Jol Wilkinson Posted January 8, 2019 Share Posted January 8, 2019 x7 cant This is becoming something of a "who can p*ss further" competition. Can Autocad export in CorelDraw or Illustrator format? Does it actually matter? Of the three major etch companies supplying the model railway kit manufacturers, two PEC and PPD accept Autocad, CorelDraw and Illustrator created files as well as pdfs. Grainge and Hodders site doesn't specify but I believe the same applies. Micro Precision do the same but effectively priced themselves out of the model railway kit market some years ago. So as long as you can export/save artwork files in one of those formats (without errors occuring in the process), then it is immaterial which design software you use. 1 1 Link to post Share on other sites More sharing options...
twiggy1969 Posted January 8, 2019 Share Posted January 8, 2019 This is becoming something of a "who can p*ss further" competition. Can Autocad export in CorelDraw or Illustrator format? Does it actually matter? Of the three major etch companies supplying the model railway kit manufacturers, two PEC and PPD accept Autocad, CorelDraw and Illustrator created files as well as pdfs. Grainge and Hodders site doesn't specify but I believe the same applies. Micro Precision do the same but effectively priced themselves out of the model railway kit market some years ago. So as long as you can export/save artwork files in one of those formats (without errors occuring in the process), then it is immaterial which design software you use. if you cared to read the conversation was about it being used on my laser not etching at any of the above however we do seem to have gone a bit off topic Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted January 9, 2019 RMweb Premium Share Posted January 9, 2019 (edited) however we do seem to have gone a bit off topic Can we go back to how to eat at an elephant then? Edited January 9, 2019 by Hal Nail Link to post Share on other sites More sharing options...
RMweb Gold chris p bacon Posted January 9, 2019 RMweb Gold Share Posted January 9, 2019 Can we go back to how to eat at an elephant then? With Brown sauce 1 1 Link to post Share on other sites More sharing options...
eagleeyemark Posted September 23, 2019 Share Posted September 23, 2019 Could someone point out in this thread on which page the conversation derailed from Falcon Brass to CAD programmes? I would like to know if there has been any improvement from Falcon in supply without trawling through irrelevant pages. 1 1 Link to post Share on other sites More sharing options...
kandc_au Posted September 23, 2019 Share Posted September 23, 2019 Go to Page 4 2nd Jan Lofty posted he got his refund. Khris Link to post Share on other sites More sharing options...
RMweb Gold chris p bacon Posted September 23, 2019 RMweb Gold Share Posted September 23, 2019 32 minutes ago, eagleeyemark said: I would like to know if there has been any improvement from Falcon in supply without trawling through irrelevant pages. There is no supply from Falcon, the range has been withdrawn. http://www.falconbrassworks.com The website has not been updated for over 12 months which was when the range was withdrawn. Link to post Share on other sites More sharing options...
eagleeyemark Posted September 23, 2019 Share Posted September 23, 2019 Thanks Chris Very disappointing. Only managed to obtain a single kit, GWR Dia AA1 6 Wheeled Brake Van. Link to post Share on other sites More sharing options...
GeoffAlan Posted September 23, 2019 Share Posted September 23, 2019 On 14/05/2018 at 13:27, PenrithBeacon said: In his quiz programme of yonks ago Humphrey Lyttleton used to have a fictitious assistant called Samantha A 'friendly' girl by all accounts she was 'No better than she ought to be'! Link to post Share on other sites More sharing options...
Brighty1674 Posted September 23, 2019 Share Posted September 23, 2019 If dart castings are visiting any exhibitions or shows, contact them and he will bring kits he has left from the range, I have purchased numerous gwr wagon kits this way........I do not know how the supply of locos and tenders is......I have found the owner very friendly and agreeable in this respect.....Dave brighty..... Link to post Share on other sites More sharing options...
eagleeyemark Posted September 23, 2019 Share Posted September 23, 2019 2 minutes ago, Brighty1674 said: If dart castings are visiting any exhibitions or shows, contact them and he will bring kits he has left from the range, I have purchased numerous gwr wagon kits this way........I do not know how the supply of locos and tenders is......I have found the owner very friendly and agreeable in this respect.....Dave brighty..... Not much use to me, I'm in the Antipodean Colony! Link to post Share on other sites More sharing options...
