PMW Posted October 16, 2020 Share Posted October 16, 2020 Is there a place which brings together modelling tricks? I'm thinking especially for scratch builders. The sort of thing I mean is spraying plasterboard scrim tape with silver spray paint makes an excellent representation of chicken wire. Scrim tape is £3 from Screwfix and silver paint can often be found in Poundland, if not Wilko sell it for £2 The wooden stirrers found in Costa et al make excellent Scaffold boards one the ends are squared. 1 2 Link to post Share on other sites More sharing options...
RMweb Gold The Johnster Posted October 16, 2020 RMweb Gold Share Posted October 16, 2020 If only there was. Perhaps we could call it something like, oh, I don't know, Modelling Questions, Help, and Tips and have it as a section on the RMWeb site. Coffee stirrers appear on my layout as footboards (cut in half lengthways) and plank wagon loads; there is no scaffolding so no need for scaff boards. They also feature as the nameboard for the Ogmore Forest Non-Political Sports and Social Club, though I haven't put the lettering on yet! if they are good for scaff boards they will be good for roof crawling boards as well. Good tip with the scrim tape! Another tip is pound shop tools. They are usually useless for their intended purpose, but are great for opening paint tins, levering, and the like. I have a set of brightly coloured pound shop children's paint brushes, though I don't have (or want) the brightly coloured pound shop. children to go with them, which are hopeless for painting with, as they have very stiff thick nylon 'hairs'. They are absolutely perfect fro sweeping out debris from check rail flangeways though! While we're at it, when you are dismantling RTR locos, keep a lump of Blutac or similar handy to put tiny screws and other small pieces in; it will help to stop them making a break for the border or sacrificing themselves to the carpet monster (my layout lives in the bedroom, so I can't get away with not having a carpet monster) while you're not looking... 5 1 Link to post Share on other sites More sharing options...
woodyfox Posted October 17, 2020 Share Posted October 17, 2020 As a kit/scratchbuilder, my main boon at the moment is IPA. You need the 99% purity minimum stuff but it has numerous applications from cleaning to mixing up in homemade flux and acrylic thinners etc.. You can by a couple of litres online quite cheaply and it lasts an age. My other favourite aid is patience. 1 2 Link to post Share on other sites More sharing options...
Ray Von Posted October 17, 2020 Share Posted October 17, 2020 My 3 Top Tips - Dettol as a paint stripper, really glad I discovered that one - if you buy a model that someone else has built and perhaps not made the best effort of painting, it's very satisfying to strip it back to bare plastic with this method. (Also undoing your own Faux Pas!) I recently discovered that Blu-tak (other brands are available) can be very useful when fitting Third Rail (in N gauge at any rate.) I position the rail and use largish blobs of Blu-tak at intervals to stop it moving - as it has a tendency to - and then apply superglue at points along the rail (just be careful not to glue the Blu-tak as it makes a nasty gummy mess!) The Blu-tak can stay in situ until the glue is nice and dry. I've also been known to use Blu-tak to hold building-kit walls in place while glueing, either inside the building where the walls meet at a right-angle or on the workbench with the building corners squished into it. Better than sitting there, trapped with a wall in each hand trying not to move while the glue sets! Aerosol Primer- grey for darker topcoats white for lighter ones - the latter is especially true of Reds and Yellows, you can get through a lot of model paint trying to cover grey primer with a light colour. For more details just type a keyword into the search box. But I do like the idea of a "Top Tips" section. 1 1 Link to post Share on other sites More sharing options...
wirey33 Posted October 17, 2020 Share Posted October 17, 2020 8 hours ago, woodyfox said: As a kit/scratchbuilder, my main boon at the moment is IPA. You need the 99% purity minimum stuff but it has numerous applications from cleaning to mixing up in homemade flux and acrylic thinners etc.. You can by a couple of litres online quite cheaply and it lasts an age. My other favourite aid is patience. I wish you could buy that cheaply in litre bottles... 3 1 Link to post Share on other sites More sharing options...
