWR built, 3 car non corridor mk 1, late B set 5 various corridor a 57ft non corridor) Quite a few wagons wil be required Wagons WILL be VERY roughly 20% Airfix 20% Ratio 25% Parkside 5% RTR, 10% scratch and 20% to be 3D printed, oh and some CooperCraft. Aiming for a cattle train, an unfitted short train, a fully fitted, a couple of fitted heads. OK justa pile to run as I feel like it. But since it will be my train set if I want to run blue Diesels occasionally I will! ** ** Note if it had remained open a BRCW 118 would have been guaranteed, as would 117 305 1 Link to comment Share on other sites More sharing options...
RMweb Premium Popular Post 60027Merlin Posted January 2, 2022 RMweb Premium Popular Post Share Posted January 2, 2022 (edited) On 01/01/2022 at 20:58, Tony Wright said: Mind Eric? I'm delighted. Thanks for posting these shots. Do you have any more? Regards, Tony. Tony, Yes, there are more! Here is another selection from 2016/17. To finish a couple of trainspotter type views circa 1958; The first one highlighting what so often happened at the lineside being distracted by something else. When on hearing a loco whistle, a fast run towards the lineside fence was attempted, but still too slow to see the complete loco for identification purposes. The second one captures a trainspotter in the deep south in a state of joyous disbelief on copping PAPYRUS hammering along. Did this really happen with it being so far from home? Eric Edited January 2, 2022 by 60027Merlin 23 1 Link to comment Share on other sites More sharing options...
micklner Posted January 2, 2022 Share Posted January 2, 2022 4 hours ago, 90164 said: Hi, Andrew, Thanks for the info. As an O gauge modeller I can only be wistful about the availability of these parts in 4mm scale. Perhaps things will improve as the ABS range becomes available again. Here are two of my lowfits, the BR one is from Slaters, the LNER wagon from Conneisseur. Both excellent kits. Regards Frank ABS 7mm now here . Hopefully 4mm soon as well https://www.westernthunder.co.uk/threads/abs-models-wrightlines-classic-commercials-news.10030/ 2 Link to comment Share on other sites More sharing options...
Headstock Posted January 2, 2022 Share Posted January 2, 2022 (edited) 21 hours ago, 90164 said: They all seem to have LNER style brakegear but the middle one is a BR steel bodied wagon. Regards Frank Evening Frank, as Mick has pointed out, the ABS 7 mm range is back. They do the 9' w b LNER vac brake for a very good price, it would be a simple to convert it to 10' w b if you so wished. https://www.djparkins.com/product.php?productid=19072&page=1 Edited January 2, 2022 by Headstock Link to comment Share on other sites More sharing options...
Popular Post westernviscount Posted January 2, 2022 Popular Post Share Posted January 2, 2022 11 hours ago, Iain.d said: A few days ago I started building three Peco/Parkside container wagons – the current discussion on wagons was the kick I needed to get going again with them. I had, many months ago, started the preparation – filing off the flash, drilling holes etc – but I got distracted. There was also some good inspiration on RMweb (a thread on Conflats from 2013 – sorry, don’t know how to make a link) much of the imagery by jweallans, and his pages on The LNER Encyclopedia website. On mine, the bulk of the work is done: L-R, a Conflat A with FM container, Conflat A with BD container and a Conflat S with DX container. I will add weight to the containers as opposed to the wagon undersides. The DX container will likely be sheeted as I’m unsure what load could easily / successfully hide the lead weight that I’ll use. There’s nothing particularly special or noteworthy about them. I do like to carve off much of the brake shoe moulded detail and replace it with brass, such as the Bill Bedford brake safety loops and I like to put in the various brake rods and levers. On the Conflat S there will also be safety loops on the brake shoe cross shafts. I have added loops to the containers corners and wagons bases for the securing chains. I have made up vacuum pipes, screw couplings and I’ll fit Gibson sprung buffers once painted. The securing chains are based on Roxey shackles and hooks. These are them being made up. The shock/spring absorber (I’m assuming that’s what it is) is made from 1.5mm OD tube with wire loops from soft brass wire (untwisted picture hanging wire) to secure the hook and shackle, all carefully soldered. They’re a bit overscale but they’ll do. I had no chain and am waiting on the arrival of some cheap super fine stuff from the far east to finish them off. Kind regards, Iain Your shackles look rather nice Iain. I think I will have a go at adding the shock absorber next time on mine. For what it's worth, here are my efforts. The conflats and BD container are parkside kits and the 'a' type insul container is from Bachmann. Shackles are from Roxey I made it fun for myself by fixing the container to the bed before making the shackles. 19 1 8 Link to comment Share on other sites More sharing options...