RMweb Premium Blandford1969 Posted April 8, 2020 RMweb Premium Share Posted April 8, 2020 As Falcon Brass no longer exists does anyone know where it is possible to source Highland tender iracier axleboxes? Link to post Share on other sites More sharing options...
McW Posted April 8, 2020 Share Posted April 8, 2020 Try Lochgorm Kits. The website isn’t up and running but you can email enquiries@lochgormkits.co.uk Paul 1 Link to post Share on other sites More sharing options...
RMweb Premium Michael Edge Posted April 8, 2020 RMweb Premium Share Posted April 8, 2020 We have GC Iracier axlebox cover etches, could you use these on HR castings? Apart from the lettering (which isn't clearly visible in this scale) they are the same. 1 Link to post Share on other sites More sharing options...
Portchullin Tatty Posted April 8, 2020 Share Posted April 8, 2020 2 hours ago, McW said: Try Lochgorm Kits. The website isn’t up and running but you can email enquiries@lochgormkits.co.uk Paul I suspect that Charlie (the new owner of Lochgorm) will have them although he is struggling to get to grips with the range a little bit. Contact is as per PAul's email. Mark 1 Link to post Share on other sites More sharing options...
Staffordshire Posted June 4, 2020 Share Posted June 4, 2020 (edited) Hello, I would just like to make any interested parties aware of the situation I have encountered with Falcon Brass over the past 2 months .... Basically I contacted the Owner, hoping to try and find if there was anyway of obtaining 4 or 5 of the kits/etches that they used to apparently have available. After an initial positive helpful phone call, I was given hope and promises that I would be contacted back and given updates. After another 4 phone calls which I instigated, I was given promises etc that just have not come to fruition, finally today I lost patience. The way this 'man' treats people who actually want to be Customers, is a complete disgrace. Enough said. Ian Edited June 4, 2020 by Staffordshire Tidying up paragraph breaks hopefully Link to post Share on other sites More sharing options...
RMweb Premium cctransuk Posted June 4, 2020 Author RMweb Premium Share Posted June 4, 2020 5 minutes ago, Staffordshire said: Hello, I would just like to make any interested parties aware of the situation I have encountered with Falcon Brass over the past 2 months .... Basically I contacted the Owner, hoping to try and find if there was anyway of obtaining 4 or 5 of the kits/etches that they used to apparently have available. After an initial positive helpful phone call, I was given hope and promises that I would be contacted back and given updates. After another 4 phone calls which I instigated, I was given promises etc that just have not come to fruition, finally today I lost patience. The way this 'man' treats people who actually want to be Customers, is a complete disgrace. Enough said. Ian To the best of my knowledge, the owner of Falcon Brass is a lady by the name of Samantha. John Isherwood. Link to post Share on other sites More sharing options...
Paul Cram Posted June 4, 2020 Share Posted June 4, 2020 8 minutes ago, Staffordshire said: Hello, I would just like to make any interested parties aware of the situation I have encountered with Falcon Brass over the past 2 months .... Basically I contacted the Owner, hoping to try and find if there was anyway of obtaining 4 or 5 of the kits/etches that they used to apparently have available. After an initial positive helpful phone call, I was given hope and promises that I would be contacted back and given updates. After another 4 phone calls which I instigated, I was given promises etc that just have not come to fruition, finally today I lost patience. The way this 'man' treats people who actually want to be Customers, is a complete disgrace. Enough said. Ian Have you read this thread? Link to post Share on other sites More sharing options...
