RMweb Gold zr2498 Posted September 22, 2023 RMweb Gold Share Posted September 22, 2023 11 minutes ago, BR Blue said: There is a search facility on the site and you can search a single topic as far as I know. Found it = May 19th (search via 'tail') Thanks @LMSfan72 🙂 Here is a copy of the remapping - saves a lot of effort! 1 1 Link to post Share on other sites More sharing options...
brittannia Posted September 22, 2023 Share Posted September 22, 2023 Received my latest 2 Class 37608 Andromeda and BR Blue 37610 RAILS LTD edition both run excellently at all speeds. not tried with a load yet, Thanks Accurascale Link to post Share on other sites More sharing options...
Chris56057 Posted September 22, 2023 Share Posted September 22, 2023 Is it possible to test a Loksound V4 sound decoder in one of these models before purchasing a Accurathrash speaker to plug in? Link to post Share on other sites More sharing options...
RMweb Gold Accurascale Fran Posted September 22, 2023 Author RMweb Gold Share Posted September 22, 2023 3 minutes ago, Chris56057 said: Is it possible to test a Loksound V4 sound decoder in one of these models before purchasing a Accurathrash speaker to plug in? Hi Chris, Yes, there is a sugar cube speaker in the loco already, so it will work fine. I'm not sure what lighting functions etc you may or may not have though. Cheers! Fran 1 Link to post Share on other sites More sharing options...
LMSfan72 Posted September 22, 2023 Share Posted September 22, 2023 5 hours ago, zr2498 said: Found it = May 19th (search via 'tail') Thanks @LMSfan72 🙂 Here is a copy of the remapping - saves a lot of effort! Just a note: if you use it on a 37/4 with the single high intensity you need to replace AUX7 and AUX8 with AUX5 and AUX6 otherwise the headlight turns off when the instrument lights go on 1 Link to post Share on other sites More sharing options...
Porcy Mane Posted September 22, 2023 Share Posted September 22, 2023 On 20/09/2023 at 21:37, McC said: If you’ve an Alpha Meter in the track circuit it’s something we’ve seen issues with programming and stay alive and performance too. A local retailer offered me an Alpha meter at a very knock down price* a couple of years ago. My plan was to use it on my programming track. Long story short, when installed it made DCC programming very unreliable. This was mainly using Zimo decoders but it looks like Accurascale have confirmed the same effects with ESU. A meter when used on DC only gives readings in one direction only. Who needs that hassle? I soon went back to using my calibrated Flukes. Those green 37's are looking tasty. *It had sat on his shelves for too long so he gave it away. 1 Link to post Share on other sites More sharing options...
DLIBOD17 Posted September 22, 2023 Share Posted September 22, 2023 (edited) … Edited September 22, 2023 by DLIBOD17 16 Link to post Share on other sites More sharing options...
RMweb Gold zr2498 Posted September 22, 2023 RMweb Gold Share Posted September 22, 2023 10 minutes ago, Porcy Mane said: A local retailer offered me an Alpha meter at a very knock down price* a couple of years ago. My plan was to use it on my programming track. Long story short, when installed it made DCC programming very unreliable. This was mainly using Zimo decoders but it looks like Accurascale have confirmed the same effects with ESU. A meter when used on DC only gives readings in one direction only. Who needs that hassle? I soon went back to using my calibrated Flukes. Those green 37's are looking tasty. *It had sat on his shelves for too long so he gave it away. Are you suggesting it's best to normally keep it bypassed, and only use it to measure values if a problem already exists (such as fluctuating current draw with faulty motor)? It would be interesting to know a bit more detail about the problems the meter can cause. 1 1 Link to post Share on other sites More sharing options...
Markn Posted September 22, 2023 Share Posted September 22, 2023 (edited) 2 hours ago, DLIBOD17 said: … Very nice. Currently fitting mine. Have gone for the full plough on 609 but wanted the dellner on 608. Did initially fit it as the loco is now, but the pipes looked really precarious dangling there without any protection, so I've gone with the side ploughs and the dellner, like it was around 2018-2021 (from memory). Always think they look tons better with the plough anyway, and quite naked without it. EDIT due to brainfart and wrong years Edited September 22, 2023 by Markn 1 1 Link to post Share on other sites More sharing options...
RMweb Gold Red Fox Posted September 22, 2023 RMweb Gold Share Posted September 22, 2023 Apologies if it's somewhere in the previous 269 pages. Is there a function list somewhere for the Accurascale Lokpilot sold specifically for the 37? The function list included with the loco is for the sound version and no info with the decoder or on the Accurascale site. My ancient Lenz Set 100 has only managed F0 directional lights so far and that's with the microswitches set as per the instruction card Link to post Share on other sites More sharing options...
RMweb Gold McC Posted September 22, 2023 RMweb Gold Share Posted September 22, 2023 1 minute ago, Red Fox said: Apologies if it's somewhere in the previous 269 pages. Is there a function list somewhere for the Accurascale Lokpilot sold specifically for the 37? The function list included with the loco is for the sound version and no info with the decoder or on the Accurascale site. My ancient Lenz Set 100 has only managed F0 directional lights so far and that's with the microswitches set as per the instruction card The function chart included with the model is for both lokpilot and loksound (all the functions are standard) 1 Link to post Share on other sites More sharing options...