westernviscount Posted January 2, 2022 Share Posted January 2, 2022 Another couple of kit efforts relating to containers... I am rather happy with the paintimg of the deck on this one. Not sure what happened to the XP decal though. Probably attached itself to what ever I was wearing at the time! 15 4 Link to comment Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted January 2, 2022 RMweb Gold Share Posted January 2, 2022 1 hour ago, micklner said: ABS 7mm now here . Hopefully 4mm soon as well https://www.westernthunder.co.uk/threads/abs-models-wrightlines-classic-commercials-news.10030/ I couldn't find any reference to the 4mm range there; has that gone somewhere else? John Link to comment Share on other sites More sharing options...
stewartingram Posted January 2, 2022 Share Posted January 2, 2022 3 hours ago, 60027Merlin said: It must be said, the expression on Sir's face there is a joy to behold. Obviously very happy. Stewart Link to comment Share on other sites More sharing options...
90164 Posted January 2, 2022 Share Posted January 2, 2022 2 hours ago, Headstock said: Evening Frank, as Mick has pointed out, the ABS 7 mm range is back. They do the 9' w b LNER vac brake for a very good price, it would be a simple to convert it to 10' w b if you so wished. https://www.djparkins.com/product.php?productid=19072&page=1 Thanks, Andrew, I have bought about 5 or so ABS wagons since they were re-released and some parts to help build an Isinglass 3D print of the LNER long CCT. Regards Frank Link to comment Share on other sites More sharing options...
Popular Post Tony Wright Posted January 2, 2022 Author Popular Post Share Posted January 2, 2022 (edited) More progress on the DJH Raven A2.............. Handrails and vacuum ejector pipe. Like most NER (and GWR) locos, the main horizontal handrails carried on over the smokebox door in a continuous curve. As anyone who has to make the feature knows, it is an absolute fag! Normally, I do the whole thing in one go, but the nature of the smokebox door (which includes the front ring, to which a central top pillar is attached) means that technique is impossible (at least as far as I'm concerned). So, I split the process into three operations - the two main horizontal handrails, then that curved front. A dictionary of profanity is as useful as the soldering iron! I represented the little gadget on this side of smokebox adjacent to the handrail with an old-fashioned 'football' handrail pillar. Not too much now, before she's off to Geoff Haynes for painting. Then................. Edited January 2, 2022 by Tony Wright to add something 25 Link to comment Share on other sites More sharing options...
Woodcock29 Posted January 2, 2022 Share Posted January 2, 2022 11 hours ago, Tony Wright said: Thanks Andrew, I hope the model of 10000 can be found at HQ. I'd like to take a close look at it, then write my review. Since I played no part in this model's development (and, thus, have no need to express an interest), I think I can write an impartial review (Howard Smith has asked me to). With regard to the Hornby A2/2s and A2/3s, since I assisted the designers with the models' developments, I thought it out of the question that I write the review. It was similar with the Bachmann V2; though I had little in the way of input compared with the Thompson Pacifics, I still told the designers, when the proving models were tested on LB, that it wouldn't be right for me to consider writing the review. As for the Oxford J27 (for which I wrote the BRM review), apart from loaning drawings and books, my input to that was nothing, other than the offering of some advice to the product manager. This sort of thing always raises some tricky questions. It's a privilege to be asked to contribute (in a small way) to RTR products' developments, but it does raise the issue of how impartial I might be if asked to write a review. As mentioned, in most cases, if I've assisted, then I won't write a review (the Heljan LNER Tangos spring to mind). In some cases, it's no more than providing prototype photographs and writing publicity pieces for a model - Accurascale's forthcoming Deltics, for instance. Of course, with the rise of the internet, anyone now can write and present a review. If they've paid for the model, then that is their privilege. Generally, RTR manufacturers send review samples to magazines FOC. They're then (in my case) used as guinea pigs for further improvement/alteration/weathering/etc and then sold-on for charity (or I keep them to run on LB - EARL MARISCHAL - for