RMweb Gold john new Posted October 17, 2020 RMweb Gold Share Posted October 17, 2020 23 hours ago, The Johnster said: If only there was. Perhaps we could call it something like, oh, I don't know, Modelling Questions, Help, and Tips and have it as a section on the RMWeb site. ....... snipped....... While we're at it, when you are dismantling RTR locos, keep a lump of Blutac or similar handy to put tiny screws and other small pieces in; it will help to stop them making a break for the border or sacrificing themselves to the carpet monster (my layout lives in the bedroom, so I can't get away with not having a carpet monster) while you're not looking... One useful tool I bought recently from Halfords is a metal dish with super strong magnet built in as a metal screw catcher. Like the blue tack a way of stopping errant screws disappearing. 1 2 Link to post Share on other sites More sharing options...
doilum Posted October 17, 2020 Share Posted October 17, 2020 Ferrero Rocher. The usual size make great drawers for sorting out your store of components and spares. The large flat presentation boxes are ideal for dismantling a loco in order to avoid losing tiny springs, screws and washers. This also helps if you need to clear the work bench quickly for another task, like feeding the child. Expensive? Look in the £shop just after Christmas! 3 1 Link to post Share on other sites More sharing options...
wirey33 Posted October 17, 2020 Share Posted October 17, 2020 10 minutes ago, doilum said: Ferrero Rocher. The usual size make great drawers for sorting out your store of components and spares. The large flat presentation boxes are ideal for dismantling a loco in order to avoid losing tiny springs, screws and washers. This also helps if you need to clear the work bench quickly for another task, like feeding the child. Expensive? Look in the £shop just after Christmas! Those boxes are also exactly the right size for Humbrol tinned paint. 6 2 2 3 1 Link to post Share on other sites More sharing options...
Steamport Southport Posted October 17, 2020 Share Posted October 17, 2020 People buy them? I get them when I attend the embassy. 12 Link to post Share on other sites More sharing options...
Ray Von Posted October 17, 2020 Share Posted October 17, 2020 1 minute ago, Steamport Southport said: People buy them? I get them when I attend the embassy. They're really spoiling you... 1 1 Link to post Share on other sites More sharing options...
doilum Posted October 17, 2020 Share Posted October 17, 2020 9 minutes ago, wirey33 said: Those boxes are also exactly the right size for Humbrol tinned paint. I should also have included keeping left and right side components separate when building Walschearts valve gear...... 1 Link to post Share on other sites More sharing options...
Steamport Southport Posted October 17, 2020 Share Posted October 17, 2020 (edited) If you get the 16 choc boxes they are just the right size for a pair of panniers. Other small locomotives also fit. Edited October 17, 2020 by Steamport Southport 1 Link to post Share on other sites More sharing options...
Les Bird Posted October 17, 2020 Share Posted October 17, 2020 1 hour ago, wirey33 said: I wish you could buy that cheaply in litre bottles... Just under a tenner for a litre bottle from Amazon. I ordered two today with free shipping. 1 Link to post Share on other sites More sharing options...
Ray Von Posted October 17, 2020 Share Posted October 17, 2020 (edited) Double sided tape is great for initial track laying, it allows for repositioning until your absolutely sure that you're sure... It's also great for precision spray painting of small model components - just apply a strip to a piece of scrap cardboard, then gently press your model parts (window frames, lamp posts etc) onto the tape - it doesn't even have to all be in contact, in fact applying it off-centre can aid removal - and then you can spray freely without things blowing away! Also, with it being on a piece of card, you can manoeuvre and paint quite freely from almost all sides (if you don't mind getting a painted thumb!) Edited October 17, 2020 by Ray Von 1 1 Link to post Share on other sites More sharing options...
Bluemonkey presents.... Posted October 17, 2020 Share Posted October 17, 2020 IPA just under £7 per 1ltre. https://www.ebay.co.uk/itm/IPA-Isopropyl-99-JERRY-CONTAINER-1-LITRE-Isopropanol-1L/232521119280?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 Never been brave enough to buy/use any as I dont really know what I should be doing with chemicals, always happy to be educated. Foil wrap of fizzy wine can be flattened out to form weigh bridge plates or something similar. I often use double sided when spraying great 'helping hand'. 1 Link to post Share on other sites More sharing options...