Porcy Mane Posted September 22, 2023 Share Posted September 22, 2023 1 hour ago, zr2498 said: Are you suggesting it's best to normally keep it bypassed, and only use it to measure values if a problem already exists (such as fluctuating current draw with faulty motor)? It would be interesting to know a bit more detail about the problems the meter can cause. I'm not suggesting anything. Just reporting that Accurascale and I had similar problems with the Alpha meter installed. My problems occurred when programming using decoder pro interfaced via both sprog and DCC-EX. It also happened when programming direct using a powercab. I cannot comment on any other systems Problems were intermittent but regular which included loco identities not being recognised or reported incorrectly and CV's changes not being correctly written to decoder. All reverted to normal with the Alpha Meter removed from the track bus. Although purely personal being used to 3 or 4 decimal place current displays, I couldn't get on with the alpha meter having only a two decimal place display. 1 Link to post Share on other sites More sharing options...
GBRf 66 The Flying Dustman Posted September 22, 2023 Share Posted September 22, 2023 (edited) 2 hours ago, DLIBOD17 said: … Very nice you need to remove the centre section of the plough on 37 610 as it doesn’t have it in real life Edited September 22, 2023 by GBRf 66 The Flying Dustman 1 Link to post Share on other sites More sharing options...
DLIBOD17 Posted September 22, 2023 Share Posted September 22, 2023 16 minutes ago, GBRf 66 The Flying Dustman said: Very nice you need to remove the centre section of the plough on 37 610 as it doesn’t have it in real life . I had noticed that from images. Must help the poor shunters in real life but decided to fit mine in the 00 world 👍🏻 Link to post Share on other sites More sharing options...
Fins Models Posted September 22, 2023 Share Posted September 22, 2023 Absolutely blown away by the 37, detail is superb and the accurathrash speaker makes it sound like there is an actual engine inside of it. 1 1 Link to post Share on other sites More sharing options...
dave56 Posted September 22, 2023 Share Posted September 22, 2023 18 minutes ago, GBRf 66 The Flying Dustman said: Very nice you need to remove the centre section of the plough on 37 610 as it doesn’t have it in real life It would seem from what I can see on Fickr 37608 has never had the the centre plough fitted in ROG colours. Link to post Share on other sites More sharing options...
Markn Posted September 22, 2023 Share Posted September 22, 2023 Looking through flickr, 610 did actually have the middle section fitted around Feb/March 2019. Think this was just after repaint into current livery. Link to post Share on other sites More sharing options...
Markn Posted September 22, 2023 Share Posted September 22, 2023 (edited) 7 minutes ago, dave56 said: It would seem from what I can see on Fickr 37608 has never had the the centre plough fitted in ROG colours. There are a few pics from it's early ROG days back in 2017 like this (not mine). But then the front end isn't as currently modelled with the two connectors. Edited September 22, 2023 by Markn 2 Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted September 22, 2023 RMweb Gold Share Posted September 22, 2023 Here’s a question for the guys. Will D6992 include domino headcodes in the pack? I’m after a central headcode 37 with the skirts and it’d be an easy renumber and relogo job. Link to post Share on other sites More sharing options...
mevaman1 Posted September 22, 2023 Share Posted September 22, 2023 I have seen the latest production samples at the Kernow shop event. They are truly marvellous. I need to win the lottery! 3 Link to post Share on other sites More sharing options...
RMweb Premium E100 Posted September 22, 2023 RMweb Premium Share Posted September 22, 2023 11 hours ago, zr2498 said: Found it = May 19th (search via 'tail') Thanks @LMSfan72 🙂 Here is a copy of the remapping - saves a lot of effort! I’d suggest this might be something that Accurascale look into doing across future loco runs (not just 37) in terms of switching the tail lights on when in light engine mode. Granted you may end up with people saying my tail lights aren’t working. 1 Link to post Share on other sites More sharing options...
Mophead45143 Posted September 23, 2023 Share Posted September 23, 2023 12 hours ago, 97406 said: Here’s a question for the guys. Will D6992 include domino headcodes in the pack? I’m after a central headcode 37 with the skirts and it’d be an easy renumber and relogo job. Not quite that easy, by the domino era (late 70's onwards), locos had the reinforced plate above the coupling on the bottom of the nose. Cameron Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted September 23, 2023 RMweb Gold Share Posted September 23, 2023 (edited) 39 minutes ago, Mophead45143 said: Not quite that easy, by the domino era (late 70's onwards), locos had the reinforced plate above the coupling on the bottom of the nose. Cameron There must be an easy solution for that… they were present much earlier . Wonder if @railtec-models Steve could do a rivet transfer? Phil Edited September 23, 2023 by Phil Bullock Link to post Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted September 23, 2023 RMweb Gold Share Posted September 23, 2023 13 hours ago, 97406 said: Here’s a question for the guys. Will D6992 include domino headcodes in the pack? I’m after a central headcode 37 with the skirts and it’d be an easy renumber and relogo job. There are plenty of aftermarket solutions eg Precision Labels if not…. 1 Link to post Share on other sites More sharing options...
RMweb Gold 97406 Posted September 23, 2023 RMweb Gold Share Posted September 23, 2023 2 hours ago, Phil Bullock said: There must be an easy solution for that… they were present much earlier . Wonder if @railtec-models Steve could do a rivet transfer? Phil A small piece of 10 thou plasticard and Railtec rivet transfers is the solution I have in my mind’s eye. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now