RMweb Gold Phil Bullock Posted October 16, 2022 Author RMweb Gold Share Posted October 16, 2022 9 hours ago, Liam said: Cracking mix of motive power Phil, I do hope they’ll be given plenty of chances to stretch their legs on Mk2! Eventually…. But chips needed 2 Link to comment Share on other sites More sharing options...
KeithHC Posted October 16, 2022 Share Posted October 16, 2022 2 hours ago, Phil Bullock said: Eventually…. But chips needed With or without a battered sausage. Keith 1 3 Link to comment Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted October 16, 2022 Author RMweb Gold Share Posted October 16, 2022 1 hour ago, KeithHC said: With or without a battered sausage. Keith Definitely with! But no nasty soggy ones…. 1 2 2 2 Link to comment Share on other sites More sharing options...
Andy 17 Posted October 16, 2022 Share Posted October 16, 2022 21 hours ago, Phil Bullock said: No layout or loco work for the last 48 hours…. Had the pleasure of a visit from @Andy 17 and his good lady yesterday ….. fettled the DCC settings on his 009 loco and had a good waffle, and thanks both for the cream teas. Really enjoyed those last night. It was good to catch up with you Phil. Thanks for all the fettling, Bridget now runs a lot smoother. Glad to hear you enjoyed the cream teas. 1 Link to comment Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted October 31, 2022 Author RMweb Gold Share Posted October 31, 2022 Fine weather has meant more scenic progress …. Scenic boards 4 5 and 6 have been sealed with PVA, board 7 has terrain as do 8 and 9 although a bit more work needed on them. Here are boards 6 & 7 which shows how much more flowing the scenery will be than on the old layout…. Definitely more rolling Worcestershire than Yorkshire dales! Will need to find some paint soon …. Any recommendations for Earth colour, thinking burnt sienna. 14 Link to comment Share on other sites More sharing options...
Liam Posted October 31, 2022 Share Posted October 31, 2022 The scenery looks spot on for Abbotswood Phil, now that I’m used to traversing it on journeys to and from Devon. Now about adding some birdsong... 😀 4 Link to comment Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted October 31, 2022 Author RMweb Gold Share Posted October 31, 2022 1 hour ago, Liam said: The scenery looks spot on for Abbotswood Phil, now that I’m used to traversing it on journeys to and from Devon. Now about adding some birdsong... 😀 Cheers! It does suffer from compression particularly front to back but much easier to get flowing topography with XPS sheet than with plywood risers and chicken wire… I keep planting bird seed at home but none ever grow…. 3 1 Link to comment Share on other sites More sharing options...
RMweb Gold 5BarVT Posted October 31, 2022 RMweb Gold Share Posted October 31, 2022 The ski jump looks quite a fearsome gradient - or is it just the camera angle? Paul. 2 Link to comment Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted October 31, 2022 Author RMweb Gold Share Posted October 31, 2022 19 minutes ago, 5BarVT said: The ski jump looks quite a fearsome gradient - or is it just the camera angle? Paul. Its 1:60 Paul… the topography around it falls away initially which makes it look steeper I think 2 1 Link to comment Share on other sites More sharing options...
RMweb Gold PjKing1 Posted October 31, 2022 RMweb Gold Share Posted October 31, 2022 Coming along nicely Phil 1 Link to comment Share on other sites More sharing options...
RMweb Gold 5BarVT Posted October 31, 2022 RMweb Gold Share Posted October 31, 2022 10 minutes ago, Phil Bullock said: Its 1:60 Paul… the topography around it falls away initially which makes it look steeper I think Having looked (properly this time!) it’s the topography that was getting me. It looked steeper than my 1:33! Paul. 1 Link to comment Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted November 3, 2022 Author RMweb Gold Share Posted November 3, 2022 Doing electrical work on fiddle yard board 7 today …. With points. Wired it all up only to get shorts when testing. After telling folks to wire points with live frogs and stock rail jumpers guess what ….. I had forgotten to break the link wires spanning the insulating break. Stupid boy…. 1 9 Link to comment Share on other sites More sharing options...
RMweb Gold 5BarVT Posted November 3, 2022 RMweb Gold Share Posted November 3, 2022 Done that, and not found it until glued solidly. Razor saw will pull the spot welded jumper off then you can get the other end with pliers. Paul. 2 Link to comment Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted November 3, 2022 Author RMweb Gold Share Posted November 3, 2022 34 minutes ago, 5BarVT said: Done that, and not found it until glued solidly. Razor saw will pull the spot welded jumper off then you can get the other end with pliers. Paul. Ah I just cut the stock rails on the switch side of the insulating break with the dremmel … not the first time! 2 1 Link to comment Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted November 16, 2022 Author RMweb Gold Share Posted November 16, 2022 (edited) More progress with scenery and electrics …. On the scenery front now need to build the Abbotswood road bridge to ensure the embankment slope and height of topography are correct in that location. On the electrics front finished OWW wiring on board 9 yesterday …. And also added protection to the exits from the two up B&G short sidings on the same board - that’s them top right, ideal for storing short trains to send scooting around whilst loops are sorted out… light loco, DPU, route learner, inspection saloon etc This protection is key to preventing short circuits if operators inadvertently try to exit a siding without selecting the correct route . With frogs powered off the cobalt Digitals this would precipitate an immediate short circuit halting all other traffic. On the old layout with frog juicers you could get away with it electrically although derailment usually followed. For protection I have installed these… A DCC controlled switch controlling the power to the track section in advance of the point. Each is actually two switches with separate DCC accessory addresses. As installed in the sidings these just switch track power on or off - integrating them in to routes means operators won’t be able to move a train off without setting the appropriate route. Next step is to look at using them on the loops. That’s a different ball game as the dead sections have to stop trains as well as controlling their starting …. And locos fitted with stay alives risk proceeding through a dead section. Time to explore asymmetrical braking sections I think….. Of course DCC (Don’t Confuse Clive) wiring is simple 😀 ! Aim is to ensure we put on a good show when we are out and minimise the risk of operator errors within my limited knowledge of electronics. Hopefully if this all works as planned operators will be able to forget a train once it is clear of the fiddle yard entry points as it will halt automatically…. And will be able to switch attention to the next train to keep something moving to keep the punters happy. Edited November 16, 2022 by Phil Bullock Clarity 14 Link to comment Share on other sites More sharing options...