RMweb Gold chris p bacon Posted June 4, 2020 RMweb Gold Share Posted June 4, 2020 1 hour ago, cctransuk said: To the best of my knowledge, the owner of Falcon Brass is a lady by the name of Samantha. John Isherwood. She was not the owner listed with companies house. https://beta.companieshouse.gov.uk/company/07644987/officers but there is a familial link to Dart Castings https://beta.companieshouse.gov.uk/company/06216403/officers Link to post Share on other sites More sharing options...
RMweb Premium cctransuk Posted June 4, 2020 Author RMweb Premium Share Posted June 4, 2020 3 minutes ago, chris p bacon said: She was not the owner listed with companies house. https://beta.companieshouse.gov.uk/company/07644987/officers but there is a familial link to Dart Castings https://beta.companieshouse.gov.uk/company/06216403/officers I think that story was that Samantha took on the running of Falcon Brass as a home-working project, so that she could also look after her disabled child. It became clear, quite quickly, that she could not cope with both responsibilities and so long delays / failure to receive correct goods became inherent with placing orders. This generated negative postings here, which were cited by Samantha as her reason for ceasing to trade. All rather messy! Given the family connection, how about Dart Castings / MJT Components, etc.? Has anyone placed an order lately? If so, what was the service like? John Isherwood. 1 Link to post Share on other sites More sharing options...
pete_mcfarlane Posted June 4, 2020 Share Posted June 4, 2020 1 minute ago, cctransuk said: Given the family connection, how about Dart Castings / MJT Components, etc.? Has anyone placed an order lately? If so, what was the service like? John Isherwood. My last order came in about a week or so, and that was when the post was a bit iffy in the early stages of the lockdown. Link to post Share on other sites More sharing options...
RMweb Premium cctransuk Posted June 4, 2020 Author RMweb Premium Share Posted June 4, 2020 Just now, pete_mcfarlane said: My last order came in about a week or so, and that was when the post was a bit iffy in the early stages of the lockdown. That is reassuring - MJT and ABS components have been the basis of my rolling stock building for decades. Fortunately, I have a fair stock of the latter, but I'm hoping that someone can take on that part of Adrian's range in due course. Sad to think that he's no longer with us; I'll miss his outraged e-mails every time a new RTR product was released. John Isherwood. Link to post Share on other sites More sharing options...
CHARLIE5 Posted June 4, 2020 Share Posted June 4, 2020 I have had two orders with Dart/MJT since March, the most recent in May. Both arrived within a week. Postal delivery times have been erratic so I was impressed with the service. Quicker than some others. Link to post Share on other sites More sharing options...
RMweb Premium cctransuk Posted June 4, 2020 Author RMweb Premium Share Posted June 4, 2020 24 minutes ago, CHARLIE5 said: I have had two orders with Dart/MJT since March, the most recent in May. Both arrived within a week. Postal delivery times have been erratic so I was impressed with the service. Quicker than some others. It's such a shame that the same management can't be applied to Falcon Brass. I can see that holding stock of expensive etches would not be viable, but I would have thought that it would be possible to offer the range on an expression of interest basis. Once sufficient prospective orders were received for a particular subject to make it viable to order the etches, a 50% deposit could be taken, with the balance payable when the kits were ready for despatch. This has been done by other kit producers. Not likely, though, I'd guess. John Isherwood. 1 Link to post Share on other sites More sharing options...
Steamport Southport Posted June 4, 2020 Share Posted June 4, 2020 (edited) I had hoped the better of the kits would have found their way into the main range by now. I think the GWR Gas Tank was only revamped about five years ago as it was featured as a new kit in the magazine that Bob Barlow started before his death. Finescale Model Railway Review I think it was called. http://www.falconbrassworks.com/details.php?code=WK128 Although it might have been the other Gas Wagon. http://www.falconbrassworks.com/details.php?code=WK127 Jason Edited June 4, 2020 by Steamport Southport Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now