instance), or they're offered as prizes. I always send a copy of my review to the manufacturer beforehand (well, almost always - occasionally, a deadline is too tight), giving him/her the opportunity to respond via a right to reply. I consider that just common courtesy. Occasionally, my comments are acted upon - my mentioning to Simon Kohler about the out-of-gauge W1 steps will result in future runs having them as separate items, to be added by the purchaser, or not. Speaking of those steps, by moving them inboard a little, presumably they still cleared the motion? I also write book reviews. Here, the 'definitions' are a little blurred, and I must admit that I'll have often been asked by the publishers to proof-read works, provide photographs and/or write captions. Whether that sort of thing should preclude my writing of a review is a moot point. It's a similar thing when I'm a friend of the author(s). Regards, Tony. Yes the steps still clear the motion okay. Chamfering the edges is for two reasons - make them look thinner and also ensure should the valve gear catch it will slide behind but it doesn't catch on mine. I don't think I could move them in much more. I'll be writing a review for our BRMA Journal The Clearing House over the next couple of weeks. That seems to be a task I've set myself for all new LNER 4mm scale models over the last 10 plus years. Andrew 4 1 Link to comment Share on other sites More sharing options...
FarrMan Posted January 3, 2022 Share Posted January 3, 2022 Re the discussion a day or so ago on containers in open wagons, I have consulted 'Freight Wagons and Loads in service on GWR and BR,WR, by J.H. Russell. Fig 119 shows a LNER 6 plank open (I cannot see a number) loaded with two small flat GWR SL containers, one on top of the other. These containers were used for 'ceramics, tiles, & similar earthenware materials'. The date is given as 1928, and the location as Paddington Goods. The next image, Fig 120, is of GWR 6 plank open 148250 with side door open, showing it loaded with an open bulk container, CB2948, for the conveyance of sand, gravel, etc. No date given, but location as Royal Oak. Lloyd Link to comment Share on other sites More sharing options...
RMweb Gold TheSignalEngineer Posted January 3, 2022 RMweb Gold Share Posted January 3, 2022 On 02/01/2022 at 13:52, MJI said: One I thought was LMS MAY be LNER LMS seems to be sortable with later vans by modifying a mix of Ratio LMS vans and rechassising Airfix/Dapol vans. But for a small number no problem. In the same way that there are Ashford vans in GWR and LMS number series there were 250 vans, numbered 521290 - 521539 built by the LNER under lot number 1335 for the LMS in 1942. They were the standard LNER van but with horizontal planked ends in place of the corrugated ends due to wartime shortages. Originally built unfitted they were allocated LMS diagram 2079 and survivors were vacuum fitted by BR. There are pictures in Essery's 'An Illustrated History of LMS Wagons Volume 1', Figure 38 and Plates 104 / 105. Apart from the brake rigging they seem to be identical right down to the LNER axle boxes. At first glance there are also a lot of similarities between post-war LMS and LNER vans but the body strapping details as well as the brakes and axle boxes give away their origins. 2 2 Link to comment Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted January 3, 2022 RMweb Gold Share Posted January 3, 2022 6 minutes ago, TheSignalEngineer said: In the same way that there are Ashford vans in GWR and LMS number series there were 250 vans, numbered 521290 - 521539 built by the LNER under lot number 1335 for the LMS in 1942. They were the standard LNER van but with horizontal planked ends in place of the corrugated ends due to wartime shortages. Originally built unfitted they were allocated LMS diagram 2079 and survivors were vacuum fitted by BR. There are pictures in Essery's 'An Illustrated History of LMS Wagons Volume 1', Figure 38 and Plates 104 / 105. Apart from the brake rigging they seem to be identical right down to the LNER axle boxes. At first glance there are also a lot of similarities between post-war LMS and LNER vans but the body strapping details as well as the brakes and axle boxes give away their origins. I think the LNER produced a small batch of a fitted version for their own use at the same time. The wooden ends were a reversion to an older diagram and the old (discontinued) Parkside kit PC05 and Bachmann has done the LNER version RTR. John 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now