RMweb Gold Downendian Posted November 16, 2022 RMweb Gold Share Posted November 16, 2022 Great stuff Phil. “Operators inadvertently exiting sidings without selecting correct route” I’m guilty of that one for sure on Abbotswood I! Can’t wait to see the full set up. Neil 1 Link to comment Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted November 16, 2022 Author RMweb Gold Share Posted November 16, 2022 2 hours ago, Downendian said: Great stuff Phil. “Operators inadvertently exiting sidings without selecting correct route” I’m guilty of that one for sure on Abbotswood I! Can’t wait to see the full set up. Neil You are not alone my friend…. The owner is just as culpable 😉 1 2 Link to comment Share on other sites More sharing options...
Liam Posted November 16, 2022 Share Posted November 16, 2022 3 hours ago, Downendian said: Great stuff Phil. “Operators inadvertently exiting sidings without selecting correct route” I’m guilty of that one for sure on Abbotswood I! Can’t wait to see the full set up. Neil Or just as bad, as has happened to me on a few occasions with different layouts, “Operators inadvertently hitting a siding’s dead end without selecting correct route”... 3 Link to comment Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted November 16, 2022 Author RMweb Gold Share Posted November 16, 2022 1 minute ago, Liam said: Or just as bad, as has happened to me on a few occasions with different layouts, “Operators inadvertently hitting a siding’s dead end without selecting correct route”... And probably prototypical! 1 1 1 Link to comment Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted November 16, 2022 RMweb Gold Share Posted November 16, 2022 52 minutes ago, Phil Bullock said: And probably prototypical! Judging by the Bristol Yard at Severn Tunnel Jcnm it was 100% prototypical. However it was far more hair-raising one day at Radyr when one of mu.y Train Meeters backed the afternoon Margam into a road containing 70+SLUs of empty tank cars instead of going down an empty road. I heard one heck of a bang, leapt to the office window and the first thing I saw was a Grampus about 12 feet up in the air on its way back down. As the Canton vans couldn't get to the site because the Up Relief was blocked by derailed wagons in the Margam I had to hone my re-railing skills getting things back on the road without breaking them or anything else. A Hyfit full of concrete sleepers made a quite an alarming noise when it dropped back on the road after I'd had buffer securing bolts gas-axed at both ends to make buffers fall off - fortunately it dropped exactly where I wanted it to (re-railed all wheels). The other wagons I did were only off one pair of wheels so it was out with old bits of sleeper, old fishplates, and some steel plate and carefully working out whether to push or pull (or push and then pull). Incidentally old fishplates were always useful when re-railing because they were hard enough to support a wheel when it ran onto them although they then usually broke once the weight was on the middle of the fishplate but with luck the wheel dropped in the right place. 4 4 1 Link to comment Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted November 24, 2022 Author RMweb Gold Share Posted November 24, 2022 101 things to do with a bottle of beer… Number 72 … former for a bridge arch 3 2 Link to comment Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted November 24, 2022 RMweb Gold Share Posted November 24, 2022 42 minutes ago, Phil Bullock said: 101 things to do with a bottle of beer… Number 72 … former for a bridge arch Best thing to do with that weasel bandy!, anything but drink it. Mike. 1 Link to comment Share on other sites More sharing options...
RMweb Gold PjKing1 Posted November 24, 2022 RMweb Gold Share Posted November 24, 2022 53 minutes ago, Enterprisingwestern said: Best thing to do with that weasel bandy!, anything but drink it. Mike. 😲😲😲🍺🍺🍺 Link to comment Share on other sites More sharing options...
RMweb Gold Phil Bullock Posted November 24, 2022 Author RMweb Gold Share Posted November 24, 2022 2 hours ago, Enterprisingwestern said: Best thing to do with that weasel bandy!, anything but drink it. Mike. With you on that one Mike! Lucky this bottle of proper beer didn’t fit so I had to drink it…. Cheers! 6 2 1 Link to comment Share on other sites More sharing options...
Liam Posted November 24, 2022 Share Posted November 24, 2022 29 minutes ago, Phil Bullock said: With you on that one Mike! Lucky this bottle of proper beer didn’t fit so I had to drink it…. Cheers! A bottle of Ampleforth ale might fit in that gap though... 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now