RMweb Gold farren Posted September 19, 2023 RMweb Gold Share Posted September 19, 2023 42 minutes ago, adb968008 said: Its exactly that… within hours the thread will change to… its arrived, then.. unboxing videos.. test runs… if all that gets banned then buying model railways becomes no more exciting than buying wall paper. Weve waited years, live a little. next week when they are no longer new, we can go back to being miserable… the warm weathers gone now too. What do mean no longer new, I’m camping out on the door step right now for both 37258, and 66507dc, ok I have a few payments to make but still something to look forward to. So this could carry on for at least six more months. 2 Link to post Share on other sites More sharing options...
RMweb Gold BigDee Posted September 19, 2023 RMweb Gold Share Posted September 19, 2023 3 hours ago, 55020 said: I do have two workarounds, one being much "easier" than the other. The more complex solution really needs the Lokprogrammer, as otherwise it requires a lot of CV changes. Let me know if you have a Lokprogrammer. Sadly the behaviour is baked into the sound project. Steve Hi Steve, Thank you for the reply, I have Lokprogrammer. Find it strange that other AS37s I have don’t do this but the latest does🤔 Cheers D Link to post Share on other sites More sharing options...
RMweb Gold BigDee Posted September 19, 2023 RMweb Gold Share Posted September 19, 2023 Another beauty arrived today 😍 14 1 Link to post Share on other sites More sharing options...
woodenhead Posted September 19, 2023 Share Posted September 19, 2023 9 minutes ago, BigDee said: Another beauty arrived today 😍 I guess beauty is in the eye of the beholder, this is right up there with 37116 and it's strange part yellow ends. 🤣 3 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted September 19, 2023 RMweb Gold Share Posted September 19, 2023 13 minutes ago, BigDee said: Another beauty arrived today 😍 it sounds like this…. even better as the viewpoint is a modellers angle too.. 4 2 Link to post Share on other sites More sharing options...
woodenhead Posted September 19, 2023 Share Posted September 19, 2023 5 minutes ago, adb968008 said: even better as the viewpoint is a modellers angle too.. Even looks like a cutting a modeller would create too. 1 Link to post Share on other sites More sharing options...
RMweb Premium ERIC ALLTORQUE Posted September 19, 2023 RMweb Premium Share Posted September 19, 2023 Then there was six, if this keeps up Ikea will need a visit as its a neat solution to store the locos, once the weather closes in hope to get time to finnish baseboards for half the loft and get some track to run on. 13 Link to post Share on other sites More sharing options...
rob D2 Posted September 19, 2023 Share Posted September 19, 2023 1 hour ago, ERIC ALLTORQUE said: Then there was six, if this keeps up Ikea will need a visit as its a neat solution to store the locos, once the weather closes in hope to get time to finnish baseboards for half the loft and get some track to run on. McC thumbs up that image … ” That’s another week in Barbados for me !” ;) 7 Link to post Share on other sites More sharing options...
Popular Post Markn Posted September 19, 2023 Popular Post Share Posted September 19, 2023 The bar just keeps getting raised with these beauties 🥰 22 1 1 Link to post Share on other sites More sharing options...
RMweb Gold BigDee Posted September 19, 2023 RMweb Gold Share Posted September 19, 2023 2 hours ago, ERIC ALLTORQUE said: Then there was six, if this keeps up Ikea will need a visit as its a neat solution to store the locos, once the weather closes in hope to get time to finnish baseboards for half the loft and get some track to run on. You’ll need a larger house to fit the more boxes in! 1 3 Link to post Share on other sites More sharing options...
dave56 Posted September 19, 2023 Share Posted September 19, 2023 Rog 37608 "Andromeda" has arrived. 13 1 Link to post Share on other sites More sharing options...
RMweb Premium ERIC ALLTORQUE Posted September 19, 2023 RMweb Premium Share Posted September 19, 2023 2 hours ago, Markn said: The bar just keeps getting raised Glad i dont drink,i would spill my pint trying to reach............. 2 hours ago, BigDee said: You’ll need a larger house I wanted this bungalow as the loft was crying out for a model railway............ 3 hours ago, rob D2 said: That’s another week in Barbados for me !” Well once ROG and mellow yellow get here and the 66 fleet and the next batch of 37,s he can have a house there i guess.......... 3 1 Link to post Share on other sites More sharing options...
