Jump to content
 

Road Vehicles. Which Gaps Need Filling?


ChrisB

Recommended Posts

Frank Wallers Road Transport Images range has a Bedford TM kit in both versions. He also does a Scania 80 in sleeper version but no 82/ 112/ 113 As yet. Frank regarded th Foden S80 as the ugliest thing he'd produced so far, and it took some doing to get that into the range, I suspect the Scanias will be an even bigger challenge. To my mind they have the looks only a swedish engineer could love.

A 112 is an easy conversion from a 113 assuming it is not the streamline version, the low datum cab is a harder conversion so would best be served through RTi.

Link to post
Share on other sites

  • 3 weeks later...

There is a Skoda Estelle made by Abrex in 1/72 scale.

If you can live with the slight over scale, the Abrex range is particularly good. As well as the Estelle, they do the 105 and the original Octavia from the 60s/ 70s/ 80s not to mention the full range from the 90s and beyond.

Link to post
Share on other sites

  • 2 months later...

id like to see from the 70s 80s and 90s

 

Austin maxi (someone should do a maxi model keep hoping oxford do one )

oxford are doing the 1300gt I assume it will also come out as a 1100 and the a60

Austin 1800

Austin meastro 

Rover p5b and p5b coupe

Rover SD1 (personal favourite had 2)

ford Cortina mk4/5

Sherpa van high top BR like wwhat my dad used o come home in

astra van astra max again my dad had BR ones

escort mk4 van

Triumph TR7 (inca yellow would be nice match the one im buying ) 

finally for obvious reasons (see profile pic) the good old ford Orion mk2

a TVR chimera is probably asking for bit to much haha ( be nice if I could have my car on my layout I could have it broken down waiting for recovery!!) 

sorry if that was bit too much but thought id put my bit in lol  

iv also got a thing for British Leyland

 

Cheers

Phil

Link to post
Share on other sites

  • RMweb Premium

Oxford do a 3 wheel milk float of the type that was around from 1960-1990. Classix do a 4 wheel milk float thats suitable for the period 1950-1980. Electric milk floats lasted for a long time, a 50 year lifespan was and is not unusual. Batteries are easy to replace and motors require little maintenance beyond the replacement of brushes. A few years ago a local dairy had what appeared to be personal number plates on its milk floats where in fact they were the originals, the bodies had been rebuilt to a more modern appearance but it was still the old 30 to 40 year old chassis underneath.

Link to post
Share on other sites

  • 4 weeks later...

Have sent an email to Oxford Diecast asking for

 

A short wheelbase Ford Cargo crew carrier based on their recent slightly longer Ford Cargo.

 

https://www.flickr.com/photos/merf29/5170670096/in/album-72157625373519212

 

And

 

A Rover SD1, including a police one.

 

http://www.gtm.org.uk/welcome/2015-exhibits/rover-sd1-vitesse/

 

You can only ask, or get out your craft knife I suppose......

Link to post
Share on other sites

Have sent an email to Oxford Diecast asking for

 

A short wheelbase Ford Cargo crew carrier based on their recent slightly longer Ford Cargo.

 

https://www.flickr.com/photos/merf29/5170670096/in/album-72157625373519212

 

And

 

A Rover SD1, including a police one.

 

http://www.gtm.org.uk/welcome/2015-exhibits/rover-sd1-vitesse/

 

You can only ask, or get out your craft knife I suppose......

 

Saved me sending that photo myself :good_mini:

Link to post
Share on other sites

When they did the range of Bedford P Ways a few years ago I was sure they would do one of the short wheelbase versions, I kept hoping, but they never did the only one I wanted!

 

The short wheelbase of the type in my post above were as far as I can recall the most common type. Would it be cheeky to ask for a ScotRail version?

Link to post
Share on other sites

Got a polite email thanking me for my suggestions and advising me they will be added to the wish list for consideration.

 

I remember that in the past you would get an email from Taff himself, sometimes with a bit of banter. I recall once he replied and either included a photo of something they were working on or he told me something about a proposal which had not been released!

 

I guess as they have grown and no doubt have taken on additional staff, you tend to get a more corporate, safe and dare I say predictable response.

 

Certainly better than Heljan who once replied to a query about new models with the advice to buy a catalogue.

Link to post
Share on other sites

  • 2 weeks later...
Guest nzflyer

I wouldn’t mind having a Willys Jeep that isn’t kit built. They’d go great in a range of military patterns (Western Desert, Italy, Middle East, India, Pacific, Eastern Front, Home Forces, Europe 1944-1945) as well as civilian colours. I’m not sure what their use would be in a post-war England but here in New Zealand they were used as fire fighting vehicles, farm trucks and Follow Me vehicles at the larger airfields. 

Link to post
Share on other sites

  • RMweb Premium

A friend of mine is producing laser cut building parts in card/MDF/wood for model railways on a commercial basis. I asked him at the weekend if he would consider making a livestock carrying bodywork to fit on to EFE, Oxford, Trackside and other model lorries. He was interested and asked me to find some illustrations of such vehicles. This I have done and the pleasant surprise was that many of these bodies were demountable, sitting on a flat bed lorry like a container. A one-size-fits-all looks a distinct possibility despite some slight variations in the different manufacturers dimensions, Oxford and Trackside are virtually the same EFE are slightly smaller. Would anyone be interested if it was produced on a commercial basis?

Link to post
Share on other sites

  • 2 weeks later...

Then there is  accuratescalemodels.com  know as A S Models  which has been producing models for over 40 years  and did have  webs site that was accessible via the u k model shop directory  but the company that owned the server sold it and did not inform any one so now A S Model have their own brand new website . and production will restart in APRIL 2015 WELL WORTH A LOOK AT some very exciting models and being added to all the time  IT IS UP AND RUNNING BUT STILL BEING BUILT  JUST GOOGLE IT  accuratescalemodels.com    There was also a site came up on Google if you entered 1/76 scale vintage vehicles and bear in mind vintage means 25 years or older

Looking forward to receiving my 4 x 2 Green Goddess when you get back into production.

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...