micklner

Push a piece of 0.45mm wire through the Tube . Takes seconds and its not Rocket science.🙃

No idea if Nickel silver is heavier or lighter?. This is a Autocar, I presume it would need low down weight e.g lead at least over the drivers, otherwise the wheels will just spin!!. Plus overall stability would be improved . It might only need weight at each end. Testing will show either way in due course. I agree the D&S Coaches are far from light, but they dont have to do any work for a living !!.

A nice lump of the lead under the Seats will help the Bogie stay on the Rails in due course. No idea of the actual total weight at a guess quite light . It might need more Lead in due course elsewhere as well !!.

Use multicore solder resin flux therin

No problem all working. Firefox and Apple Mac

Same result for me.

Not a problem to me, kits should always be of a marketable standard. Unless any faults are made public , how would anyone ever know before buying, what they are actually spending their hard earned on. It is also a good learning experience for new modellers, on how to make better models. The same applies to praise where deserved. What I do not appreciatte however, is the recent totally unecessary and sarcastic remarks by one individual made towards a excellent modeller, who has helped me on a number of occasions. Nothing whatsoever to do with him, and he is not welcome on here ever again.

https://www.247developments.co.uk/ above is what works on my computer

G5 and Auto Coach here.

https://www.247developments.co.uk/loco_detailing.html Brassmasters do detail kits https://www.brassmasters.co.uk/lner_castings.htm

Looking at the instructions , it appears to be a very simple kit. One good thing is that does'nt have a fold up chassis. http://www.pdkmodels.co.uk/PDK 62. Raven B16-1.pdf

JW Does it go around corners ?? If so radius ? cheers Mick

https://www.lner.info/locos/L/l1thompson.php

Richard, Life would be much easier with a HL Box and Motor . Perhaps a alternative method, losing the flywheel would make the DJH one easier to shoehorn in ? Good luck !! Mick

I have only built one PDK kit a LNER A1/1 Great Northern, and not a pleasant experience. The one piece Resin Boiler was impossible to add any weight too, as it was cast virtually solid, only a slot for the motor to sit in . Resin is nasty and messy stuff, no way was I grounding a larger hole out. As with my current build the LRM B16, the frames were also too wide. Even after filing the axle bushes flat against the frames, sideplay was barely minimal . Even worse, was that the PDK chassis was a one piece fold up design, and impossible to make narrower, I presume it was aimed at EM gauge !! The A1/1 did run ok , it did'nt like any bends and I never bothered trying the haulage capacity as it was far too light. The kit had also poorly made/designed valve gear as on their B16/2. It was sold on very quickly via ebay. Luckily Graeme King's lovely conversion kits of etched and resin parts for Hornby and Bachmann Pacifics arrived at about the same time. Miles better results, as is shown in the below photo of the conversion of a Hornby A3 to A1/1.

Looking at the B16/3 here http://www.pdkmodels.co.uk/PDK 61. B16-2-3.html The Smokebox is as said a major error, I have no intention of building any more B16's of any variation, the one I have nearly finished is more than enough for me. Looking at the PDK instructions perhaps a new Smokebox could be made from thinner brass using the kits one as a pattern. The kits Valve Gear looks awful, and not helped by it not working correctly either. I can see why Mike Edge did another etch at the time !!.

Good find well done. I see i suggested the thread as well !! I have just ploughed through 50 pages of the normal Mike Edge thread, not many photos of anything theron !! A great shame. cheers

Nice Department Coach marked Joiners Van to the left of the J28. Presumably in Oxford Blue livery.

It probably has no photos either.

Any idea where the Mike Edge B16/2 build is . I remember him doing a better etch for the valve gear , no idea for which kit. Nothing coming up on searches other than ones saying 1000 plus hits . Mikes thread has over 80 pages as well.

As already said why should any recently released kit have to have new castings , scratch building etc . These were expected kit standards 30 years or more ago . In this case the kit I consider is sold at a premium price of £175.00 plus the usual expected adds ons such as wheels etc. I did'nt expect to scratchbuild, alter/replace parts and all the other issues at that price. PDK sell a B16 kit for £120.00 I have never seen or built one , can it be any worse than the LRM version for £55.00 less I doubt it ??. I actually bought the Oil Box castings on my build from Paul Hill @ PDK as LRM supplied none. http://www.pdkmodels.co.uk/PDK 62. B16-1.html The kit market in general needs to up its game before it dies as R.T.R are swamping the market or already have done so. Enough said re this kit and the excuses already written relating to this issue on earlier posts. Its all a very disapointing scenario to me at least. Back to the B16 "kit", re the incorrect Toolboxes , they have now been replaced with correct Brass ones sent to me via a very kind offer from Richard 30368 on here. I have done a bit of work on them, and they are now attached to the Tender ready for painting as below photos. Re the other fault on the Tender, the Coal Tender sides being overlength by 3mm . They were already soldered to the main Body when the fault was pointed out to me, in a earlier post. They are staying as they are , I doubt they would have survived removal, the paint being removed ,being cut down to the correct size and then finally soldered again back onto the body. As already said by Mike above. Dave Bradwell castings , he not only some sells excellent castings , he also sells his version of the Q6 NER Tender and other NER/LNER size Tenders for £60 complete other than wheels. This will I have no doubt will be the correct sizes of parts, shapes etc and will build without any issues. LRM want £50 for their incorrect version as a seperate kit, without wheels . The "towbar" on the front of the Tender is straight , no idea why the Camera has decided it has been on the Beer !!

From Facebook today.

Had a look today at the Sentinel Tumblehome, no more than 1mm or even less and hardly noticeable under paint and varnish.

Have a look on Ali Express very good prices for lotsa bits including Motors etc. GW Rollers flexing? , never noticed any issues. Obviously the thicker/harder the metal is the more chance of it happening .