Moderators AY Mod Posted October 17, 2020 Moderators Share Posted October 17, 2020 On the workbench I use an A2-sized non-slip washable silicone mat with an edging lip when dealing with small parts. It's a dog feeding mat. 8 5 Link to post Share on other sites More sharing options...
RMweb Gold Dagworth Posted October 17, 2020 RMweb Gold Share Posted October 17, 2020 28 minutes ago, Ray Von said: (if you don't mind getting a painted thumb!) If you don't get paint on your hands at some point it's not real modelling Andi 7 1 Link to post Share on other sites More sharing options...
Sotto Posted October 17, 2020 Share Posted October 17, 2020 1 hour ago, Dagworth said: If you don't get paint on your hands at some point it's not real modelling Andi That's a whole new topic. I'll add 'getting a trackpin (or other sharp object) stuck behind your thumbnail.' 1 Link to post Share on other sites More sharing options...
RMweb Premium ColinK Posted October 17, 2020 RMweb Premium Share Posted October 17, 2020 Or knocking you hot soldering iron off your workbench and catching it by the hot end. 3 1 1 1 Link to post Share on other sites More sharing options...
Jeff Smith Posted October 18, 2020 Share Posted October 18, 2020 Dollar Store (Pound Shop) bulk emory boards. Safety flux used for stained glass lead soldering. Cheap from craft shops and friendly to use. 1 Link to post Share on other sites More sharing options...
RMweb Gold Huw Griffiths Posted October 18, 2020 RMweb Gold Share Posted October 18, 2020 On 16/10/2020 at 18:47, The Johnster said: I have a set of brightly coloured pound shop children's paint brushes, though I don't have (or want) the brightly coloured pound shop. children to go with them, which are hopeless for painting with, as they have very stiff thick nylon 'hairs'. If you're talking the small ones, there just might be a painting use for them - simulating woodgrain. You might wish to experiment first on a scrap of plastic - start with a suitable base colour (either self coloured plastic or 1 smooth coat / 2 thin rough ones - you don't need the best brushes for this) - then use a small, cheap brush to drag one rough coat of a suitable "contrast" / "grain" colour in one direction. This is one of the few painting jobs for which the stiffness / lack of finesse of the plastic bristles can be a distinct plus point. 3 2 Link to post Share on other sites More sharing options...
PatB Posted October 18, 2020 Share Posted October 18, 2020 It's been mentioned on RMWeb before, and isn't my idea, but I think it bears repeating. Lego bricks (other brick construction systems are available) can be used to construct all sorts of accurately right-angled jigs and fixtures. 5 4 4 Link to post Share on other sites More sharing options...
RMweb Premium ELTEL Posted October 18, 2020 RMweb Premium Share Posted October 18, 2020 16 hours ago, AY Mod said: On the workbench I use an A2-sized non-slip washable silicone mat with an edging lip when dealing with small parts. It's a dog feeding mat. I take it the dogs food manners have now improved so it is eating of a tray watching the tv like the rest of us T 2 3 Link to post Share on other sites More sharing options...
Ray Von Posted October 18, 2020 Share Posted October 18, 2020 (edited) I know one bit of kit that I could never get on with, the "Helping Hands" with magnifying glass! AVOID!!! Couldn't get the hang of it, the crocodile clips were too vicious and would crush anything placed in them (even with silicone tube slipped over their nasty little nippers!) And whenever I tried to paint any detail on something that was on the other side of the magnifying lens, I lost all depth perception and coordination!! It was like a Generation Game challenge to me, so I think I Charity Shopped it... Cheaper option, clothes peg - clip your chosen bit of model kit in, apply paint detail by eye and then leave the peg and bit of model somewhere warm to dry. Edited October 18, 2020 by Ray Von 3 5 1 Link to post Share on other sites More sharing options...
RMweb Gold tomparryharry Posted October 18, 2020 RMweb Gold Share Posted October 18, 2020 16 hours ago, Bluemonkey presents.... said: IPA just under £7 per 1ltre. £7 a litre for IPA? I'm not drinking at that pub.... 5 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now