Krieghoff Posted September 19, 2023 Share Posted September 19, 2023 Deep Joy. 37610 arrived today. Just waiting for 609, yellow peril and ROGer. 🤣 3 Link to post Share on other sites More sharing options...
WCML100 Posted September 20, 2023 Share Posted September 20, 2023 16 hours ago, Markn said: The bar just keeps getting raised with these beauties 🥰 Livery application on this one is hard enough to get right, say on a slab sided 47 or 57... let alone the complexities of a 37. Top marks on this one lads! 4 2 Link to post Share on other sites More sharing options...
WCML100 Posted September 20, 2023 Share Posted September 20, 2023 18 hours ago, BigDee said: Hi Steve, Thank you for the reply, I have Lokprogrammer. Find it strange that other AS37s I have don’t do this but the latest does🤔 Cheers D I also have the same issue - wonder if there is a particular reason it is built in... 1 Link to post Share on other sites More sharing options...
Markn Posted September 20, 2023 Share Posted September 20, 2023 Tell you what, I'm properly impressed with the application of livery on both 608 and 609. It really shows what can be done. Blooming beautiful models. 18 Link to post Share on other sites More sharing options...
atom3624 Posted September 20, 2023 Share Posted September 20, 2023 I'm a 'traditional' B.R. blue / large logo preference person, but must admit the DRS and ROG variants look pretty good! Al. 2 3 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted September 20, 2023 RMweb Gold Share Posted September 20, 2023 Not to scare anyone but Rails just called looking for volunteers to cancel a ROG 37608. i dont see many about online either. 1 Link to post Share on other sites More sharing options...
RMweb Premium newbryford Posted September 20, 2023 RMweb Premium Share Posted September 20, 2023 (edited) 2 minutes ago, adb968008 said: Not to scare anyone but Rails just called looking for volunteers to cancel a ROG 37608. i dont see many about online either. There is an AS dealer with them on ebay. Four of each sound and non-sound at last count. Edited September 20, 2023 by newbryford Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted September 20, 2023 RMweb Gold Share Posted September 20, 2023 (edited) 11 minutes ago, newbryford said: There are AS dealers with them on ebay. Yup… £169 though ? i’m ok with my order, but i’m spotting a pattern, I missed out on 7802 the other week and that was all bought and paid for…until it was refunded. Its the first call ive had from Sheffield in years, so its unusual. My 37610 arrived fine though. Edited September 20, 2023 by adb968008 2 Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted September 20, 2023 RMweb Gold Share Posted September 20, 2023 23 hours ago, ERIC ALLTORQUE said: Then there was six, if this keeps up Ikea will need a visit as its a neat solution to store the locos, once the weather closes in hope to get time to finnish baseboards for half the loft and get some track to run on. There are far better places than Ikea for industrial strength shelving 1 Link to post Share on other sites More sharing options...
Br60066 Posted September 20, 2023 Share Posted September 20, 2023 Hi Guys, Anyone had any joy getting 2 of these to consist together and run at the same speed? One of my models is sound and the other has the standard Accurascale DCC chip in it but I can't get them to match speeds. When hauling something like FNA's it causes the wagons to derail since they are always either being pulled apart or pushed together. Is this likely a problem with the models manufacturing tolerances meaning they will always run at slightly different speeds or will I need to run both models on the same decoder to resolve the issue? Link to post Share on other sites More sharing options...
Markn Posted September 20, 2023 Share Posted September 20, 2023 608, 609 and 97301 available on accurascale website right now. Tempted by the 97, but two loco's in one week is enough now. 1 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted September 20, 2023 RMweb Gold Share Posted September 20, 2023 53 minutes ago, The Stationmaster said: There are far better places than Ikea for industrial strength shelving Ah! But Mike, not everywhere with industrial strength shelving has meat balls, gravy and chips......... Rob 1 1 4 Link to post Share on other sites More sharing options...
The Meerkat Posted September 20, 2023 Share Posted September 20, 2023 35 minutes ago, Markn said: 608, 609 and 97301 available on accurascale website right now. Tempted by the 97, but two loco's in one week is enough now. think the rog and 97 are sold out, though 97 say low stock when you click on it, it says sold out Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now